M
K
keith
Member
if you have a patton i can make you one
M
mike G
New member
thank you for that option keith ,ill see what develops in a couple of days of searching.
V8Druid
do it as well as you can,but learn to do it better
assume it's related to Simon Snorkel ...
used to have a factory local, in Ebbwvale maaaaaaaaaaaaaaaany years ago, doing fire engine lifts
had 'industrial relation' problems (and their WDA rent/rates free incentive scheme/period had expired) .. Friday shift clocked off at 4pm ... came to clock on, on the Monday morning - place was empty ... they moved the whole operation, lock, stock and barrel to Scotland in 60 hrs ...... must've taken some organising .. was quite a big unit
what's wrong with the shaft you have ?
used to have a factory local, in Ebbwvale maaaaaaaaaaaaaaaany years ago, doing fire engine lifts
had 'industrial relation' problems (and their WDA rent/rates free incentive scheme/period had expired) .. Friday shift clocked off at 4pm ... came to clock on, on the Monday morning - place was empty ... they moved the whole operation, lock, stock and barrel to Scotland in 60 hrs ...... must've taken some organising .. was quite a big unit
what's wrong with the shaft you have ?
M
mike G
New member
V8Druid
do it as well as you can,but learn to do it better
almost certainly, but don't think they emanated from Ebbwvale works ... they were into truck mounted platformshi dont know if topper and snorkel are related could be cousins
that's an annoying place to snap
....if it'd been more central I'd've suggested some 299 Mo/Ni/Cr rods to re-assemble ...
shove it through any restrictive bearing dia.s and split sleeved it ....
's only slow moving after all ...
have done it before and worked fine ...
the 299s'll weld just about anything - and hold .....
that is a PITA .....
any idea who's axles they are ??
JD450A
Feral as Fk 🐾
A pic of the axles and hubs respectively would be helpful
V8Druid
do it as well as you can,but learn to do it better
6 stud and a fairly large PCD for the wheel size ... only 2WD too ..... interesting telehandler on solids in the background
.. waste transfer 'praps
M
mike G
New member
yes its a ford axle possibly same as old mk1-2 twinwheeler trannyalmost certainly, but don't think they emanated from Ebbwvale works ... they were into truck mounted platforms
that's an annoying place to snap
if it'd been more central I'd've suggested some 299 Mo/Ni/Cr rods to re-assemble ...
shove it through any restrictive bearing dia.s and split sleeved it ....
's only slow moving after all ...
have done it before and worked fine ...
the 299s'll weld just about anything - and hold .....
that is a PITA .....
any idea who's axles they are ??
Last edited:
V8Druid
do it as well as you can,but learn to do it better
slung 4 complete ones in the skip when I cleared my yard
... made nice axles with the diff.s cut out
JD450A
Feral as Fk 🐾
I might have something on a LDV convoy. Chuck up more piccys
Footer block 1