K
Komatsu
Well-known member
Just been speaking to Shaun, the unit, in the picture can be got from Rototilt for about £450, which I think is very reasonably for what it is, think I’m right in saying that they’ll connect under pressure as well.
Last edited:
doobin
Well-known member
That's not as bad.
K
Komatsu
Well-known member
That’s what I thought, and I’m sure there’s always a deal to be done, he will hopefully be signing up to the forum over Christmas so sure he’ll be able to answer any questions that need answering.
M
Monkeybusiness
Well-known member
They one that Graham linked to has twice as many ports though (2x 1/2inch and 2x 3/4 inch). I’d imagine the cheaper unit is only 2x 1/2 inch possibly?
V8Druid
do it as well as you can,but learn to do it better
that's true MB .... here's the ones Ollie put up Multi-X ... https://www.cejn.com/products/hydraulics/multi-x-range/multi-x-duo-12-5/ they are very nice units ... but'd want to be for their cost .... can also get electrical couplings in 'em too IIRC and up to 6 way hydraulics
V8Druid
do it as well as you can,but learn to do it better
Multikupplung
K
Komatsu
Well-known member
I think for the price Gra, that there good value for money?, £450 is cheap enough for something like that and something that you would keep with the tilty for a long time.
T whiting
Well-known member
What would you do for other attachments if you had one of these setups? T flat faces into the lines before the fancy block?
V8Druid
do it as well as you can,but learn to do it better
V8Druid
do it as well as you can,but learn to do it better
could've sworn i posted a reply to this Oll ???
....I agree .. they are reasonable VFM .... but you'd wanna keep it with the tilty when it got swapped, for sure
T whiting
Well-known member
Yes I seem to have enough issues with ½¾ and inch connectors mounted one way or the other at the moment without introducing quick change blocks it's a neat idea though
JD450A
Feral as Fk 🐾
Yes Ollie spot on. IMHO a good cheaper alternative to the likes of EC Oil, Oilquick etc. Also keeps the s**t out of the connectors as there out of the way on the boom.
450A has been shunting loads out. Can knock a 8 legger out in 4 buckets
And it's paid for, f**k the finance the 50 year old machine works.
Crusher is nearing testing phases.
Benford dumper still has issues after the head gasket being done So out it comes
450A has been shunting loads out. Can knock a 8 legger out in 4 buckets
And it's paid for, f**k the finance the 50 year old machine works.Crusher is nearing testing phases.
Benford dumper still has issues after the head gasket being done
So out it comes Attachments
V8Druid
do it as well as you can,but learn to do it better
looks a LOT drier with you than it is here Rory .... you'd be dragging that truck in and out here
JD450A
Feral as Fk 🐾
That was Tuesday..... And done on a tip we have setup.... Lorries are sat on muck that was put down last summer with roller and compacted to f**k!
Muck that has come in is good but a little damp. Not going again before mid January so hopefully will get a good bit of weather, smack it back down and then go again!
V8Druid
do it as well as you can,but learn to do it better
J
Jimoz
Well-known member
Must be well compacted that they're sinking over the path on access to my job atm. Not sure who's problem it is. Mine, hauliers or council. When I've created accesses I've had to do them to council spec and no problem with 8 leggers over. This one was already done when I got here
Shovelhands
Well-known member
You’d not want to walk off the hard around here at the moment, let alone take a truck! Everywhere is a bog 
Delbouy
Active member
I don’t think the world is ready for 2 Rory’s yet!.He’s cloned himself, there now two Rory’s! .....
JD450A
Feral as Fk 🐾
Footer block 1