CPS
Well-known member
*Just a Note*
We stock 20L hydraulic oil here at £38 per drum, Viper brand, UK barrelled oil
We stock 20L hydraulic oil here at £38 per drum, Viper brand, UK barrelled oil
CPS
Well-known member
32 and 46
L
Lee
Well-known member
Can you start on Monday? You’d fit in well here provided when you do eventually grease it you use a whole tube per nipple but then wash it afterwards so the windscreens, door handles and lights get a good coating tooWe do reactive servicing here, if it starts creaking we give it a little grease, if it's down on power we give in new fuel filters, it it needs jump start more than 50 times in a row we get a new battery
L
Lee
Well-known member
And ideally leave all the used cartridges on the welding or sander bench tooCan you start on Monday? You’d fit in well here provided when you do eventually grease it you use a whole tube per nipple but then wash it afterwards so the windscreens, door handles and lights get a good coating too
Giles
Well-known member
This beauty but she still runs sweet as, just need a new tub for back. Jack knifed quad trailer into it. They have a couple of disco 4s for best.Is that the drystone wallers by chance? they had wet pants when they saw mine
Attachments
hiluxman
Well-known member
I need a new tub for my mk6. It's totally rotten. Even the mot man with sunglasses on says no
S
Smiffy
Well-known member
I need a new tub for my mk6. It's totally rotten. Even the mot man with sunglasses on says no
Tray back it !!
D
DaveDCB
Well-known member
Does he drive it while asleep? That seat may as well be flat
I actually got my first surface rust advisory on my last MOT, still plenty for it to go at yet lol
V8Druid
do it as well as you can,but learn to do it better
was my first thought .. HTF does he drive it?Does he drive it while asleep? That seat may as well be flat
I actually got my first surface rust advisory on my last MOT, still plenty for it to go at yet lol
Giles
Well-known member
Think it’s just ultra wide angle distortion from camera lens
V8Druid
do it as well as you can,but learn to do it better
think it's a bit more than that Giles ... top of the seat must be half way back along the rear side windows
want arms like an Orang to reach the wheel from that position
6
6feetdown
Well-known member
Need a bit of help please guys.
Our Avant this morning started dropping the forks when we had the pan mixer on, checked fluid and for leaks but all good.
Then when I went to make another mix forks held fine for the rest of the day.
I'm guessing a valve is sticking but anyone have any advice please?
Our Avant this morning started dropping the forks when we had the pan mixer on, checked fluid and for leaks but all good.
Then when I went to make another mix forks held fine for the rest of the day.
I'm guessing a valve is sticking but anyone have any advice please?
V8Druid
do it as well as you can,but learn to do it better
didn't like the frost?
JerryRtilt
Well-known member
Oil a bit thicker ?didn't like the frost?
6
6feetdown
Well-known member
Was kept insidedidn't like the frost?
V8Druid
do it as well as you can,but learn to do it better
JerryRtilt
Well-known member
Didn't like coming out in the cold? i didn't
6
6feetdown
Well-known member
Not a chancebut did you leave the heating on for it?
Footer block 1