Simon edwards
Well-known member
I just use a small funnel and a bit of patience,works ok on smaller machines.
V8Druid
do it as well as you can,but learn to do it better
doobin
Well-known member
500ml Chinese takeaway tub under each bung. Drain into these.
Empty the tub and refill it or a new one with clean gear oil. Suck this up with a large medical syringe and then shoot it into the hubs. Easy peasy, takes about three of the largest syringes you can get on eBay.
CPS
Well-known member
Redirect Notice
images.app.goo.gl
I use this
V8Druid
do it as well as you can,but learn to do it better
I have one of these, which I've had for decades ... take some beating TBH
or this is cheap enough
or this is cheap enough
D
DaveDCB
Well-known member
Silverline Spouted Oil Liquid Measuring Pourer Jug 1 Litre 380741 | Sealants and Tools Direct
Discover precision pouring with our 1-litre spouted oil and liquid measuring jug, ideal for workshops and kitchens. Order now for efficient fluid handling!
www.sealantsandtoolsdirect.co.uk
Also have same as @CPS & also a Samoa pump, which is fine if you just use the same oil all the time, I find I always have lots of different oils on the go & cleaning that thing out is a real pain!
SAMOA 16 Litre Hand Operated Oil Bucket Pump | eBay
This hand-operated oil bucket pump Samoa is perfect for lubrication tasks in your garage. With a capacity of 16 litres, it is ideal for use on vehicles and machinery. Samoa manufacturer part number of 320400.
www.ebay.co.uk
doobin
Well-known member
as much as I love my pneumatic oil dispensers for filling Utto into transmissions and axles, these final drive hubs only require a couple hundred ml of gear oil through a very small hole, and a large medical syringe is by far the easiest and cheapest way to do it.
Lancs Lad
Well-known member
Them syringes are an utter lifesaver for all sorts of faffy jobs...the needles some come with are scary though
6
6feetdown
Well-known member
Just ordered a 2 pack syringe 350 and 150ml £10 
V8Druid
do it as well as you can,but learn to do it better
I've always got 100ml ones here ... use one every Monday and have given up keeping them afterwards ... 52 a year mounts up over 12+ yearsJust ordered a 2 pack syringe 350 and 150ml £10
(and a varying selection of needle sizes)
B
bobthebuilder
Well-known member
i have found that the screw top ep90 bottles ,the thread on the end of the pipey bit of the bottles screws directly into my hubs ont he tb 125
D
DaveDCB
Well-known member
Just don’t go jabbing it in your arm after you have had it full of ATF!Them syringes are an utter lifesaver for all sorts of faffy jobs...the needles some come with are scary though
6
6feetdown
Well-known member
They are plastic ends i think so hopefully not super sharp
B
bobthebuilder
Well-known member
morris oils seem ok ,fast fuels raglan ,and they will deliver
6
6feetdown
Well-known member
Any idea on cost? Used to buy from Fast fuel
CPS
Well-known member
Yes, we normally have pallets if it here
V8Druid
do it as well as you can,but learn to do it better
+1 ..... Morris's equally as good
Footer block 1