Desert adventures

V8Druid

V8Druid

do it as well as you can,but learn to do it better
why's the dipper ram disconnected on that @Conor ? :unsure:....... just been delivered ??
 
Conor

Conor

Well-known member
A few more pictures of what we’ve been doing lately. Just finished some work in the new metro tunnel cutting and breaking out emergency exits. Glad I don’t have to go there everyday the climb down was a nightmare 😂 we also put a hammer on the little pc138, and been pleasantly surprised so far 🤞🏻 The cheap Chinese hammers performing well. It’s been breaking and loading slabs in a yard from a big cut and lift project in Abu Dhabi 9A8888AB-77C7-4C9E-9FBA-8BE3786AEFB8.jpegB8931047-D9C0-4A3B-9079-7F9039A2813D.jpeg4CC38F20-A06C-4B7D-AE18-1B006328DCAC.jpeg3AAA902B-B747-4D55-A7A3-9346B0C7FFC6.jpegAFF0D8C1-EACA-4174-AE8C-BA807FBD0534.jpeg
 
Conor

Conor

Well-known member
why's the dipper ram disconnected on that @Conor ? :unsure:....... just been delivered ??

There was cracks on the top of the boom Grah, they pulled the pin so the arm would fold right down to make it easy on the welder.... why they didn’t just do it in the lay down area where they were going doing the welding 🤷🏻‍♂️
 
Conor

Conor

Well-known member
Got the marina job finished out a few weeks ago, was a tough slog at the end but we got there
 

Attachments

  • 6855FCFE-53A5-43E4-9857-B93E637B7FEF.jpeg
    6855FCFE-53A5-43E4-9857-B93E637B7FEF.jpeg
    281.9 KB · Views: 426
  • CB21C464-FDA9-425D-816C-D46A997724C6.jpeg
    CB21C464-FDA9-425D-816C-D46A997724C6.jpeg
    189 KB · Views: 441
Conor

Conor

Well-known member
Well not so much plant work lately, cutting out 3 levels of a car park in a hospital in Abu Dhabi, some heavy beams 2.2m x .7 deep. Blocks are been taken to a lay down area nearby then broken and sent to landfill. Will be my last major project in the UAE for the foreseeable future anyway, moving home to Ireland next month so see what we can do there, getting married in early August so hectic few months aheadE9D22C51-544B-4F32-B343-CBBCDC45ED8D.jpeg3AFCB68B-DEB6-402A-9DF0-A9613401EC9D.jpeg454D2781-A437-4CC0-9EE4-5E57DE2E1BAB.jpeg80EFEF71-C095-4345-88C8-A4EAE76CB54C.jpeg1BB7909A-4980-483D-B642-802A2FA75520.jpeg
 
JD450A

JD450A

Feral as Fk 🐾
moving home to Ireland next month so see what we can do there, getting married in early August so hectic few months ahead

Congratulations mate... and at long last home to use the gear you've Amassed...... I can see it now, C.Wade, Plant Hire, Earthworks, Tarmacadam, Blockpaving and Pressure Washing...... Be abit like Dan Weston :ROFLMAO:
 
Conor

Conor

Well-known member
Congratulations mate... and at long last home to use the gear you've Amassed...... I can see it now, C.Wade, Plant Hire, Earthworks, Tarmacadam, Blockpaving and Pressure Washing...... Be abit like Dan Weston :ROFLMAO:
Cheers Rory, can throw demolition onto that list as well I’ve gotten good at breaking things 😂
 
