V8Druid
do it as well as you can,but learn to do it better
LOL Shaun .... posting what ???
LOL Shaun .... posting what ???
TiltyShaun
Well-known member
Things!!! Like you have been doing on CEF. I can now comment on them!!
V8Druid
do it as well as you can,but learn to do it better
Things!!! Like you have been doing on CEF. I can now comment on them!!
Ah right
....... with you Shaun .... my usual exploits as they occur ...... looks like I may well have no choice anyway ...... .. still ain't looking good It may be a bit difficult for some folk to pick up on, if they're not familiar
.... as a continuation ... but we'll suck it and see .If I assume familiarity with what's gone before on CEF and anyone who's lost,
just holler for more detail/info./whatever, if need be
V8Druid
do it as well as you can,but learn to do it better
OMG .... that's a monster witter ..... no problem, but'd hate to bore the t*ts off folks
do you want chapter and verse, or anything specific @Thomas7740 ??
.... there is a loooooooooooooooot of it
T
topkit
Well-known member
Quack quack i am missing the Duck whats been happening in Wales then i hope the weather is being kind to you, i have been busy putting new drainage in and extending our round pen ready for winter usage as i havent got a dumper (yet)! I am using both backhoe loaders which is a bit of an overkill.
V8Druid
do it as well as you can,but learn to do it better
there's a little bit on page 1 here TK
...... looks like this may have to become 'home' for it too .... t'other ain't been looking good all weekend ..... could think of worse places to migrate it to though ... great facilities ..... almost as good as Maskinisten ... sorry @Regy53, but only 10 pix!! ?? LOL As for the weather .... pissy wet most of the day
Last edited:
JD450A
Feral as Fk 🐾
Your levelling has improved over the years, as we can see the original attempt above, haha
V8Druid
do it as well as you can,but learn to do it better
wasn't bad for a jake Rory
... especially as I'd not had it that long ... the ground under there was a seriously hard shale layer and had to follow the topography to a degree ..... the 'Drema upped my game significantly ... once I'd mastered ISO, after the X pattern ....... yer cheeky twaddle dealer these seem like a lifetime ago
doobin
Well-known member
Looks like the plugs finally been pulled on the old forum. Why couldn't that dickhead simply hand over the keys to someone who cared and even offered money? What a waste.
V8Druid
do it as well as you can,but learn to do it better
Regy53
I like cake
I want to say its being updated, i posted this group on my linked in which Julian saw i think so he knows it exists. Might have made him do something. Also might not and its possible the forum has gone bad, or the hosting has stopped or somthing
If it was being updated It shouldnt go down like it has, it would be written and then updated on the forum itself. It should take half hour for a update to take place a bit like when we made this live It took no time once it was written.
Its a shame to lose that member base but to be fair it was a desert anyway. I would be sad if it did re-appear updated as it would make sense to go back but then i am sad its gone so who knows.
If it was being updated It shouldnt go down like it has, it would be written and then updated on the forum itself. It should take half hour for a update to take place a bit like when we made this live It took no time once it was written.
Its a shame to lose that member base but to be fair it was a desert anyway. I would be sad if it did re-appear updated as it would make sense to go back but then i am sad its gone so who knows.
K
Komatsu
Well-known member
It wouldn’t make any sense to go back, because we’d all only end up getting mugged off by Juian again, a year or so down the line, he’s had more than enough chances by a number of people on here to get his act together and he hasn’t, think Rory hit the nail on the head the other year after Plantworx when a comment was made about if Julian came across to your stand, no he didn’t, but did any of us go acoross and see him? No.
What you’ve done on here Ross is great, seems to be quite a number of new faces coming on board, the picture posting is second on none, and I know it’s actually put some people back in touch with each other, which can only be a good thing. Onwards and upwards, it’s a new chapter
V8Druid
do it as well as you can,but learn to do it better
it's been back up since this morning
..... I'd be guessing that whoever maintains the server don't work weekends
V8Druid
do it as well as you can,but learn to do it better
bit more on the witterings front ......
