Druidic Dabblings and General Twaddle !!

GazCro

GazCro

Well-known member
hmmmm ..... might pull the burner out tomorrow and eyeball it then :rolleyes: cheers Boyo ....... no question when Vicki's Danesmor needs doing ... it lets you know :unsure:😂
I give it a clean out and a nozzle every 2 year now.
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
I give it a clean out and a nozzle every 2 year now.
if red 'disappears' on schedule, as threatened, it'll be getting converted from Kero to gas oil ... only a nozzle change required ... but it will mean access to red deliveries that you'd not get, without a legit reason, like heating yer hooose
 
GazCro

GazCro

Well-known member
if red 'disappears' on schedule, as threatened, it'll be getting converted from Kero to gas oil ... only a nozzle change required ... but it will mean access to red deliveries that you'd not get, without a legit reason, like heating yer hooose
I bet that's a loophole which closes fast if red goes.
 
B

bobthebuilder

Well-known member
we need a lot Jim ... 70+m run, plus the steps and upper deck/landing area .... and TBH, I have no desire to go wandering about the place ATM. Most reclaim is going to be totally random in sizes including thickness and colour :(
Try richard holland ,at the home of stone ,has allsorts in his yard
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Try richard holland ,at the home of stone ,has allsorts in his yard
tried him thanks Boyo ... 20mm flags or 60mm copes .. :rolleyes: which ain't wide enough :( and no good for the steps element

these arrived this morning .... bloody heavy crates :oops:
WP_20201022_12_32_12_Pro.jpg

I'm hoping one of 'em is solid gold ... for the price !! :unsure::oops: ... believe it or not there's 54m2 in that lot

box with the wrapping off'd been opened before it got here and the first thing I find is .....
WP_20201022_17_27_05_Pro.jpg

a bloody grey 6 x 6 :mad: we will be having words as there're a few in the others looking suspect 🤬..
although they're still wrapped, they'm 'sposed to all be brown .... if that's the only one it'll do for a gate pillar cap stone .... any more will be a PITFA ... and up for negotiation .... they don't have any more to swap for as we cleaned 'em out all bar a few 450 x 600s .... nothing due to arrive, as India has a few issues with covid currently and no idea when or if they'll see any more deliveries? :(:rolleyes:

and on the subject of deliveries ... white jiffy arrived in the post and I' wondering WTF o_O is in it .... as wasn't expecting anything ?? :unsure:
anyway ... opened it up and ...
WP_20201022_15_31_53_Pro.jpg

invoice from Tom for me barrel of Plantohyd, with a little 'sweetener' :LOL: ....
Thank you @exc@v8 ...... what's the immortal phrase .. the cheque's in the post :giggle::giggle: (y) ...... well the ether actually

better day today than yesterday's monsoon conditions .... Reo was well and truly rained off yesterday
but got a bit down today ... starting to get slowed up by limited stone choice and working on his knees all day

WP_20201022_08_14_10_Pro.jpg

WP_20201022_15_51_57_Pro.jpg
WP_20201022_15_52_05_Pro.jpg

still manages to make it look great though and make progress ....... he's gotten more done today than I have, especially with Clara's arrival mid afternoon .... :rolleyes: .... GRAND DAD !! LOL :giggle::LOL:
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
end of the day Friday ... and he's ripping along .. :)
WP_20201023_16_50_58_Pro.jpg

WP_20201023_16_51_07_Pro.jpg

WP_20201023_17_01_56_Pro.jpg

nearly there :giggle:
saturday was appalling :mad:..... so we did some concreting :oops::unsure: ..... filling 9" hollows .... Mr Readimix was batching it quicker than i could get it down the bloody holes ... a barra'd do two holes and every pair were further away than the last:cry:
WP_20201024_17_18_51_Pro.jpg

WP_20201024_17_19_07_Pro.jpg

WP_20201024_17_19_18_Pro.jpg

jez did it bloody rain .... but it had/needed to be done and it meant a day for Reo ... 4.5 dumpies and ferk knows how many polys of cement and we'd both had enough ... he's an animal on the shovel filling the mixer .... picked the bags right beside the mixer and he'd just fill fill fill the bugger. Knocked it about two with it running out of our backsides.

next day was a total write off :(
Monday was ..... a tad better and Mr. readimix was at it again .... and we filled the last couple of runs in four hours ... too wet to lay, so Reo called it a day and went off to cut some firewood for his place.
had dried up by three and I set about creating a tool for digging a 4" trench, behind the wall to give us that extra bearing for a 600 wide slab .... sod cutting that lot .... easier to make it all wider :rolleyes:
WP_20201026_15_09_19_Pro.jpg

