Vinpetrol
Well-known member
Where can I buy Alemite grease gun connectors in uk ?
If not Alemite a very good alternative !
If not Alemite a very good alternative !
doobin
Well-known member
Lubrication Equipment - Lubrication Systems | Allube
Here at Allube we are the UK's leading lubrication engineers and specialise in the supply and installation of lubrication equipment. Allube Sheffield.
allube.co.uk
Got mine from here.
Storrsy
Well-known member
Whats good about the alemite ones?
I use these. Seems pretty decent...
www.trailertek.com
I use these. Seems pretty decent...
Grease Gun G Coupler 1/8" BSP
Product Features: 1/8 inch BSP thread. Fits all grease guns with this thread. Rated to max 10 000 psi. Spring-loaded grease coupler for easy and secure greasing.
www.trailertek.com
doobin
Well-known member
I used to use g couplers but they are so bulky and the alemite three jaw grip just as well.Whats good about the alemite ones?
I use these. Seems pretty decent...
Grease Gun G Coupler 1/8" BSP
Product Features: 1/8 inch BSP thread. Fits all grease guns with this thread. Rated to max 10 000 psi. Spring-loaded grease coupler for easy and secure greasing.
S
Smiffy
Well-known member
Whats good about the alemite ones?
I use these. Seems pretty decent...
Grease Gun G Coupler 1/8" BSP
Product Features: 1/8 inch BSP thread. Fits all grease guns with this thread. Rated to max 10 000 psi. Spring-loaded grease coupler for easy and secure greasing.
They don't leak and don't fall off.
And their guns are really good too. The two speed pistol grip is all you need outside of the workshop.
V8Druid
do it as well as you can,but learn to do it better
bought one of these a while back ... 6 gripper jaws .. clings like a limpet and a real narrow nose - POP to get on/off and no leaksWhats good about the alemite ones?
I use these. Seems pretty decent...
Grease Gun G Coupler 1/8" BSP
Product Features: 1/8 inch BSP thread. Fits all grease guns with this thread. Rated to max 10 000 psi. Spring-loaded grease coupler for easy and secure greasing.
also have one of these three jaw jobs (similar to the Saker ones) which seem to grip better than the original 4 jaw genuine G-couplers (which I also have and leak the most/given the most trouble)
Saker version
Last edited:
Gecko
Well-known member
A variation on the theme - probably better for tight spaces
One thing to remember: grease nipples come in many different shapes -some easier to grip and seal than others
One thing to remember: grease nipples come in many different shapes -some easier to grip and seal than others
D
DaveDCB
Well-known member
Must admit now I’ve gone cordless grease gun I don’t use the g -coupler as you have a spare hand anyway.. biggest problem is getting the connector off when it’s under pressure!
Gecko
Well-known member
It arrived today - almost as shown. Six jaws, not four - probably better.
I'll get to test it in a few weeks.
Giles
Well-known member
Had my grease gun stolen out back of truck as it’s a dewalt one in box guess they thought it was a drill not a grease gun covered in grease
Had g coupler on it and had a long thin adapter for Takeuchi boom pins was a good find but can’t find it again. Must have been about 8mm thick and normal threaded connector on end and 120mm long didn’t clip over nipple but could press and hold it on can’t find it now to replace it
Ok found it
Had g coupler on it and had a long thin adapter for Takeuchi boom pins was a good find but can’t find it again. Must have been about 8mm thick and normal threaded connector on end and 120mm long didn’t clip over nipple but could press and hold it on can’t find it now to replace it
Ok found it
Attachments
Last edited:
M
Monkeybusiness
Well-known member
So you grab that with the g-coupler? Looks ideal!
6
6feetdown
Well-known member
I bought a G cpl 2 years ago but had that same problem. Can you send a link?
Pedrod355
Well-known member
Anyone try’d these?
M
Monkeybusiness
Well-known member
Are they the screw on ones? I fancy giving them a go!
Pedrod355
Well-known member
Yeh, Think will try my self seem good reviews
Gecko
Well-known member
I've got one, but yet to fit it.
I need to swap a few nipples to allow access for the longer chucks.
I assumed the collar was spring-loaded and only needed a fraction of a turn to open/release, but it's a fairly normal thread and may take two hands to nip it up.
I suspect it'll be easier to use on a rigid rather than a flexible tube.
Vinpetrol
Well-known member
What’s the point of them ? If you need to turn the end to lock them on and you need to change some nipples what is the advantage over other grease gun heads ?
Gecko
Well-known member
Changing the nipples isn't a big issue, I like having straight-on access as it gives the best chance of a seal regardless of chuck style.
As for the chuck it's self, I'm failing to get excited.
Maybe, once on, it'll lock solidly, maybe it'll give a superior seal.
Maybe not.
Pedrod355
Well-known member
Got the dewalt battery gun every time you take g coupler off another squirt seeps out meaning need to wipe off to save a mess?
Vinpetrol
Well-known member
Keep us posted !
Footer block 1