I've been looking for a turret mill for quite a while and had found a real tidy Ajax, not far from me, full DRO, ex training school, so light use and very nice.
had been in touch with the guy quite a while back, but could never nail him down to a day, to go take a look ..... mostly to have a suss of HTF to get it from there ... at a sensible cost, as he had no way of loading it ... and to decide exactly which model it was .... they [Ajax] make four ... one of which is a LUMP!!
From dimensions supplied i'd eventually worked out which model it was and was about a ton, so if i could find either an FLT local, or a suitable beam to hang a 3t pull-lft off, it'd happily go in me trailer, behind the P38 ...... then he went quiet for a few weeks
I eventually got some further com.s from the seller, only to find he'd blown it and a load of other gear out to a dealer, to clear it all for the new term's start .. he'd had three of these!! ...Was well pissed off!!! ..... would've been ideal.
so new Ebay saved search entered and see what crops up.
would've preferred this over a Bridgeport .... heavier built all together !!
I was absolutely gutted .... was very cheap
Like new or damned near it .... if I'd known he'd had three, I'd have been up there with a truck and hiab and had all of 'em ... very re-sale-able ... especially at the price he was asking ... well under half of what they usually make. and kept the best one for meself !!
these don't come up very often .... especially not in this condition !!
I've been looking for a turret mill for quite a while and had found a real tidy Ajax, not far from me,
full DRO, ex training school, so light use and very nice. had been in touch with the guy quite a while back, but could never nail him down to a day, to go take a look
..... mostly to have a suss of HTF to get it from there ... at a sensible cost, as he had no way of loading it ... and to decide exactly which model it was .... they [Ajax] make four ... one of which is a LUMP!! From dimensions supplied i'd eventually worked out which model it was and was about a ton, so if i could find either an FLT local, or a suitable beam to hang a 3t pull-lft off, it'd happily go in me trailer, behind the P38 ...... then he went quiet for a few weeks
I eventually got some further com.s from the seller, only to find he'd blown it and a load of other gear out to a dealer, to clear it all for the new term's start .. he'd had three of these!! ...Was well pissed off!!! ..... would've been ideal.
so new Ebay saved search entered and see what crops up.
would've preferred this over a Bridgeport .... heavier built all together !!
I was absolutely gutted .... was very cheap
Like new or damned near it .... if I'd known he'd had three, I'd have been up there with a truck and hiab and had all of 'em ... very re-sale-able ... especially at the price he was asking ... well under half of what they usually make.
and kept the best one for meself !!these don't come up very often .... especially not in this condition !!
Attachments
V8Druid
do it as well as you can,but learn to do it better
well the Lloyd went on .... without the SMP ..... bit tight with it apparently and won't flow enough oil anyway
face shovel style was easier ... for running / loading it ... does a hell of a job
got 3 lil' vid.s of it, in use, but they won't load on here " The uploaded file does not have an allowed extension. " ??? Pass??? @Regy53 ??
and won't flow enough oil anyway face shovel style was easier ... for running / loading it ... does a hell of a job
got 3 lil' vid.s of it, in use, but they won't load on here
" The uploaded file does not have an allowed extension. " ??? Pass??? @Regy53 ??
Regy53
I like cake
well the Lloyd went on .... without the SMP ..... bit tight with it apparently
View attachment 1289
face shovel style was easier ... for running / loading it ... does a hell of a job
got 3 lil' vid.s of it, in use, but they won't load on here
Videos don’t work sorry link to YouTube and post it will embed like a image does
V8Druid
do it as well as you can,but learn to do it better
cheers Ross .... see what i can do .. uploading to you tube takes forever
Grahams
Don't complain - suggest what's better
Looks a smart back body on the hilux. Any more details?
Regy53
I like cake
Videos are so varied and huge file sizes I never asked my guy why we can’t have them but I kind of already know the file sizes will be way to large
Footer block 1