Kubota kx 61-3. Buckets

[CPS]

How much for a 750mm digging bucket for mine Aiden

£550 with teeth

 

[CPS]

No sign yet Aiden

It left early in the week, not sure what day but they did say 3 to 5 days to your address

 

[Thomas7740]

Any use @diggerjones

 

[Monkeybusiness]

This is my grading bucket for the E27 - it’s 1100mm across the cutting edge and the digger handles it fine. I ordered a 900 but they didn’t have them in stock when this was sent out - it was delivered with the option of swapping it for the 900 if I didn’t like it. Suffice to say it stayed here!
Come and have a scratch around with a few buckets if you’re passing fossil, there’s plenty of soil piles here you can tidy up!!!

 

[diggerjones]

£550 with teeth

Thanks

 

[sjs5060]

Any use @diggerjones View attachment 24278

Do not under any circumstances buy that, bought one for mine utter shite, the geometry was that bad we took the gas axe and welder too it after 3 days

 

[T whiting]

memory failure James ..
View attachment 24276
could've sworn it was 6 degs to neutralize the pitch of the hitch under the tiltys and set the bottom level, side on, with the tilty vertical, L/R orientation ... sure i'd read it somewhere, but can't find it this morning? ..... Frank? @Bucket on wheels

Isn't the 5° for pallet forks and grading beams so they go round flat without having to tilt them?

 

[V8Druid]

Isn't the 5° for pallet forks and grading beams so they go round flat without having to tilt them?

think you have it there Thomas .... memory is not what it was .... neutralizing the 6 deg angle the hitch sits at under a tilty .... that would fit nicely

 

[Shovelhands]

think you have it there Thomas .... memory is not what it was .... neutralizing the 6 deg angle the hitch sits at under a tilty .... that would fit nicely

Do they all sit at a 6 degree angle then? Is that an S type standard?
Mine is dead square with the rotator, which is handy. But obviously not S type.

 

[V8Druid]

Do they all sit at a 6 degree angle then? Is that an S type standard?
Mine is dead square with the rotator, which is handy. But obviously not S type.

STBC James, but I believe they do ... Aiden @CPS ???

 

[CPS]

STBC James, but I believe they do ... Aiden @CPS ???

Think it's 5 degrees on Rototilt, pretty sure the others are also.
The pin grabber option on Rototilt is level aswel

 

[diggerjones]

Facebook

www.facebook.com

Is this any good/ worth buying

 

[hiluxman]

Facebook

www.facebook.com

Is this any good/ worth buying

It's better than no hitch I suppose.

My old whites hitch is alot better than the 2 newer ones I've got. If I'd only got the newer ones I'd say avoid like the plague.

 

[diggerjones]

Ok thanks for that. Will look into it