Conor

Conor

Well-known member
Well having spent a slow week on lockdown, thought I’d stick a new post up on here. Not had a single bit of luck since moving home, and being honest if I knew what was ahead would have stayed where I was. Bought a site and part of the plan was to start building soon as we got home but it’s still not got going partly due to incompetent solicitors and other the dreaded banks/mortgage. Long story short had work lined up to go self employed but banks wouldn’t talk to us unless I had 6 months working for a company, so got a job as a site manager for a groundwork’s company working for a top developer, all going well until they went bust and i was 2 weeks short of mortgage approval, with banks now saying sorry you have to start again 🤷🏻‍♂️ So I lined up a new job with one of the top demo boys here, all good to go, cue the start of the corona pandemic and that came to a crashing halt. So I picked up some work on an 8 ton doing services on a new development which lasted a week and a half before we were forced into lockdown. Best part of it all I’m not entitled to any pandemic payments because I started a new job after the government announced them, should have stayed sat on my arse!! Anyway, the bad luck can’t keep going I hope 😂 and in the grand scheme of things, were a lot better off than most, just wished I had gone with my gut which was to plough on with the original plan. We have a baby girl due in June, so exciting times ahead let’s just hope she brings a change in fortune! Hope all you lads are staying safe and get through this pandemic!
 

Attachments

  • 20EE29D3-8896-4BEF-8153-1EB4FBBFC355.jpeg
    20EE29D3-8896-4BEF-8153-1EB4FBBFC355.jpeg
    325.2 KB · Views: 388
  • 05B4A941-40B7-4FBC-A728-B13EB5A5FA4B.jpeg
    05B4A941-40B7-4FBC-A728-B13EB5A5FA4B.jpeg
    385.8 KB · Views: 345
  • DD0CB223-C2FD-4DE8-A844-2ABF67FDE696.jpeg
    DD0CB223-C2FD-4DE8-A844-2ABF67FDE696.jpeg
    287.6 KB · Views: 365
  • E41C4BEC-6CC3-4B3D-AB0E-04EC843DBE3F.jpeg
    E41C4BEC-6CC3-4B3D-AB0E-04EC843DBE3F.jpeg
    340.5 KB · Views: 368
  • 9FA10746-753F-4001-89DF-C27118894101.jpeg
    9FA10746-753F-4001-89DF-C27118894101.jpeg
    329.7 KB · Views: 408
V8Druid

V8Druid

do it as well as you can,but learn to do it better
" if it wasn't for your bad luck you'd have no luck at all " ..... is the saying I think Boyo ... you're not having a great time ATM :(:( sounds like Mr Sod and his law is in full buggeration mode :mad:
 
JD450A

JD450A

Feral as Fk 🐾
Well having spent a slow week on lockdown, thought I’d stick a new post up on here. Not had a single bit of luck since moving home, and being honest if I knew what was ahead would have stayed where I was. Bought a site and part of the plan was to start building soon as we got home but it’s still not got going partly due to incompetent solicitors and other the dreaded banks/mortgage.

Have you not got the Jake and CX130 still to go and do a bit on the side?
 
Conor

Conor

Well-known member
Yeah Graham, definitely not having a great run of it , but could be a hell of a lot worse off given the current climate, and I’m sure we will get back on track eventually! If not can get back on a plane out of here!

Rory still have the case and 3cx also added a mint little kubota 008. Strongly thinking of chopping in the jake for a tidy 2.7 ton mini digger. Plenty of time to think about what to do over the next few weeks 😂 that’s my nephew in the picture, he’s more into mechanics than plant
 

Attachments

  • 7355ED72-5630-4798-97EA-031090AA9C33.jpeg
    7355ED72-5630-4798-97EA-031090AA9C33.jpeg
    242.6 KB · Views: 408
  • EFCFC623-1AF8-4F5D-980D-237D7012D8CB.jpeg
    EFCFC623-1AF8-4F5D-980D-237D7012D8CB.jpeg
    459.3 KB · Views: 459
hiluxman

hiluxman

Well-known member
Yeah Graham, definitely not having a great run of it , but could be a hell of a lot worse off given the current climate, and I’m sure we will get back on track eventually! If not can get back on a plane out of here!

Rory still have the case and 3cx also added a mint little kubota 008. Strongly thinking of chopping in the jake for a tidy 2.7 ton mini digger. Plenty of time to think about what to do over the next few weeks 😂 that’s my nephew in the picture, he’s more into mechanics than plant
That k008 looks a very tidy thing, most are beat to death now.
 