Mk1
WP_20201027_15_34_38_Pro.jpg


a half decent day yesterday and Reo was back laying ..... no idea what it looks like or how far he got .... had to go into town yesterday afternoon :oops: and was dark and covered, by the time i got back .... we'll all have to wait to see :giggle::rolleyes: ...... town was like the Marie Celeste ...

this morning was .............. bloody wet again .... was surprised to see Reo TBH, but he was up for it, so Mk1 got a try out .....
WP_20201027_09_42_15_Pro.jpg

neat eh :giggle: 4" required ... 4" dug ... down to the inner skin .....
and getting filled ...
WP_20201027_09_52_51_Pro.jpg

the grass'll grow back ... as it always does :rolleyes::( ... bit of a trampling won't hurt it ...... too much
next stretch at the far end and then worked back
WP_20201027_11_39_13_Pro.jpg

WP_20201027_12_03_42_Pro.jpg

top two still to do ... but didn't want to get too close to the freshly laid bits today ...... but made a hell of a dent in it ... considering the poxy weather... again ... even Pam was out helping, on a barrow and clearing up/back .... one o'clock and we'd all had enough of a wetting .... but'd got 90% of the one stretch done
WP_20201027_13_31_17_Pro.jpg

just in time for the sun to come out ..... :rolleyes: ..... I tidied up and Reo went off to caress his chainsaw again :LOL:
breakfast went down well 'bout two .... was bloody starving!!

gave Mk1 a few mods after that .... pix next time ... but you'll know what was required .....

subject to weather tomorrow it'll either be (a)Lashing down and I'll get a lie in, 'cos Reo'll be having one too (b) if it's dry I'll be up to open up and Reo'll be finishing off his stone run to the gate pillar, or (c) it'll be too wet to lay stone so this lot'll get some attention from Mk2 ...
WP_20201027_16_16_18_Pro.jpg

bugger ..... out of pix again
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
WP_20201027_16_16_26_Pro.jpg

and this'll be the last run of any length ...
WP_20201027_16_16_43_Pro.jpg

few odds an' sods to sort, fore we can start to look at what slabs/flags 're going where.
We're gonna need a few more dumpies first though ...... 'bout 30% left of one out of seven :oops: ... got an email yesterday saying they'm, open though (y) and'll prob.s be able to drop stuff out same day, with luck .... bell 'em in the a.m. and get some sorted. Forgot this afters:mad:

'sa fair ol' wall
WP_20201027_16_16_58_Pro.jpg

an' there's damned near 40 feet behind me there
got in the 'Drema Sunday to move some bags and had no rear/side view screen .... just black, so either blown a fuse some where or yon screen has died ... no image from either camera ? :unsure::mad: annoying being blind creeping about in the tight space 'tween shed and trellis ... too wet and busy to be fannying about trying to sort it ... job for a drier day ......
not having a lot of luck with screens ATM ... old faithful's screen didn't want to come up for me last night
at me desk .... did eventually, but I fear it may also be on its way out ..... but is fine once up .... did it again to me this morning :mad:, so'll not be knocking it off for a while as I really need me 'puter ATM, for ongoing farm biz ....... sod's bloody law !! :rolleyes::mad:

And on the BB front ..... had openreach's engineer #9 here last Friday ..... Josh from SSE is still giving them sh1t on a daily basis ... changed a couple of junctions, one of which covered me in water, when he opened it up (I was footing his ladder - that he wasn't 'sposed to be up - what ladder??? :unsure:;):giggle:) so that's yet another two 'non existent' fault sorted .. Tidy young fella ... they've all been good, fair play .... had one of these to fix to the top of his triple ladder ..... our pine end is a long way up, round by the wood shed ... a looooong way ... and getting a triple up there is hard work ..... without this ...
WP_20201023_12_28_23_Pro.jpg

WP_20201023_12_28_28_Pro.jpg


POP with it though and keeps you off the soffet too ... need one of these :giggle::cool:

'Net was bloody dire Sunday evening ---- less than a meg and had to reboot the router a few times ...... :cry: .. the new router :mad:🤬
 
Last edited:
V8Druid

V8Druid

do it as well as you can,but learn to do it better
An engine :unsure:
🤣🤣 sadly not .... If I could get the Micron at it I'd have knocked out a 4" for that ... :rolleyes::giggle: ... didn't take us long TBH, but was pretty heavy going ... ground is absolutely sodden
 
diggerjones

diggerjones

Well-known member
You went for the 600mm wide ones then. 22mm calibrated. Have they got score marks on the back.
Did reo mention the sbr?
 
