GazCro
Well-known member
Happy birthday Gra
tinydigger
making machines look small since 1980
happy birthday oh druid of the welder
Mark
Well-known member
thank you guys.... 21 again ... X3 exactly
happy birthday Druid, age is just a number your only as young as you feel
Stubota86
Well-known member
Happy Birthday Druid!
Flying Torquewrench
Active member
Happy Birthday Graham.
Big Jordy
Well-known member
Happy birthday Druid.. hopefully many many more
V8Druid
do it as well as you can,but learn to do it better
again ... thank you all guys ...
you ain't seen these
the other 60 candles wouldn't fit on the cake ... and Clara'd have no chance of putting them out ....... without an extinguisher
first time anyone's been through the doors in eleven weeks ... besides us and the cats
hell that little girl is growing fast ........ I wannacuddle ... while I can still pick her up
you ain't
seen these the other 60 candles wouldn't fit on the cake
... and Clara'd have no chance of putting them out ....... without an extinguisher first time anyone's been through the doors in eleven weeks ... besides us and the cats
hell that little girl is growing fast
........ I wannacuddle ... while I can still pick her up
Last edited:
V8Druid
do it as well as you can,but learn to do it better
aye .. very true ... was 19 for a long time ... then jumped to circa 23, but the last few years have caught up to, considerably closer to the body's age ... and some mornings well past ithappy birthday Druid, age is just a number your only as young as you feel
R
Rob65
Well-known member
Happy birthday old chap.
Since it looks like no one got you a present - What did you buy yourself and where do I need to pick it up from?
trailer is at the ready.......
Rob
Since it looks like no one got you a present - What did you buy yourself and where do I need to pick it up from?
trailer is at the ready.......
Rob
CPS
Well-known member
Happy birthday Graham
V8Druid
do it as well as you can,but learn to do it better
LOL .... been sat on a pallet for a couple of weeks, up country, waiting for me to book pallet-freight to go collect it .... if they'm extending 'shielding' I might as well just get on and sort it ..... and suffer the ear ache when it turns up
V8Druid
do it as well as you can,but learn to do it better
well this stayed hung up the other way, the other day, after a second coat of shiny tish ..
and I turned my attention to some bosses ..
wonderful things, flap wheels
cleaned/de-burred the centre too ..
and laid some hot stick down around the bosses ..... followed by some Druid gold
yesterday, now't got did ... don't usually eat much at lunch time, so was burgered after a belly full and the weather wasn't exactly conducive to doing a lot either ....
not been much better today really ... blowing a hooley still and rain on/off .. but thought sod it ... slung the Cranab on the bench
and hauled the cylinder out......
........ to re-attach its plumbing
'fore juggling it back into spot ...
put the ratchet strap back on it, 'til it's had some oil to keep it shut, when it gets 'lofted', greased up the pins ...
.. and tidied up just before it lashed it down again
and that was the end of play outside, for today ...
and I turned my attention to some bosses ..
wonderful things, flap wheels
cleaned/de-burred the centre too ..
and laid some hot stick down around the bosses ..... followed by some Druid gold
yesterday, now't got did ... don't usually eat much at lunch time, so was burgered after a belly full and the weather wasn't exactly conducive to doing a lot either ....
not been much better today really ... blowing a hooley still and rain on/off .. but thought sod it ... slung the Cranab on the bench
and hauled the cylinder out......
........ to re-attach its plumbing
'fore juggling it back into spot ...
put the ratchet strap back on it, 'til it's had some oil to keep it shut, when it gets 'lofted', greased up the pins ...
.. and tidied up just before it lashed it down again
and that was the end of play outside, for today ...
diggerjones
Well-known member
Can you speak welsh Graham. Random question
diggerjones
Well-known member
Did you here from ollie
V8Druid
do it as well as you can,but learn to do it better
only the odd word or phrase Dyl .... think Vicki can ? ... she did it in school .. compulsory .. she wanted to do French, which i considered a far better use of her time and she was much better at it ... ****ing syllabus won
... what bollox
V8Druid
do it as well as you can,but learn to do it better
nothing mate ... but must confess to forgetting to try him on the phone
Richard Hunton
Well-known member
Happy belated birthday Graham hope it was a good one 
Mogman
What man as done, man can do, what never has,maybe
⚒
Left hooker
Well-known member
Happy birthday for yesterday gra was a bit pre occupied degreasing digger again after 2nd hose went with in 4 days of 1st one and only cleaned it 2 days prior while doing child care as well 
V8Druid
do it as well as you can,but learn to do it better
stuck me beam back together today ... after i'd recovered the roller, from a pile of stuff, that'd been dumped on top of it
dropped the pick up back on and greased the bosses
what you can't see are the inch spacers/packers under the beam, setting the roller an inch below the front edge/underside
it's variable from an inch below to a quarter inch below
then, having had to sort out extricating the roller, thought I'd get this out while I was at it
me other B20, six footer
for a good clean and some not so shiny tish
it really needs a new edge, but is solid enough ATM ..... it'll get one eventually ... once I'm 'allowed' deliveries
Got me favorite three foot Geith to do .... once I find somewhere to empty the damned thing of the various bits of conc. and hardcore that've accumulated in it the, last few months ... I have a spot in mind ... and weld up its bosses too, which're only tacked on ATM ......
then got all me 50mm VA-r buckets to tackle .....
the boss is much happier about 'em all looking tidier and not just rusty buckets
If I'd known, I'd have painted 'em ages ago, for a lot less ear ache .....
5 gallons of Hydrema yellow'd be handy too ..... and get the spray gun out
can always tell when tea time approaches ... my 'supervisor' arrives, watching and waiting for me to go down the house ... and feed him
Squeaky's 16lbs ... but eats less than my co-pilot .... who is half his size
dropped the pick up back on and greased the bosses
what you can't see are the inch spacers/packers under the beam, setting the roller an inch below the front edge/underside
it's variable from an inch below to a quarter inch below
then, having had to sort out extricating the roller, thought I'd get this out while I was at it
me other B20, six footer
for a good clean and some not so shiny tish
it really needs a new edge, but is solid enough ATM ..... it'll get one eventually
... once I'm 'allowed' deliveries Got me favorite three foot Geith to do .... once I find somewhere to empty the damned thing of the various bits of conc. and hardcore that've accumulated in it the, last few months ... I have a spot in mind ... and weld up its bosses too, which're only tacked on ATM ......
then got all me 50mm VA-r buckets to tackle
.....the boss is much happier about 'em all looking tidier and not just rusty buckets
If I'd known, I'd have painted 'em ages ago,
for a lot less ear ache .....5 gallons of Hydrema yellow'd be handy too ..... and get the spray gun out
can always tell when tea time approaches ... my 'supervisor' arrives, watching and waiting for me to go down the house ... and feed him
Squeaky's 16lbs ... but eats less than my co-pilot .... who is half his size
Last edited:
Footer block 1