Laser Levels Online Store

[Laser Levels Online]

We appreciate this is a very tricky time for all businesses and so we have set up the coupon code which will give you a further 5% discount on all products purchased.

However, if you have any questions or need any advice on which to buy please do not hesitate to contact us.

Best regards

Mark Roberts
Laser Levels Online
www.laser-level.co.uk

 

[Antony Holmes]

We appreciate this is a very tricky time for all businesses and so we have set up the coupon code planttalk which will give you a further 5% discount on all products purchased.

However, if you have any questions or need any advice on which to buy please do not hesitate to contact us.

Best regards

Mark Roberts
Laser Levels Online
www.laser-level.co.uk

I am looking for a laser level it looks like the ll300n is the one with the remote and cr700 receiver is the 5% discount still on and if so how do I get the code

 

[Laser Levels Online]

I am looking for a laser level it looks like the ll300n is the one with the remote and cr700 receiver is the 5% discount still on and if so how do I get the code

Hi Antony,

Thank you for your message.

Yes, simply use the enter planttalk in the coupon code box of the checkout to get the 5% discount.

Remember to also add the RC601 remote control to the basket if you need to do gradients or slopes (dual grade) as you cannot do it without it. However, it can be something that is purchased at a future point as it is not paired to the laser.

Hope this helps.

Best regards

Mark Roberts
Laser Levels Online

 

[Davyk]

Hi Mark, I’m looking for a laser for indoor electrical work if it has the ability to leave two 360 lines 90 degree apart e.g finding the center of a room ceiling.
Also be used for occasional outdoor use max 20m distance for foundation levels.
Do you have anything suitable

 

[Laser Levels Online]

Hi Mark, I’m looking for a laser for indoor electrical work if it has the ability to leave two 360 lines 90 degree apart e.g finding the center of a room ceiling.
Also be used for occasional outdoor use max 20m distance for foundation levels.
Do you have anything suitable

Hi,

Yes, a couple of options for you...

Please look at beam diagrams 7 and 8:

https://www.laser-level.co.uk/beam-diagrams.html

The links below each picture link to products which produce that beam diagram.

So the models you need to look at will be Fukuda FLE-444R, Spectra LT56, Fukuda FLE-444G, Spectra LT58G.

The two Fukuda lasers have a detector as standard and so can work outside out of the box.

The Spectra LT56 has the option to add a detector to the order but is not included as standard.

The LT58G currently has no option to work outside but a detector is launching late August which it will work with.

Top tip: If you plan to work outside, long range or in bright conditions, you will always need to use a laser detector with your laser level.
This applies to all makes and models and for both red & green lasers.

Hope this helps.

Best regards

Mark Roberts
Laser Levels Online

 

[Davyk]

Thank you, looks the Spectra LT58G should work so. Can it be recalibrated if required outside the warranty period. I understand the dewalt equivalent can’t be recalibrated while the hilti version can be but obviously it’s very pricy.

 

[Laser Levels Online]

Hi,

Thank you, looks the Spectra LT58G should work so. Can it be recalibrated if required outside the warranty period. I understand the dewalt equivalent can’t be recalibrated while the hilti version can be but obviously it’s very pricy.

Unlike the Spectra rotary versions, the guidance from Spectra on the LT56 & LT58G is that outside of the warranty period it cannot be calibrated.
If it goes out of calibration during its 3-year warranty and it is not as a result of an impact, negligence, misuse etc then it is replaced for free.

The Fukuda FLE-444G (which uses stepper motors, not a pendulum system) can, however, be calibrated both mechanically and electronically either during or outside of warranty. Although obviously within certain parameters.

Best regards

Mark Roberts
Laser Levels Online

 

[Antony Holmes]

Hi Antony,

Thank you for your message.

Yes, simply use the enter planttalk in the coupon code box of the checkout to get the 5% discount.

Remember to also add the RC601 remote control to the basket if you need to do gradients or slopes (dual grade) as you cannot do it without it. However, it can be something that is purchased at a future point as it is not paired to the laser.

Hope this helps.

Best regards

Mark Roberts
Laser Levels Online

Hi Mark
I placed the order for my laser this morning full kit with remote and cr600 I could not see the bit for the code at the check out (operator error probably) so no discount not that was a problem as price seems pretty good any way and I need the laser for next week, if you felt like sticking something extra in the box a man cannot have enough tapes ha ha
I am looking forward to it saving me some time with the cr600
thanks for making the purchase so easy your web site seems to work so well
thanks again
Tony

 

[Laser Levels Online]

Hi Mark
I placed the order for my laser this morning full kit with remote and cr600 I could not see the bit for the code at the check out (operator error probably) so no discount not that was a problem as price seems pretty good any way and I need the laser for next week, if you felt like sticking something extra in the box a man cannot have enough tapes ha ha
I am looking forward to it saving me some time with the cr600
thanks for making the purchase so easy your web site seems to work so well
thanks again
Tony

Hi Tony,
I have just checked through the orders and saw one was from you. My staff in the office have a standing instruction to apply the discount retrospectively and refund the difference if a forum member doesn’t put the code in. So don’t worry.
In your first message you mentioned purchasing the CR700 but in your order and your last message you have got the CR600.
It is not a problem for us as both are in stock- just want to make sure we supply what you want. If you could just let me know.....