Lancs Lad

Lancs Lad

Well-known member
end of the day Friday ... and he's ripping along .. :)
View attachment 18702
View attachment 18703
View attachment 18704
nearly there :giggle:
saturday was appalling :mad:..... so we did some concreting :oops::unsure: ..... filling 9" hollows .... Mr Readimix was batching it quicker than i could get it down the bloody holes ... a barra'd do two holes and every pair were further away than the last:cry:
View attachment 18705
View attachment 18706
View attachment 18707
jez did it bloody rain .... but it had/needed to be done and it meant a day for Reo ... 4.5 dumpies and ferk knows how many polys of cement and we'd both had enough ... he's an animal on the shovel filling the mixer .... picked the bags right beside the mixer and he'd just fill fill fill the bugger. Knocked it about two with it running out of our backsides.

next day was a total write off :(
Monday was ..... a tad better and Mr. readimix was at it again .... and we filled the last couple of runs in four hours ... too wet to lay, so Reo called it a day and went off to cut some firewood for his place.
had dried up by three and I set about creating a tool for digging a 4" trench, behind the wall to give us that extra bearing for a 600 wide slab .... sod cutting that lot .... easier to make it all wider :rolleyes:
View attachment 18708
Mk1
View attachment 18709

a half decent day yesterday and Reo was back laying ..... no idea what it looks like or how far he got .... had to go into town yesterday afternoon :oops: and was dark and covered, by the time i got back .... we'll all have to wait to see :giggle::rolleyes: ...... town was like the Marie Celeste ...

this morning was .............. bloody wet again .... was surprised to see Reo TBH, but he was up for it, so Mk1 got a try out .....
View attachment 18713
neat eh :giggle: 4" required ... 4" dug ... down to the inner skin .....
and getting filled ...
View attachment 18716
the grass'll grow back ... as it always does :rolleyes::( ... bit of a trampling won't hurt it ...... too much
next stretch at the far end and then worked back
View attachment 18717
View attachment 18719
top two still to do ... but didn't want to get too close to the freshly laid bits today ...... but made a hell of a dent in it ... considering the poxy weather... again ... even Pam was out helping, on a barrow and clearing up/back .... one o'clock and we'd all had enough of a wetting .... but'd got 90% of the one stretch done
View attachment 18720
just in time for the sun to come out ..... :rolleyes: ..... I tidied up and Reo went off to caress his chainsaw again :LOL:
breakfast went down well 'bout two .... was bloody starving!!

gave Mk1 a few mods after that .... pix next time ... but you'll know what was required .....

subject to weather tomorrow it'll either be (a)Lashing down and I'll get a lie in, 'cos Reo'll be having one too (b) if it's dry I'll be up to open up and Reo'll be finishing off his stone run to the gate pillar, or (c) it'll be too wet to lay stone so this lot'll get some attention from Mk2 ...
View attachment 18721
bugger ..... out of pix again
That is some BL**Dy wall.
Ww3 Russia drops the bomb...the yanks send a spy plane .."all we can make out is a strange curved structure in Wales"🙄
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
You went for the 600mm wide ones then. 22mm calibrated. Have they got score marks on the back.
Did reo mention the sbr?
38mm thick Dylan .... no choice .. had to be 600s x 450/600/900 .... cleaned 'em ot and had just enough with some size juggling ... and yeh scored on the backs .. get you a pic tomorrow ...... 22mm would look like floor tiles on top of that wall mate .. 's a BIG wall .... I am only planning on doing it once
Aye, Reo'd left two cans in Norfolk ... good job I'd ordered 5 litres ... dunno whether we'll need any more?? 54m2 to put down .... gonna be a lorramuck :oops::rolleyes:
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
That is some BL**Dy wall.
Ww3 Russia drops the bomb...the yanks send a spy plane .."all we can make out is a strange curved structure in Wales"🙄
:LOL::LOL: 70+ M, plus the step returns, etc ... before we bought Chez Druid there'd been a lower one on the same line ... 6" blocks on a 12" footing, with ZERO drainage behind it ... it apparently succumbed to gravity and a lorrawater one day and laid down for a nap on the driveway
this un is two 9" skins - hollows solid filled ... 9" stone face, 18 " of clean 40mm behind, full depth and 12" perf pipe at the bottom of the 40mm. All sat on a 36" wide footing a good foot or more thick ..... I will be ****ing gutted if this one lies down for a nap ... do it once .. and make sure it'll stay put ;)
 
Cyberprog

Cyberprog

Well-known member
I have a V shaped bracket like that, doubles as a standoff and corner bracket.
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
I have a V shaped bracket like that, doubles as a standoff and corner bracket.
but does it have the wheels to roll the ladder up the wall Alex? so much easier to run it 20 odd feet up the wall :cool: .... like the corner idea too
 
Top