J
Jimoz
Well-known member
Richer sounds is good shop to buy tellys. 7yr warranty as standard
J
Jimoz
Well-known member
...terms and conditions apply does not include pussies playing rough!
V8Druid
do it as well as you can,but learn to do it better
used to have an excellent reputation
Cyberprog
Well-known member
Used to enjoy their chilly Willie's!
(Free ice pops for the kids, ideal to get the dad's to come in!)
TiltyShaun
Well-known member
Sorry Fred, the devil is in the detail!!! The wording is “ If you only have a calling plan with BT, the standard connection charge is normally £140.”no they dont have to supply only 1. The standard charge is £140 quid for a phone line. Dont mention internet until the phone line is installed as that is covered by separate law and they can charge you mega bucks for it.
Costs to install a new BT phone line or reconnect an old one | Landline Help | BT Help
Find out how much it costs to install or reconnect a BT phone line. Learn when charges apply, the standard fee, and what the cost covers.www.bt.com
The normally bit is the painful part if there is in sufficient cable to provide the service.
V8Druid
do it as well as you can,but learn to do it better
arty one for yers all ...
5 pm and it's pitch black
Reo progressing quietly down the length .... hindered by the bloody weather
been too wet the last couple of days so he's gone off to put a shed base in for one of his regulars ...
and I've been making space for a Harrison ....
found this tucked in a corner I'd forgotten about .. little bar bender for making staples for a BWW job years ago .. odd legs for cellular pocket soil retention stuff on canal banks ...
's made a few thousand staples that
also found a small rodents home in a radiator box on a shelf .... found the rodent in a light fitting, months ago .... he'd obviously been here some time ...
and this was the box / tray, under that rad box
who was a busy little fella then ??!!!
last couple of mornings have been some bit white
and equally foggy
can't see up to the gates at the end of the drive tonight .... been like it all day ... not conducive to doing a great deal out doors ... brass monkeys are all hibernating ATM ..... forecast's not a great deal better for a few days yet ..... Tuesday looks set for fine and dry ... ideal lathe unloading weather some sun would be nice too
5 pm and it's pitch black
Reo progressing quietly down the length .... hindered by the bloody weather
been too wet the last couple of days so he's gone off to put a shed base in for one of his regulars ...
and I've been making space for a Harrison ....
found this tucked in a corner I'd forgotten about .. little bar bender for making staples for a BWW job years ago .. odd legs for cellular pocket soil retention stuff on canal banks ...
's made a few thousand staples that
also found a small rodents home in a radiator box on a shelf .... found the rodent in a light fitting, months ago .... he'd obviously been here some time ...
and this was the box / tray, under that rad box
who was a busy little fella then ??!!!
last couple of mornings have been some bit white
and equally foggy
can't see up to the gates at the end of the drive tonight .... been like it all day ... not conducive to doing a great deal out doors ... brass monkeys are all hibernating ATM ..... forecast's not a great deal better for a few days yet
..... Tuesday looks set for fine and dry ... ideal lathe unloading weather some sun would be nice too
Last edited:
V8Druid
do it as well as you can,but learn to do it better
Spoke to the man in Selby this afters ..... he was just loading the Harrison ... to ask him what he'd take for this ..... as he was coming this way
been pondering on it for a couple of days ...... sold the bugger Friday .... would've made a very versatile table that
Should be here between 11 and 1 tomorrow apparently
been pondering on it for a couple of days ...... sold the bugger Friday
.... would've made a very versatile table that Should be here between 11 and 1 tomorrow apparently
Cyberprog
Well-known member
Well, we all know what you'll be doing then!Spoke to the man in Selby this afters ..... he was just loading the Harrison ... to ask him what he'd take for this ..... as he was coming this way
been pondering on it for a couple of days ...... sold the bugger Friday
Should be here between 11 and 1 tomorrow apparently
Figuring out where to slot it in one of your boxes!
V8Druid
do it as well as you can,but learn to do it better
already had that sorted Alex .... and cleared some time ago, for one that didn't happen
..... today however john arrived at half one .... a good twenty years younger than i was expecting !! early/ Mid 30s and a real nice bloke with it ... liked him a lot and will keep an eye on his items for sale.ran it up on the truck, 'fore I lifted it off and runs sweet enough
and went through the gear box / feeds .. also discovered that although it's primarily an imperial machine ... it'll also do metric threads and has a back gear changeover to accomplish that which was a bonus 'Fraid there ain't that many pix guys .... been a busy afternoon ......
and what there are ain't great ... been a dull old afternoon, after a lovely start to the day ...
splash guard had to go .... wants straightening out a bit anyway ... will sort it and give it a coat of grey ....
can go back on when I've more room for it
lifted it part way in as a whole .. COG's a long way down the bed on this ... so went in the rest of the way on a roller at the tail stock end, with a few juggles / shunts ....
ran out of daylight quick today .....but it's in
got some sort of copying/taper turning set up on the back of it so kept it out a bit, but needed to for the full cross slide travel and the chip tray to go all the way back in ..... better pix tomorrow .. was black by the time i'd tidied up .... wants a bloody good clean ...... lifting lugs were also very useful
GazCro
Well-known member
GREY! There was me thinking you only did shades of brown 
Cyberprog
Well-known member
Looks like a fun day was had!
Lancs Lad
Well-known member
Bingoalready had that sorted Alex .... and cleared some time ago, for one that didn't happen
ran it up on the truck, 'fore I lifted it off and runs sweet enough
'Fraid there ain't that many pix guys .... been a busy afternoon ......
View attachment 19799
and what there are ain't great ... been a dull old afternoon, after a lovely start to the day ...
splash guard had to go .... wants straightening out a bit anyway ... will sort it and give it a coat of grey ....
View attachment 19800
can go back on when I've more room for it
lifted it part way in as a whole .. COG's a long way down the bed on this ... so went in the rest of the way on a roller at the tail stock end, with a few juggles / shunts ....
View attachment 19805
ran out of daylight quick today .....but it's in
View attachment 19806
got some sort of copying/taper turning set up on the back of it so kept it out a bit, but needed to for the full cross slide travel and the chip tray to go all the way back in ..... better pix tomorrow .. was black by the time i'd tidied up .... wants a bloody good clean ...... lifting lugs were also very useful
at last..you ran it on his truck?
V8Druid
do it as well as you can,but learn to do it better
wasn't coming off if it didn't run sweetBingo
V8Druid
do it as well as you can,but learn to do it better
my feet are hanging off ..... been up/down/in out of the Drema A LOT this afters Alex ... got that in there on me own
GazCro
Well-known member
Too right. Went to buy a 900mm power float off a fella a few yr back, fired it up in the back off his tranny tipper to check it. You should have seen his face, mind floor was that rotten it nearly dug a hole in itwasn't coming off if it didn't run sweet
Cyberprog
Well-known member
Need to be careful with that dude - you're not getting any younger!
V8Druid
do it as well as you can,but learn to do it better
don't forget the Druid gold GazGREY! There was me thinking you only did shades of brown
..... lathes don't look right in brown and gold Boyo ... and apparently there're at least 50 shades of grey
V8Druid
do it as well as you can,but learn to do it better
the bloody feet aren't for sure Alex
.... the rest is fine ... and it all felt fine ................................. 'til I sat down ............. and tried to get back up
Cyberprog
Well-known member
Get some rest! You can play with the new toy tomorrowthe bloody feet aren't for sure Alex
V8Druid
do it as well as you can,but learn to do it better
you say that as if there was ever a doubt I'd find summat that I liked .... found plenty .... just didn't like some of the prices!!Bingo
... my gear doesn't earnFooter block 1