JD450A
Feral as Fk 🐾
Rear steer?
D
DaveDCB
Well-known member
Do you oxy it up back in the yard?
Mogman
What man as done, man can do, what never has,maybe
No got a big shear that will cut a lorry drive axle in two even with the half shaft in
Mogman
What man as done, man can do, what never has,maybe
Made this the other day
A superlift attachment
the pipe at the top and the box in the bottom are full of lead and the sides are 20 mm plate weighs nearly 300kgs, held on by hooking onto the pegs welded to the chassis now my 2.5 tonne telehandler will lift 3 tonnes without the lock out messing things about 
(only to be used by a competent person)
A superlift attachment
the pipe at the top and the box in the bottom are full of lead and the sides are 20 mm plate weighs nearly 300kgs, held on by hooking onto the pegs welded to the chassis now my 2.5 tonne telehandler will lift 3 tonnes without the lock out messing things about (only to be used by a competent person)
Quattromike
Well member-known
When I first seen it I thought you had made an attachment to pick up one telehandler with another telehandlerMade this the other day
View attachment 42153
A superlift attachment
that be some machine.
V8Druid
do it as well as you can,but learn to do it better
and what do you intend to hang off the top pipe Mog??Made this the other day
View attachment 42153
A superlift attachment
... it's a pipe for a reason 
diggerjones
Well-known member
Who's your driver paul ?Made this the other day
View attachment 42153
A superlift attachment
Mogman
What man as done, man can do, what never has,maybe
It’s a pipe because it’s what I had with a thick wall so when I poured the lead in it kept it’s shapeand what do you intend to hang off the top pipe Mog??
going to weld a bar a bit lower down to hang my chains off but need to keep the middle part open because there is a door that covers the fuel tank
S
Smiffy
Well-known member
It’s a pipe because it’s what I had with a thick wall so when I poured the lead in it kept it’s shape
going to weld a bar a bit lower down to hang my chains off but need to keep the middle part open because there is a door that covers the fuel tank
And we where all thinking it's masterfully designed to blend in to the machine and stop passing health and safety from suspecting a thing.
D
DaveDCB
Well-known member
Was going to say it looks like an original add on part!
Ps @Mogman that was me flashing today.. realised afterward how bright them headlights are
Bri963
Well-known member
Tidy work.It’s a pipe because it’s what I had with a thick wall so when I poured the lead in it kept it’s shape
going to weld a bar a bit lower down to hang my chains off but need to keep the middle part open because there is a door that covers the fuel tank
Mogman
What man as done, man can do, what never has,maybe
Yeah saw your number plate at the last moment or I would of shown you how bright my main beam isWas going to say it looks like an original add on part!
Ps @Mogman that was me flashing today.. realised afterward how bright them headlights are
V8Druid
do it as well as you can,but learn to do it better
Kin bright ... I've seen 'emYeah saw your number plate at the last moment or I would of shown you how bright my main beam is
Mogman
What man as done, man can do, what never has,maybe
Todays shenanigans keep warm in my shed building an extension arm for my 18 tonner
cut this off the back end of the dredging boat I had a few years back
weld on a plate to except the head I found in the back of the yard
and then stick a ram on that came from JCB in the scrap (used the original for another project years ago)
so tomorrow pipe up the ram, sort a biggish bucket and then pipe the machine up
cut this off the back end of the dredging boat I had a few years back
weld on a plate to except the head I found in the back of the yard
and then stick a ram on that came from JCB in the scrap (used the original for another project years ago)
so tomorrow pipe up the ram, sort a biggish bucket and then pipe the machine up
diggerjones
Well-known member
Is it depth or reach your after or both
Mogman
What man as done, man can do, what never has,maybe
More reach, got a wide ditch to clear (4 meters wide but down 3 meters from where the machine can sit) plus it’s about 2-3 meters deepIs it depth or reach your after or both
GazCro
Well-known member
What you fishing for?More reach, got a wide ditch to clear (4 meters wide but down 3 meters from where the machine can sit) plus it’s about 2-3 meters deep
V8Druid
do it as well as you can,but learn to do it better
tishWhat you fishing for?
Mogman
What man as done, man can do, what never has,maybe
V8Druid
do it as well as you can,but learn to do it better
what circuit you going to use it on Mog ... the VA ? .. assume it's going on the duck?Finished it today with one of my buckets that a built over 25 years ago (I remember the job it was made for) and ordered the change over valves for the machine too
will give me 3m of extra reach
Footer block 1