Mogmans creations 🤔

[V8Druid]

What a pile of crap I’d be embarrassed to take it as scrap on my trailer would have to go in a curtainsider to save face
So onto today’s disaster dropped a piece angle iron out of the vice which caught the handle of my mug and took it clean off which then dropped on the floor and shattered
So had to improvise
thought I’d show an interior shot quite tidy inside shame it’s going to get covered in broken glass soon

can you not cover the inside of the glass with some wide masking tape all over @Mogman .... put a cover/sheet/tarp/piece of ply over the outside and push it out gently from inside ..... hopefully most of it'll end up on the cover outside

no exhaust clamps to hand Boyo ?


well done on getting as far as you have in such a short space of time ... a LOT of work and thought gone into that mod. .... you are so lucky to have such an extensive 'parts bin' though

 

[rossandson]

What a pile of crap I’d be embarrassed to take it as scrap on my trailer would have to go in a curtainsider to save face

It was a joke don’t worry. I think even the scrap man might be embarrassed to take it away.

 

[Stubota86]

can you not cover the inside of the glass with some wide masking tape all over @Mogman .... put a cover/sheet/tarp/piece of ply over the outside and push it out gently from inside ..... hopefully most of it'll end up on the cover outside

carpet protector inside and out works well too

Carpet Protection Film 600mm x 20m | Toolstation

Excellent protection for carpets during refurbishment and decoration. Self adhesive. Can be left for up to 4 weeks, leaving no sticky residue. For use on synthetic carpets only

www.toolstation.com

 

[V8Druid]

is that an old Bristol in the background @Mogman

 

[Shovelhands]

I can’t wait to see what breed of thing is going to be the donor for the glass.....

 

[Mogman]

can you not cover the inside of the glass with some wide masking tape all over @Mogman .... put a cover/sheet/tarp/piece of ply over the outside and push it out gently from inside ..... hopefully most of it'll end up on the cover outside

no exhaust clamps to hand Boyo ?
View attachment 22564 View attachment 22565

well done on getting as far as you have in such a short space of time ... a LOT of work and thought gone into that mod. .... you are so lucky to have such an extensive 'parts bin' though

Yes been quite an involved job (wish I’d stuck this one in in the first place) but getting there
yes having the ‘run‘ of the yard does help, I have a saying “it’ll come in” (the yard) plus you have to have the ‘vision’ to see something that might not be what you want but can soon be adapted (easier to adapt than build)
got to go to work tomorrow so can’t play out

cheers for the compliment as for the mug might just look for a exhaust clamp as it hurts my finger at the moment

 

[Mogman]

is that an old Bristol in the background @Mogman
View attachment 22566

2 cylinder petter (I think) stuck to a 2-300 amp dc welder used to be a cracking welder but been left out for too long now
now I have this thing

MAGIC WELD 150

MAGIC WELD 150

www.mosa.it

can throw it in the back of the van and melt 3.25 rods for fun

 

[Monkeybusiness]

I can’t wait to see what breed of thing is going to be the donor for the glass.....

I’ve got an older plasma screen that might just fit in the hole - you don’t need to see behind you surely?!

 

[Mogman]

I’ve got an older plasma screen that might just fit in the hole - you don’t need to see behind you surely?!

If I stuck that in the hole I could have a rear facing camera wired to it job done

 

[GazCro]

If I stuck that in the hole I could have a rear facing camera wired to it job done

Netflix = value doubled

 

[V8Druid]

If I stuck that in the hole I could have a rear facing camera wired to it job done

still gonna have to turn round to see the damned thing though

 

[V8Druid]

2 cylinder petter (I think) stuck to a 2-300 amp dc welder used to be a cracking welder but been left out for too long now
now I have this thing

MAGIC WELD 150

MAGIC WELD 150

www.mosa.it

can throw it in the back of the van and melt 3.25 rods for fun

please DO NOT tell me you hoiked that out the scrap too .
great little things those ..... used to have its big bro. ..... ran a Hefty pretty well too

the beast in the background looked for all the world like a Bristol 4 wheeled compressor .. or had the welder been transplanted into the chassis

 

[Mogman]

please DO NOT tell me you hoiked that out the scrap too .
great little things those ..... used to have its big bro. ..... ran a Hefty pretty well too


View attachment 22569View attachment 22567
View attachment 22568
the beast in the background looked for all the world like a Bristol 4 wheeled compressor .. or had the welder been transplanted into the chassis

No sadly had to give £200 for it was on eBay nobody seemed to want it but a cracking welder

 

[Mogman]

Well had a right head scratching time today as you know the machine is only 12v and need to keep it that way because it has a few solenoids for the dead man and something else (not sure what it does yet)
but with a few relays and a plate of spaghetti later

needs tidying up but starts and stops on the key ignition, oil and temperature lights on the dash all working even got the heater plugs on line too

oh and sold the trailer today so I’m in profit with the digger trailer combo

I can see light at the end of the tunnel now will hopefully stick the arse weights on tomorrow and find something suitable for the broken window as so far not spent anything on it and don’t want to either

 

[V8Druid]

No sadly had to give £200 for it was on eBay nobody seemed to want it but a cracking welder

200 *****ing quid .... wish i'd seen that too ...... they are a superb little set, by all accounts

 

[GazCro]

Well had a right head scratching time today as you know the machine is only 12v and need to keep it that way because it has a few solenoids for the dead man and something else (not sure what it does yet)
but with a few relays and a plate of spaghetti laterView attachment 22628
needs tidying up but starts and stops on the key ignition, oil and temperature lights on the dash all working even got the heater plugs on line too

oh and sold the trailer today so I’m in profit with the digger trailer combo

I can see light at the end of the tunnel now will hopefully stick the arse weights on tomorrow and find something suitable for the broken window as so far not spent anything on it and don’t want to either

Be honest you're gonna fold that bird nest up stuff it in the box put lid on and forget about it

 

[V8Druid]

MAGIC WELD 150

MAGIC WELD 150

www.mosa.it

can throw it in the back of the van and melt 3.25 rods for fun

No sadly had to give £200 for it was on eBay nobody seemed to want it but a cracking welder

by a strange coincidence if anyone fancies one for an equally decent VFM price of 400 quid (7) Marketplace – Mosa magic weld mkII 150 | Facebook

NEW MAGIC WELD (mosa.it)

 

[Giles]

No sadly had to give £200 for it was on eBay nobody seemed to want it but a cracking welder

They’re like 1200-2000 on eBay how do you do it!!! Haha

 

[Giles]

by a strange coincidence if anyone fancies one for an equally decent VFM price of 400 quid (7) Marketplace – Mosa magic weld mkII 150 | Facebook

NEW MAGIC WELD (mosa.it)

That says it isn’t welding FYI generator works but welder isn’t

 

[Mogman]

by a strange coincidence if anyone fancies one for an equally decent VFM price of 400 quid (7) Marketplace – Mosa magic weld mkII 150 | Facebook

NEW MAGIC WELD (mosa.it)

£400 for an engine seems steep to me