The 'Today's Job' thread

6

6feetdown

Well-known member
Managed to strip the shutters after a few hours too
 

Attachments

  • 20240817_175533.jpg
    20240817_175533.jpg
    387.6 KB · Views: 157
  • 20240817_161715.jpg
    20240817_161715.jpg
    382.9 KB · Views: 164
Storrsy

Storrsy

Well-known member
Been rock facing this riverbank over the past 10 days. Half the job (literally) was just getting access track put in and bringing the stone in as awkward access for about 600meter.
The bridge was about to get washed away- another year and I reckon it would have gone. Been quite a job for my poor old TB125.
 

Attachments

  • IMG20240505164116.jpg
    IMG20240505164116.jpg
    375.3 KB · Views: 133
  • IMG20240505170022.jpg
    IMG20240505170022.jpg
    306.5 KB · Views: 128
  • IMG20240808115308.jpg
    IMG20240808115308.jpg
    319.5 KB · Views: 133
  • IMG20240812150409.jpg
    IMG20240812150409.jpg
    325.2 KB · Views: 136
  • IMG20240816164925.jpg
    IMG20240816164925.jpg
    214.3 KB · Views: 139
  • IMG20240817132845.jpg
    IMG20240817132845.jpg
    321 KB · Views: 143
  • IMG20240817133043.jpg
    IMG20240817133043.jpg
    317.3 KB · Views: 146
  • IMG20240817133014.jpg
    IMG20240817133014.jpg
    285.6 KB · Views: 139
  • IMG20240817132901.jpg
    IMG20240817132901.jpg
    323.6 KB · Views: 141
  • IMG20240817133713.jpg
    IMG20240817133713.jpg
    322.9 KB · Views: 147
Lancs Lad

Lancs Lad

Well-known member
Been rock facing this riverbank over the past 10 days. Half the job (literally) was just getting access track put in and bringing the stone in as awkward access for about 600meter.
The bridge was about to get washed away- another year and I reckon it would have gone. Been quite a job for my poor old TB125.
Awesome job. Absolute work of art.
A time lapse of that would be mega 👌
 
S

Stroppymonkey

Well-known member
Thanks. The bit under the bridge is rougher than id have liked tbh but was max lift capacity of digger at full stretch and trying to post them in under neath the bridge without knocking the dodgy abutment was hard enough without worrying too much what it looked like!
I believe this is the same job you were chatting about many months ago? I seem to recall the concrete rings used as piers
 
Furniss

Furniss

Well-known member
Been rock facing this riverbank over the past 10 days. Half the job (literally) was just getting access track put in and bringing the stone in as awkward access for about 600meter.
The bridge was about to get washed away- another year and I reckon it would have gone. Been quite a job for my poor old TB125.
Chapeau :)
 
Storrsy

Storrsy

Well-known member
I believe this is the same job you were chatting about many months ago? I seem to recall the concrete rings used as piers
That's the one. Yeah severely undermined- could wiggle my arm right underneath the concrete slab. Not surprising as the slab was sitting on a bed of soft peaty s**t with a bit of gravel they'd chucked in before laying the slab. Apparently done by the Royal engineers as a training exercise back in the day.

In the end I dug out as much of the underneath to deepen as I dared- pushed a large slab like rock underneath with the digger to keep it propped up and then made a good stiff concrete mix so I could pack it in underneath. The boulders now protecting it are all dug down to bedrock and backed with concrete too so hopefully that should do it.
 
Lancs Lad

Lancs Lad

Well-known member
May need a bigger digger
Wowsers but no doubt very much needed.

I shudder to think of the waste and crap that will be spent on this.
National infrastructure like this should be prioritised and treated like a war project...no nimbys ...once the site and project decided crack on...sod pointless surveys it's gonna be flooded anyway
 
Top