Conor

Conor

Well-known member
Yes it’s exceptionally clean, came from a good home and all totally original, got a little kubota breaker with it too which is like brand new. It was a case of right place and right time when that came along
 
Conor

Conor

Well-known member
Well I’m almost a week into lockdown 2.0 for construction here in Ireland and thought I may as well update the old thread. Been working with one of the top demo companies here since late may after the first lockdown ended and it’s been going great. Really enjoying the work (much the same as what I was doing in Dubai) and working for some really good people. Still struggling along with mortgages and the new build and all the rest of it due to covid but hopefully another few months will sort that all out. Few pictures for those looking. Just finished a city center demo of a 4 story + plantroom office block, took a month from the brokk starting to wrapping up which was fair going, and was a week into an 11 story project when second lockdown hit.
7DFADE9D-6F9F-4777-B4AE-7E7F339D902B.jpeg66E1AE88-03D5-475E-9DD4-5F0E55C44E10.jpeg2BC119D1-526E-4D83-9107-92614BC8DA65.jpeg0E8019A9-27AF-46D9-BD99-5C7F587939D5.jpegE444A06F-DD1D-4790-8797-B09810D88710.jpeg17426F97-7C22-4F6B-BD01-9217291CB430.jpeg778605F1-436F-4CEA-B066-847C1EE888F6.jpeg964ACB3D-D99F-4BF1-8172-9645F895BADF.jpeg500BB922-A995-4744-9E3C-71DA90AFC4C6.jpeg
 

Attachments

  • A931BED9-FA84-47BD-9FE5-44DA6E0184E9.jpeg
    A931BED9-FA84-47BD-9FE5-44DA6E0184E9.jpeg
    115.2 KB · Views: 300
Conor

Conor

Well-known member
Should really change the name of this thread or start a new one as I’m a long way from the desert now 😂

Recently back to work having sat at home since Jan 8th due to covid lockdown here in Ireland. Started on an old bowling alley and arcade which is being redeveloped into apartments..... some serious amounts of sh*t to take out of this building, punched a fair hole in it in two weeks and will be ready to start knocking the building mid next week, got the 954 high reach dropped off to site this morning.
 

Attachments

  • PHOTO-2021-04-24-16-48-42 4.jpg
    PHOTO-2021-04-24-16-48-42 4.jpg
    116.5 KB · Views: 273
  • PHOTO-2021-04-24-16-48-43.jpg
    PHOTO-2021-04-24-16-48-43.jpg
    133.8 KB · Views: 247
  • PHOTO-2021-04-24-16-48-43 2.jpg
    PHOTO-2021-04-24-16-48-43 2.jpg
    98.9 KB · Views: 275
  • PHOTO-2021-04-24-16-48-42.jpg
    PHOTO-2021-04-24-16-48-42.jpg
    127.8 KB · Views: 259
  • PHOTO-2021-04-24-16-48-42 2.jpg
    PHOTO-2021-04-24-16-48-42 2.jpg
    105.2 KB · Views: 272
  • PHOTO-2021-04-24-16-48-42 3.jpg
    PHOTO-2021-04-24-16-48-42 3.jpg
    108.4 KB · Views: 256
  • PHOTO-2021-04-24-16-48-43 5.jpg
    PHOTO-2021-04-24-16-48-43 5.jpg
    94.7 KB · Views: 271
  • PHOTO-2021-04-24-16-48-43 3.jpg
    PHOTO-2021-04-24-16-48-43 3.jpg
    95.3 KB · Views: 264
Gunners

Gunners

Well-known member
Should really change the name of this thread or start a new one as I’m a long way from the desert now 😂

Recently back to work having sat at home since Jan 8th due to covid lockdown here in Ireland. Started on an old bowling alley and arcade which is being redeveloped into apartments..... some serious amounts of sh*t to take out of this building, punched a fair hole in it in two weeks and will be ready to start knocking the building mid next week, got the 954 high reach dropped off to site this morning.
Please say you blagged an old bowing pin. Always fancied one for the workshop as a talking point
 
Top