Quattromike
Well member-known
Is there a hx82 under there, I'm after one 
Giles
Well-known member
I’d like to see you shoe horn it into a garden ride on tractor and go tractor pullingHad a few hours on my ship scrapping job
View attachment 27720
2150 hp @ 400 rpm
and tomorrow going to snip this up
V8Druid
do it as well as you can,but learn to do it better
's a bit big in comparison to that Deutz PaulHad a few hours on my ship scrapping job
View attachment 27721
this is the engine that ran itand yes that is my glove on one of the rocker covers
View attachment 27720
2150 hp @ 400 rpm
and tomorrow going to snip this up
View attachment 27722
.. I would deffo be in trubble with that arriving ..... bet it sounds nice though 
Mogman
What man as done, man can do, what never has,maybe
Is there a hx82 under there, I'm after one
what is a hx 82
Quattromike
Well member-known
Holset make them, it's like a whistle for the exhaust system
pettsy
Well-known member
Mogman
What man as done, man can do, what never has,maybe
Had to improvise the clamping on this awkward thing to bore a hole in it
to make this little wash basin for the workshop toilet area
will probably get it re-galvanised
to make this little wash basin for the workshop toilet area
will probably get it re-galvanised
D
DaveDCB
Well-known member
What machine are you going to fit that engine into? The Komogsuboat?
M
Monkeybusiness
Well-known member
s**t the bed - you are going all-out on the ‘shabby-chic’ bogs there, it looks like a Knutsford wine-bar!Had to improvise the clamping on this awkward thing to bore a hole in it
View attachment 27805
to make this little wash basin for the workshop toilet area
View attachment 27806
will probably get it re-galvanised
I might get you to give me a price for a couple of bathrooms in my house!
D
DaveDCB
Well-known member
Even the cistern lid is ‘reclaimed’
You have just found the long lost career you never knew you wanted!
V8Druid
do it as well as you can,but learn to do it better
do you think you'll manage to get yer nuts in that hand basin Mog??Had to improvise the clamping on this awkward thing to bore a hole in it
View attachment 27805
to make this little wash basin for the workshop toilet area
View attachment 27806
will probably get it re-galvanised
..... might no be quite big enough ....... gonna need a terry clip on the wall above .... keep yer dibber out the way 
Vinpetrol
Well-known member
I love this Mog. perfect too for giving your stones a quick dipHad to improvise the clamping on this awkward thing to bore a hole in it
View attachment 27805
to make this little wash basin for the workshop toilet area
View attachment 27806
will probably get it re-galvanised
Mogman
What man as done, man can do, what never has,maybe
Here is the light switch for the shitter and junction boxes for the office sockets
got them from a MOD side we stripped out a few years back
and theses are the lights I fitted too explosion proof
may need them after my brother has been to visit 
M
Monkeybusiness
Well-known member
Do you think he might roll your bog too? I know he has form but that would take an incredible amount of effort surely?Here is the light switch for the shitter and junction boxes for the office sockets
View attachment 27981
got them from a MOD side we stripped out a few years back
View attachment 27982
and theses are the lights I fitted too explosion proof
Mogman
What man as done, man can do, what never has,maybe
Bit of a crack
on the boom mount
held it up on the crane so we could get a bit of access
’veed’ out with arc gouging rods
filled with mig 1.2mm wire
not pretty but not a very handy place anyway won’t fall off
had to stick a bit of ally plate to keep the wind off the gas
on the boom mount
held it up on the crane so we could get a bit of access
’veed’ out with arc gouging rods
filled with mig 1.2mm wire
not pretty
but not a very handy place anyway won’t fall offhad to stick a bit of ally plate to keep the wind off the gas
M
Monkeybusiness
Well-known member
Did well to spot that!
Mogman
What man as done, man can do, what never has,maybe
Machine inspector doing yearly check found it (he’s very thorough)
came back next day and gave it the all clear
D
DaveDCB
Well-known member
One to recommend? I need afew doing!Machine inspector doing yearly check found it (he’s very thorough)
V8Druid
do it as well as you can,but learn to do it better
used to have one like that from Vulcan ..... but a decent chap with itMachine inspector doing yearly check found it (he’s very thorough)
as was Dave from Mercian who used to do all me lifting gear regime
Mogman
What man as done, man can do, what never has,maybe
He works for their insurance company I think
Footer block 1