Druidic Dabblings and General Twaddle !!

V8Druid

V8Druid

do it as well as you can,but learn to do it better
one to make a few chuckle ....
Pam cleaning the kitchen units the other day and her usual kitchen cleaner just wasn't 'cutting it' so went off down her garden tool shed, where we have a box full of various cleaning products and came back with some sugar soap, which blitzed the job.
I'm looking at it after and realise it might just be of pensionable age :unsure::oops: ... amazed it's still so potent and working great ... read the bottom of the label :ROFLMAO::ROFLMAO:
WP_20240129_16_36_50_Pro.jpg
WP_20240129_16_37_12_Pro.jpg
 
Lancs Lad

Lancs Lad

Well-known member
one to make a few chuckle ....
Pam cleaning the kitchen units the other day and her usual kitchen cleaner just wasn't 'cutting it' so went off down her garden tool shed, where we have a box full of various cleaning products and came back with some sugar soap, which blitzed the job.
I'm looking at it after and realise it might just be of pensionable age :unsure::oops: ... amazed it's still so potent and working great ... read the bottom of the label :ROFLMAO::ROFLMAO:
View attachment 57189 View attachment 57191
Woolys! Remember their free sweet selection area well😊
 
6

6feetdown

Well-known member
one to make a few chuckle ....
Pam cleaning the kitchen units the other day and her usual kitchen cleaner just wasn't 'cutting it' so went off down her garden tool shed, where we have a box full of various cleaning products and came back with some sugar soap, which blitzed the job.
I'm looking at it after and realise it might just be of pensionable age :unsure::oops: ... amazed it's still so potent and working great ... read the bottom of the label :ROFLMAO::ROFLMAO:
View attachment 57189 View attachment 57191
Berlin 2019
 

Attachments

  • 20191127_220441.jpg
    20191127_220441.jpg
    75.1 KB · Views: 92
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Berlin 2019
yeh went down the tubes here in '09 as Woolco, but Woolworths continued in Germany (German owned) .. not sure if they still do though :unsure::unsure: ...... just looked and over 630 stores in Germany, Austria and Poland
 
6

6feetdown

Well-known member
yeh went down the tubes here in '09 as Woolco, but Woolworths continued in Germany (German owned) .. not sure if they still do though :unsure::unsure: ...... just looked and over 630 stores in Germany, Austria and Poland
On about bringing some back here
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
anyone know anything about these ?? not dear and local-ish ...
not seen a Hyundai before - badge engineering???
Chap has supposedly sold it and getting collected today ..
will let me know if he doesn't turn up.
Pity I'd not seen it earlier
1706970706949.png

422193026_7012032048891852_3509880781124918427_n.jpg

422473240_7230774290324388_10395757362738859_n.jpg
 
William127

William127

Well-known member
anyone know anything about these ?? not dear and local-ish ...
not seen a Hyundai before - badge engineering???
Chap has supposedly sold it and getting collected today ..
will let me know if he doesn't turn up.
Pity I'd not seen it earlier
View attachment 57264
422193026_7012032048891852_3509880781124918427_n.jpg

422473240_7230774290324388_10395757362738859_n.jpg
As I've said before elsewhere I have some hyundai machines, good where it counts in things like engines and performance is fine, its the little things that show the cheapness- switches, cables, handbrake on the stump grinder, that sort of thing.
I'd imagine that would be a perfectly serviceable tool but I'm not particularly bowled over by the price. Don't think it's necessarily over priced just doesn't seem that cheap compared to a good used mucktruck.

Have you ever thought about a Sherpa/Opico type mini loader? I love using my Giant around the yard, so handy for moving awkward/medium weight stuff around with the convenience of forks or loose stuff in the bucket.
Bit expensive for a glorified wheelbarrow I suppose but Opicos come up for 5k every so often 👍
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
As I've said before elsewhere I have some hyundai machines, good where it counts in things like engines and performance is fine, its the little things that show the cheapness- switches, cables, handbrake on the stump grinder, that sort of thing.
I'd imagine that would be a perfectly serviceable tool but I'm not particularly bowled over by the price. Don't think it's necessarily over priced just doesn't seem that cheap compared to a good used mucktruck.

