Grass reinforcement grid

Furniss

Furniss

Well-known member
Those Ibran grids look good, if they can be laid on soil rather than sub base that would be a big benefit.


"First prepare your surface by digging out an area to a 40mm depth, assemble your grids within the hole and simply re-fill with any soil and seed combination that suits you. Alternatively, lay the grids directly onto free draining, compacted ground and fill.

For the very best results, you may want to consider a 50-80mm sub base of type 1 MOT."

WIth how wet it is at the moment I wouldn't need a roller anyway, could just push them in with my boot.
Make sure you're paid upfront 😀
 
craig

craig

Well-known member
"First prepare your surface by digging out an area to a 40mm depth, assemble your grids within the hole and simply re-fill with any soil and seed combination that suits
I put some down around some horse field shelters, and done exact that, or rather that`s what the customer wanted. they are chuffed with the outcome and want some more doing, its just to wet at the moment.
 
Left hooker

Left hooker

Well-known member
We have this stuff down for the horses as a hard standing
 
Left hooker

Left hooker

Well-known member
This is the stuff we use at the horses for hard standing 60t rated

IMG_20240413_161058.jpg


IMG_20240413_161107.jpg


IMG_20240413_161110.jpg
 
Storrsy

Storrsy

Well-known member
Those Ibran grids look good, if they can be laid on soil rather than sub base that would be a big benefit.


"First prepare your surface by digging out an area to a 40mm depth, assemble your grids within the hole and simply re-fill with any soil and seed combination that suits you. Alternatively, lay the grids directly onto free draining, compacted ground and fill.

For the very best results, you may want to consider a 50-80mm sub base of type 1 MOT."


WIth how wet it is at the moment I wouldn't need a roller anyway, could just push them in with my boot.
My turn now- been asked to do an informal footpath through a churchyard. Initially quoted to use scalpings- I think ithe only proviso being it needs to be able to accommodate wheelchairs. Anyway scalpings or 803 is straightforward but now they're making noises about grass grids- I assume so it blends in better. But certainly going to be more costly and a fiddle to get it looking good as surrounding ground is slightly undulating. My instinct is to just say no to using grids as don't think they'll do a decent job. Hmm other options. Personally I'd just like to put Growan (decomposed granite ) down and rake any larger particles out before compacting as think this will leave a nice usable rustic path in keeping with a moorland church.
 
S

Smiffy

Well-known member
My turn now- been asked to do an informal footpath through a churchyard. Initially quoted to use scalpings- I think ithe only proviso being it needs to be able to accommodate wheelchairs. Anyway scalpings or 803 is straightforward but now they're making noises about grass grids- I assume so it blends in better. But certainly going to be more costly and a fiddle to get it looking good as surrounding ground is slightly undulating. My instinct is to just say no to using grids as don't think they'll do a decent job. Hmm other options. Personally I'd just like to put Growan (decomposed granite ) down and rake any larger particles out before compacting as think this will leave a nice usable rustic path in keeping with a moorland church.

I've never seen grass grids that I would truly class as wheelchair friendly
 
groundworker

groundworker

Well-known member
The job I was quoting was undulating too so I didn't quote it all that cheap as I knew it would be more faffing about, or more dig/aggregates trying to make it look flat. Ground was way too wet to get away with levelling existing topsoil.

I didn't hear anything back.
 
Storrsy

Storrsy

Well-known member
The job I was quoting was undulating too so I didn't quote it all that cheap as I knew it would be more faffing about, or more dig/aggregates trying to make it look flat. Ground was way too wet to get away with levelling existing topsoil.

I didn't hear anything back.
Sounds like that was probably for the best!
 
TiltyShaun

TiltyShaun

Well-known member
My turn now- been asked to do an informal footpath through a churchyard. Initially quoted to use scalpings- I think ithe only proviso being it needs to be able to accommodate wheelchairs. Anyway scalpings or 803 is straightforward but now they're making noises about grass grids- I assume so it blends in better. But certainly going to be more costly and a fiddle to get it looking good as surrounding ground is slightly undulating. My instinct is to just say no to using grids as don't think they'll do a decent job. Hmm other options. Personally I'd just like to put Growan (decomposed granite ) down and rake any larger particles out before compacting as think this will leave a nice usable rustic path in keeping with a moorland church.
I think grids could work with a little adjustment to the undulating nature. They would hold the aggregate nicely.
 
Giles

Giles

Well-known member
We do a fair bit of the grass grids for the trust and private ppl, i get them from a mates company in chesterfield GCL or matgrids they’re called, https://www.matsgrids.co.uk/

We’ve used them for just grass and more gravel.

We are taking more and more of the Brendon self bind gravel up as having problems with it not binding and washing out into sandy swampy bits and leaving scars and treading into properties crating mess. Doing more resin bound/bonded for them.
 

Attachments

  • IMG_9156.png
    IMG_9156.png
    547 KB · Views: 123
  • IMG_9155.png
    IMG_9155.png
    889.7 KB · Views: 130
  • IMG_9154.png
    IMG_9154.png
    561.4 KB · Views: 118
  • IMG_9153.png
    IMG_9153.png
    515 KB · Views: 128
  • IMG_9152.png
    IMG_9152.png
    1 MB · Views: 166
  • IMG_9151.png
    IMG_9151.png
    892.6 KB · Views: 119
  • IMG_9150.png
    IMG_9150.png
    925.4 KB · Views: 128
Last edited:
Storrsy

Storrsy

Well-known member
We do a fair bit of the grass grids for the trust and private ppl, i get them from a mates company in chesterfield GCL or matgrids they’re called, https://www.matsgrids.co.uk/

We’ve used them for just grass and more gravel.

We are taking more and more of the Brendon self bind gravel up as having problems with it not binding and washing out into sandy swampy bits and leaving scars and treading into properties crating mess. Doing more resin bound/bonded for them.
That last photo have you got any pics of it finished? What have you filled them with? Are they just laid direct on compacted 803 or is there a layer of sand to bed them on?
 
Giles

Giles

Well-known member
That last photo have you got any pics of it finished? What have you filled them with? Are they just laid direct on compacted 803 or is there a layer of sand to bed them on?
We normally screed some grits and then lay them on that bit for this we just did mot then filled with mot in this application was to stop water washing it away


Some pics in that of screeding them in
 

Attachments

  • IMG_4824.jpeg
    IMG_4824.jpeg
    332.5 KB · Views: 116
  • IMG_4823.jpeg
    IMG_4823.jpeg
    421.7 KB · Views: 108
  • IMG_4828.jpeg
    IMG_4828.jpeg
    369.4 KB · Views: 115
Storrsy

Storrsy

Well-known member
We normally screed some grits and then lay them on that bit for this we just did mot then filled with mot in this application was to stop water washing it away


Some pics in that of screeding them in
So how much is covering the grids? Will it not just become exposed as the covering displaces with time?
 
Top