Ye old crusher buckets

[Old Operator]

Have studied all further, found lifting specs for Bobcat E10, Case CX 12 / Eurocomach 12ZT, both could manage the TMA bucket one way or another, E10 Just about on dipper end - so easily on boom with dipper swapped out. Case usefully supply lift data on boom front pin (dipper still in place) I cannot anywhere find any lifting/ load handling specs for the JCB 8010 - perhaps it is not meant to lift at all? It has aux 24 lpm @ 180 Bar so hyds ideal for the job. E10 & 8010 commonly available used - not so other two. TMA say C1 starts @ 1.1t - weight / radius more of an issue on smaller machines than aux requirements. Just out of interest the USA E10 has a change over from ISO to SAE - is this so on the European ones. That said even American big 360's on ISO - so over here with the decline of TBL's I guess everything will be ISO levers
Agree with Monkeybusiness that can take my time to drop on something suitable used, so all options open. Tigerbite even if price right

 

[Fms1]

This looks a fairly decent buy if you have some work for it imo.
All of the mini/micro/chinese/small mobile tracked etc etc crushers seem massively pointless to me - their throughput is so minuscule that there is no way of justifying the labour to feed them when compared to buying in.
A mate crushed some tarmac for me with a bucket-crusher on an 8 tonne digger and it was wank - took all day and produced bugger all. I guessed it was going to be an hour’s work looking at the pile.

What bucket was it?
My Xcentric does 30-40 tonne an hour at 0-55mm
will do 10-15tonne (10ph pure conc/15ph mixed h/c)ph 0-10mm
all on an 8 tonner, it blew away the mb equivalent by 2 or 3 time output ph.
shame I can’t upload the videos as I didn’t believe it was possible at first.

 

[Monkeybusiness]

What bucket was it?
My Xcentric does 30-40 tonne an hour at 0-55mm
will do 10-15tonne (10ph pure conc/15ph mixed h/c)ph 0-10mm
all on an 8 tonner, it blew away the mb equivalent by 2 or 3 time output ph.
shame I can’t upload the videos as I didn’t believe it was possible at first.

Not sure, hawkfork or something possibly?

 

[Fms1]

Not sure, hawkfork or something possibly?

The Xcentric blows the others away! To the point my new xc8 arrived in the uk today, the old 2nd hand one paid its way in a year and got £2kmore back from the dealer than I paid for it against a new one!
that’s the old one off to Israel.
not sure if this instagram link will work

Stuart on Instagram: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushe

8 likes, 0 comments - daborns_groundwork on September 22, 2024: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushed...

www.instagram.com

 

[V8Druid]

The Xcentric blows the others away! To the point my new xc8 arrived in the uk today, the old 2nd hand one paid its way in a year and got £2kmore back from the dealer than I paid for it against a new one!
that’s the old one off to Israel.
not sure if this instagram link will work

Stuart on Instagram: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushe

8 likes, 0 comments - daborns_groundwork on September 22, 2024: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushed...

www.instagram.com

that is some crusher bucket

 

[6feetdown]

The Xcentric blows the others away! To the point my new xc8 arrived in the uk today, the old 2nd hand one paid its way in a year and got £2kmore back from the dealer than I paid for it against a new one!
that’s the old one off to Israel.
not sure if this instagram link will work

Stuart on Instagram: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushe

8 likes, 0 comments - daborns_groundwork on September 22, 2024: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushed...

www.instagram.com

That's smashing through it

 

[TiltyShaun]

The Xcentric blows the others away! To the point my new xc8 arrived in the uk today, the old 2nd hand one paid its way in a year and got £2kmore back from the dealer than I paid for it against a new one!
that’s the old one off to Israel.
not sure if this instagram link will work

Stuart on Instagram: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushe

8 likes, 0 comments - daborns_groundwork on September 22, 2024: "Our onsite crushing minimising waste leaving site, benefiting the environment and the customer with cost savings. Our crushers run on our 8-21 tonne machines. Here on our Wentworth site this ruff scraped up hardcore being crushed...

www.instagram.com

What sort of £££ is the new one?

 

[Fms1]

What sort of £££ is the new one?

Just over £30k I think, the mb is £22k last quote I heard of.

 

[TiltyShaun]

Just over £30k I think, the mb is £22k last quote I heard of.

Wow

 

[kato512]

One of them Chinese crushers in euro auctions tomorrow in Dromore NI.

https://www.euroauctions.com/en/equipment-search/product?itemid=100334403&t=0

 

[kato512]

One of them Chinese crushers in euro auctions tomorrow in Dromore NI.

https://www.euroauctions.com/en/equipment-search/product?itemid=100334403&t=0

 

[6feetdown]

Did you buy?

 

[kato512]

Did you buy?

Nah a scissor lift, a lorry body and then a tractor for a mate.