Have you ever thought about a Sherpa/Opico type mini loader? I love using my Giant around the yard, so handy for moving awkward/medium weight stuff around with the convenience of forks or loose stuff in the bucket.
Bit expensive for a glorified wheelbarrow I suppose but Opicos come up for 5k every so often 👍
Have heard decent things about Hyundai kit before ..... don't like the mucktruck drive system and the vertical crank set up .. horizontal crank is a way easier proposition to replace if needed and twin axle chain driven each side has to be preferable

that's the issue with a skiddy loader ... can buy old bobcats for a lot less, but they all make a mess on anything soft ... I appreciate that that (and others similar) are also skidders, but way lighter and bigger carrying bin.
other option is a quad and trailer (which I ain't short on), but cheap quads're usually bollo-ed ... would be handier on a range of fronts though :rolleyes:
 
William127

William127

Well-known member
Have heard decent things about Hyundai kit before ..... don't like the mucktruck drive system and the vertical crank set up .. horizontal crank is a way easier proposition to replace if needed and twin axle chain driven each side has to be preferable

that's the issue with a skiddy loader ... can buy old bobcats for a lot less, but they all make a mess on anything soft ... I appreciate that that (and others similar) are also skidders, but way lighter and bigger carrying bin.
other option is a quad and trailer (which I ain't short on), but cheap quads're usually bollo-ed ... would be handier on a range of fronts though :rolleyes:
My much truck has been a nice steady machine that's never really given any trouble but now you say that I would prefer a nice GX engine layout in it.

Old bobcat types are great value but like you say, really have to be on the right ground.

Funny you should say that about a cheap quad- I picked up a 2014 300kvf kawasaki brute force 2wd on Monday, been on a private estate where my Dad does a lot of work, well looked after, used but not abused.
It went into the garden machinery place they use as a non runner, had the coil replaced and a battery, still no go. The next options are the stator and the cdi unit, but the owner decided to p/x it against a new one. So all I had to do was match their offer of 500 quid and its mine 👍 👍
Shouldn't cost me more than about 300 quid to sort and I'll have a really tidy little quad for not a lot of cash.
Oh and it'll be on brand new wheels and tyres as they run it on grass tyres so we'll be swapping! 👍
Not sure what I'll do with it, got a bit of work that it could be useful for or I may move it on.
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
My much truck has been a nice steady machine that's never really given any trouble but now you say that I would prefer a nice GX engine layout in it.

Old bobcat types are great value but like you say, really have to be on the right ground.

Funny you should say that about a cheap quad- I picked up a 2014 300kvf kawasaki brute force 2wd on Monday, been on a private estate where my Dad does a lot of work, well looked after, used but not abused.
It went into the garden machinery place they use as a non runner, had the coil replaced and a battery, still no go. The next options are the stator and the cdi unit, but the owner decided to p/x it against a new one. So all I had to do was match their offer of 500 quid and its mine 👍 👍
Shouldn't cost me more than about 300 quid to sort and I'll have a really tidy little quad for not a lot of cash.
Oh and it'll be on brand new wheels and tyres as they run it on grass tyres so we'll be swapping! 👍
Not sure what I'll do with it, got a bit of work that it could be useful for or I may move it on.
only 2WD though .... Ross had some very cheap 2WD quads new last year, but only 2WD :rolleyes: ... right handful to get off a slick surface if stuck :( and exciting, cross slope :oops::rolleyes: ... still very cheap for a kwaka -- might be worth a look at the kill switch and wiring ;):)
 
S

Smiffy

Well-known member
only 2WD though .... Ross had some very cheap 2WD quads new last year, but only 2WD :rolleyes: ... right handful to get off a slick surface if stuck :( and exciting, cross slope :oops::rolleyes: ... still very cheap for a kwaka -- might be worth a look at the kill switch and wiring ;):)

2wd are fine if they are light weight ones. 4wd only becomes important on big heavy machines or dragging other stuff around.
 
S

Smiffy

Well-known member
only 2WD though .... Ross had some very cheap 2WD quads new last year, but only 2WD :rolleyes: ... right handful to get off a slick surface if stuck :( and exciting, cross slope :oops::rolleyes: ... still very cheap for a kwaka -- might be worth a look at the kill switch and wiring ;):)

What about using a Suzuki jimny as a base for a project. Take the body off and make a tipper for it. I was on a shoot at Christmas and a Suzuki kap pickup on road tyres stalled in a very muddy gateway. I thought a tractor would be required to extract it. Trying to get going in that mud would certainly of beaten any pickup. But he just started it up again and floated out.
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
What about using a Suzuki jimny as a base for a project. Take the body off and make a tipper for it. I was on a shoot at Christmas and a Suzuki kap pickup on road tyres stalled in a very muddy gateway. I thought a tractor would be required to extract it. Trying to get going in that mud would certainly of beaten any pickup. But he just started it up again and floated out.
can't be many of them left about these days :rolleyes:

just had a look on ebay and they'm still making 'em :oops::oops: ..... didn't find a single one of the old flat panel ones that I had in my mind's eye though :unsure:
 
Top