Volvo EC15b Advice - my first digger!

[Mick-the-fitter]

Engine mounts softer than the exhaust tail pipe mounts!!

 

[Big Dunk]

so what's wrong with what you have and why new cylinders for the s/h unit? thought you were after your first digger, or'd you buy one with issues?

retro fitting a volvo boom and dipper on an old powerfab digger
was looking for info so that i can get new cylinders

 

[V8Druid]

retro fitting a volvo boom and dipper on an old powerfab digger
was looking for info so that i can get new cylinders

Got any pix .... sounds an interesting challenge .....

 

[CPS]

retro fitting a volvo boom and dipper on an old powerfab digger
was looking for info so that i can get new cylinders

@V8Druid did I send you a manual some time back? It just may have the info in it..... or some of it anyway

 

[V8Druid]

@V8Druid did I send you a manual some time back? It just may have the info in it..... or some of it anyway

PDF or paper? and how long ago ...... don't recall one and can't see why ? deffo not got a paper one

OK .... just looked and I have a 40+Mb workshop manual for an ec15b, which I have split into 7 PDF files ... I'll see if it'll load, but doubt it

well they did ... assuming they'll open

 

[V8Druid]

missed one, but don't know which ... let me know if it's relevant or someone wants the whole shooting match...
they're PDF-ed :-
P1 to 99,
100 to 200,
200 to 300,
300 to 400,
400 to 500,
500 to 580,
580 to 662

edit
just looked and here's the missing one .. the last one

 

[V8Druid]

interesting drawings on page 3 and 4 of the last PDF @Big Dunk .... should be able to work summat from them

 

[Big Dunk]

cylinder info required

 

[V8Druid]

cylinder info required

dare say somewhere in those PDFs are the cylinder spec.s .... just need to wade through it all