Thanks again
Mark Roberts
Laser Levels Online

 

[Antony Holmes]

Hi Tony,
I have just checked through the orders and saw one was from you. My staff in the office have a standing instruction to apply the discount retrospectively and refund the difference if a forum member doesn’t put the code in. So don’t worry.
In your first message you mentioned purchasing the CR700 but in your order and your last message you have got the CR600.
It is not a problem for us as both are in stock- just want to make sure we supply what you want. If you could just let me know.....

Thanks again
Mark Roberts
Laser Levels Online

hi yes I have gone for the cr600 £120.00 of a difference and I could not see much more benefit but if you wanted to give me a call and sell the extra may be my mobile is 07866492651

 

[Laser Levels Online]

hi yes I have gone for the cr600 £120.00 of a difference and I could not see much more benefit but if you wanted to give me a call and sell the extra may be my mobile is.

Hi Tony,
Don’t worry, I have just looked at your order again. Shouldn’t just skim read.
The package you have actually bought is the best of both worlds as you will have two detectors available for use. The HL450 with mm/inch on the staff and the CR600 on the plant.
That is actually more versatile than just one CR700 (however good it is).
So not to worry, we will get that checked and calibrated today and dispatched by DPD tonight.

Thanks again
Mark Roberts
Laser Levels Online

 

[Antony Holmes]

Hi Tony,
Don’t worry, I have just looked at your order again. Shouldn’t just skim read.
The package you have actually bought is the best of both worlds as you will have two detectors available for use. The HL450 with mm/inch on the staff and the CR600 on the plant.
That is actually more versatile than just one CR700 (however good it is).
So not to worry, we will get that checked and calibrated today and dispatched by DPD tonight.

Thanks again
Mark Roberts
Laser Levels Online

Thanks for your help
Tony Holmes

 

[JD450A]

Going to have to get a New laser in the next couple weeks.

Can you get me a replacement Mag Mount for the CR600?

 

[Laser Levels Online]

Going to have to get a New laser in the next couple weeks.

Can you get me a replacement Mag Mount for the CR600?

Hi,
Yes, you can order the mag mount here:

Spectra CR600 Magnetic Mount

Spectra CR600 Magnetic Mount A very strong, magnetic mount designed for use with the Spectra Precision CR600 Detector. It is also compatible with model HR500. Compatibility Please check compatibility below: Warning: You need to know the exact make and model of the Laser Detector / Receiver...

www.laser-level.co.uk

Best regards
Mark Roberts
Laser Levels Online

 

[JD450A]

Order Arrived today, very impressed by the service and turnaround time.

 

[Laser Levels Online]

Order Arrived today, very impressed by the service and turnaround time.

No worries and many thanks for your order! Let us know if we can be of any help in the future.

Best regards

Mark Roberts
Laser Levels Online
www.laser-level.co.uk

 

[Grifferr]

My CR600 has gone silent. It wont even beep when i turn it on. The sound settings do nothing. I have had it about 3 years.
Any body else had problems. Can they be repaired?

 

[Laser Levels Online]

My CR600 has gone silent. It wont even beep when i turn it on. The sound settings do nothing. I have had it about 3 years.
Any body else had problems. Can they be repaired?

Hi,

It is unusual for the sounder to fail on the CR600. They are usually rock solid. They come with a 3 year warranty.

So, if you are a customer or ours and the CR600 carries our “supplies by laser levels online” sticker please DM me you details and I will be able to advise the best course of action.

If the CR600 was not supplied by us you would need to contact the supplying dealer.

Best regards

Mark Roberts
Laser Levels Online

 

[fred]

My CR600 has gone silent. It wont even beep when i turn it on. The sound settings do nothing. I have had it about 3 years.
Any body else had problems. Can they be repaired?

if it is shagged have a look at the Leica rod eye 160. It's a standard receiver but also tells you how many mm you are above/below grade.

 

[Laser Levels Online]

if it is shagged have a look at the Leica rod eye 160. It's a standard receiver but also tells you how many mm you are above/below grade.

Unless the kit was bought second hand it would be unusual for a customer to have a CR600 and only have it in the staff mounting configuration. They would usually also be using it mounted on plant which the Leica rod eye 160 would not be suitable for.

If it does transpire that the CR600 cannot be repaired and needs replacing and you are looking for a detector that shows a mm / inch scale to see the elevation or drop display on the detector. e.g 10mm - 8mm - 5mm - 2mm - LEVEL, as well as being able to mount it on plant then the newer Spectra CR700 is the best option:

https://www.laser-level.co.uk/produ...pectra-precision-cr700-magnetic-detector.html

Obviously the mm / inch scale can only be seen/used when mounted on a staff - not from the cab unless you have an optional HL760 as a relay/repeater.

Hope this helps.

Best regards

Mark Roberts
Laser Levels Online
www.laser-level.co.uk