L
M
Monkeybusiness
Well-known member
Sounds like Uncle Jessie has a dose of Corona!
V8Druid
do it as well as you can,but learn to do it better
someone get the tin opener ......
J
Jimoz
Well-known member
Wouldn't it be great Attenborough commentating to that...the 360 attacks it's prey which struggles and withers on the ground. Circle of life
Mogman
What man as done, man can do, what never has,maybe
That’s going to take a bit of welding up when they’ve finished
Richard Hunton
Well-known member
Snap,
This was up ere last year, caused holly hell was 8am, they took a 3cx to it, tore it off the wagon and opened her up.
Apparently there only 2or 3mm steel
Attachments
V8Druid
do it as well as you can,but learn to do it better
usually 3mm .. 2 mil 'd wear out too quickSnap,
This was up ere last year, caused holly hell was 8am, they took a 3cx to it, tore it off the wagon and opened her up.
Apparently there only 2or 3mm steel
Shovelhands
Well-known member
What am I missing?
concrete = no good to anyone after that
drum = no good to anyone after that
so why do that?
concrete = no good to anyone after that
drum = no good to anyone after that
so why do that?
V8Druid
do it as well as you can,but learn to do it better
'cos the likes of EMR are not gonna take a drum full of compo ... an' it's a hell of a lump when set ......... plus a lot easier to deal with the chassis cab once emptied
M
mart1602
Well-known member
brother in law wotked for readymix ,spent a couple of days with a breaker inside the drum cutting out conc when the bearing failed
Shovelhands
Well-known member
I get that, but if your destroying it, then take the drum full away and knock it apart with a pecker imo, wouldn’t take long with a big 360, do it immediately and the concrete won’t put up much of a fight. Can’t see why you’d go to those lengths on the side of the road, not to mention the mess.
S
Smiffy
Well-known member
When dealing with the highways you have to do whatever is deemed quickest to open the carriage way especially if a main route
It would take a fair size crane to be brought in to lift that barrel loaded on to a low loader whereas the council have grab lorry's on 24hr a day call out so it's relatively simple to tidy up
They do have some bizarre ideas though
V8Druid
do it as well as you can,but learn to do it better
pulling the mixer back over full would take some doing, unless you had a large crane on site .... empty it's much less of a challenge ... see there's a set of lift chains around the drum in the vid ... obviously failed to upright it and are emptying it to upright it'd be my best guess
Lancs Lad
Well-known member
There's bad days...and RF bad days.
V8Druid
do it as well as you can,but learn to do it better
Antony Holmes
Well-known member
that's got to be a p45 day
GazCro
Well-known member
Ok so if it wasn't too high wouldn't be a problem obvs but why load that way round. Probably couldn't wrap arm up enough for step in trailer or truck cab.
Richard Hunton
Well-known member
I wish that was my doosan
pettsy
Well-known member
Not my machine....spotted online.
GazCro
Well-known member
Looks like a bit of play in kingpost there
Footer block 1