diggerjones
Well-known member
Its very bartered
Could it be a safe load indicator? Might be a switch somewhere.
Bang on gents. I don’t need to take the hammer to the beeper now!,Is there a lifting setting or button in the cab
Hitachi's have a picture of a hook on a button for when used for lifting
Caught me out on the 3CX a couple of times, new machine, buzzer going off. Phoned the fitter, he said have you cleaned the dash? I had and because the switch is on it’s own it’s not clear which way is on or off.Bang on gents. I don’t need to take the hammer to the beeper now!,
so are we gonna see any "Rainbow Dash " decals on it anytime soon then ShaunWhat happens when a 6 year old names you digger.....
Welcome to the fleet Rainbow Dash!!
What happens when a 6 year old names you digger.....
Welcome to the fleet Rainbow Dash!!
@Regy53 ... where's the button in the like bar Boyo ..... pretty please -- againThe decals haven’t made it out to site today so hopefully weather permitting they will be going on tomorrow.
Photos to follow!!
Well pics will follow when I get time to slap the decals on!!! Been very busy preparing site for the pilling rig due next week. Braking news is I am going idig before Tilty!
Early impression of machine is good. Loading lorries with the 3ft bucket and it is well balanced. With grading bucket on it is finding the heavy clay hard going. So quick switch to the smaller bucket to rough it down then just trim with the grader. Most annoy thing is not much gap between the blade and cab. Been caught out a few times with spoil over the blade catching as you slew. Trouble is operator rather than machine I guess! Seems to be reasonable on fuel with the different modes making a difference when you need the extra power. Getting used to lifting the tracks again to turn as again, in the sticky stuff!!
Same , joining idig gang in jan.Idig looks like a proper timesaver for when your on your own a lot or even with 2 of you your man can stay on dumper or he can get on with something else instead of being stuck on the staff - I'm going to look at putting one across the 8t and 3t when we get going proper again in spring.
waiting for the 'January sales' ehSame , joining idig gang in jan.
@nhew I think you have posted this on the wrong thread!To be honest anything mechanical can fail new or not but its how the failure is dealt with that matters and in 12 month they have had it nearly a 1/3 of it 16.5 week in total with very little contact yes they have loaned me a machine but it took them nearly 6 weeks to find one and this is a massive dealer with numerous depots dealing in lots of machines at first the fitter would ring and ask for the characteristics of the machine and he would ring me telling me what he had tested etc then i got a phone call from the salesman saying i had to make no more contact with the fitter and to go through the service manager, the same service manager that said "what was the other fault you were winging about " then to be told by both him and the salesman that i should be grateful as they wernt charging for the loan machine ! Well i wasnt mad until then. Then the salesman is saying the machine is ready to come back all tested and on form but i get an email saying its not complete as they are waiting for a pipe post easter holidays so someone is talking crap all in all im done with lloyds carlisle there customer service is astonishing and kobelco isnt much better .
I did wonder ! Made me read back through it . What happened to rainbow dash decals on the digger ?????@nhew I think you have posted this on the wrong thread!
They are still there!!I did wonder ! Made me read back through it . What happened to rainbow dash decals on the digger ?????
I also like to give them all a handle !