Davyk
New member
I’m in the middle of building a new house and fortunately/unfortunately it involved constructing an 600m roadway which is now to be sheeted in 804 or similar following the majority of the construction traffic. The base layer is 3 inch down.
Going forward for maintenance I’m looking at getting a roller as hiring one works out at over €400 a time. I’ll give it run with the land leveller/box grader on a tractor followed by the roller. Topping up with stone as required.
I’ve settled on the idea of a 800mm roller as it takes up a lot less space than a 1.2m in the workshop when not in use.
Probably looking to buy in Euroauctions the likes of a JCB VMT160-80.
Any opinions on these they seem less complex than the newer Bomag/Hamm models.
Going forward for maintenance I’m looking at getting a roller as hiring one works out at over €400 a time. I’ll give it run with the land leveller/box grader on a tractor followed by the roller. Topping up with stone as required.
I’ve settled on the idea of a 800mm roller as it takes up a lot less space than a 1.2m in the workshop when not in use.
Probably looking to buy in Euroauctions the likes of a JCB VMT160-80.
Any opinions on these they seem less complex than the newer Bomag/Hamm models.