Lancs Lad
Well-known member
I think point of the website is that bridge has claimed over 180 trucks and countingIt only shredded the rear of the truck - with a decent load, he would have made it.
Gecko
Well-known member
Yeah sure, but that one came so close to making it.I think point of the website is that bridge has claimed over 180 trucks and counting
Another bridge with a similar repututation
How Many Days Since The Montague Street Bridge Has Been Hit?
It averages one every 45 days
V8Druid
do it as well as you can,but learn to do it better
may have mentioned this one before ....
friend used to run heavy haulage yard.
had one of his vehicles pull in the yard one evening (I happened to be there having a cuppa, en route home)
big tranny on a low loader .. driver was up on it checking all his chains, etc., came into Dicky's office and said " you'd better come and have a look at this boss "
Climbed up onto the load and in the well on top of this big tranny were a couple of dozen rivet heads - big ones, like 40mm dia. mushroom heads !! (and all over the bed too, on closer inspection)
Planned route for the load, so somewhere on the route was a gnat's nadger bridge with several dozen rivets, missing their heads.
Never followed it up - too much grief/effort/possible tish, even though it'd been a planned and agreed route and as far as I know sod all has ever fallen down ........
But!!
friend used to run heavy haulage yard.
had one of his vehicles pull in the yard one evening (I happened to be there having a cuppa, en route home)
big tranny on a low loader .. driver was up on it checking all his chains, etc., came into Dicky's office and said " you'd better come and have a look at this boss "
Climbed up onto the load and in the well on top of this big tranny were a couple of dozen rivet heads - big ones, like 40mm dia. mushroom heads !!
(and all over the bed too, on closer inspection) Planned route for the load, so somewhere on the route was a gnat's nadger bridge with several dozen rivets, missing their heads.
Never followed it up - too much grief/effort/possible tish, even though it'd been a planned and agreed route and as far as I know sod all has ever fallen down ........
But!!
Bucket on wheels
Well-known member
5,993 个心情 · 207 次分享 | 😂😂 #reels #sorotan #jangkauanluas #fbpro #lucu #ngagak | Munawar Bob
😂😂 #reels #sorotan #jangkauanluas #fbpro #lucu #ngagak.
www.facebook.com
Bucket on wheels
Well-known member
89 万次播放 · 3,613 个心情 | Patah bos #excavator #fyp | Heri Setiawan
Patah bos #excavator #fyp.
www.facebook.com
Bucket on wheels
Well-known member
6,166 次播放 · 3,652 个心情 | My favorite one 🤦♂️ | West Coast Operator 🧿🧿🧿🧿🧿
My favorite one 🤦♂️.
www.facebook.com
B
Brendan
Well-known member
My turn today, thanks to a local hire place not putting a metal bollard down, now have a broken front bumper.
Couldn't see it on the way out, apparently was hit by a truck so doesn't go down and another customer hit it a couple of days ago
Couldn't see it on the way out, apparently was hit by a truck so doesn't go down and another customer hit it a couple of days ago
B
Brendan
Well-known member
Bucket on wheels
Well-known member
43 万次播放 · 279 个心情 | Excavator’s worn-out pin. The pin appears to be severely damaged and is likely the cause of a malfunction. The surrounding metal shows signs of significant wear and tear, indicating prolonged use and/or inadequate lubrication.
Excavator’s worn-out pin. The pin appears to be severely damaged and is likely the cause of a malfunction. The surrounding metal shows signs of significant wear and tear, indicating prolonged use...
www.facebook.com
D
DaveDCB
Well-known member
D
DaveDCB
Well-known member
B
Brendan
Well-known member
Yep 🫣 wasn't visible on the way out and no sensors picked it up, speedy couldn't give a crapOh sh|* that’s your new truck isn’t it??!!
6
6feetdown
Well-known member
Like a modern art piece
V8Druid
do it as well as you can,but learn to do it better
S
Stroppymonkey
Well-known member
At the risk of sounding like my dad, surely you could see it at some point ,perhaps before you parked ?
Although sounds like exactly the sort of thing I would do. Buggered the near side mirror on the Dmax the other day by backing out of the shed at 0.5mph and just kissed it on door frame. Mirrors don’t fold well at that angle.
Gecko
Well-known member
To be fair:At the risk of sounding like my dad, surely you could see it at some point ,perhaps before you parked ?
- it is reasonable to expect the exit of a car park not to be booby trapped.
- when you exit, your eyes are looking for pedesrians, cars, bikes etc
D
DaveDCB
Well-known member
It’s the biggest problem with the newer pickups, the bonnets are so big you can’t see anything… just makes you think when the bollard is about the same height as. 2yr old kid… 
B
Brendan
Well-known member
As said you don't expect a bollard to just be left up, in the middle of the entrance
pettsy
Well-known member
TikTok - Make Your Day
vm.tiktok.com
Big Lifting job breaking out
B
Brendan
Well-known member
That's a big crane. Seen a video from the other side when the load went sideways. Seems like an issue with either the temporary bridge or badly loaded or poor positioning when driving over it
Footer block 1