Bobcat e10z tilt bucket

[MarkChap]

Hi everyone, I’ve bought a tilt bucket for my E10 from Rhinox. Great looking bucket but It only tilts to one side and won’t come back. The manual is telling my that the top auxiliary line is pressurised and the bottom one is for return oil flow. Does anyone have any advice how I can get it to work/ what needs to be done for it to work. Many thanks

 

[V8Druid]

Hi everyone, I’ve bought a tilt bucket for my E10 from Rhinox. Great looking bucket but It only tilts to one side and won’t come back. The manual is telling my that the top auxiliary line is pressurised and the bottom one is for return oil flow. Does anyone have any advice how I can get it to work/ what needs to be done for it to work. Many thanks

single acting aux lines ... cetop 3 would get you what you want on two buttons unless the service can be changed to double acting .... anyone?????

 

[Bri963]

You’re plumbed on to the breaker circuit, single direction flow. You need to see whether the actuating valve is a double acting that’s just using one port, like my Kub. If so you’ll be able to run a line from the blanked port of the valve, but will need to alter the pedal so it works both ways.

 

[Furniss]

Hi everyone, I’ve bought a tilt bucket for my E10 from Rhinox. Great looking bucket but It only tilts to one side and won’t come back. The manual is telling my that the top auxiliary line is pressurised and the bottom one is for return oil flow. Does anyone have any advice how I can get it to work/ what needs to be done for it to work. Many thanks

Or .... if you fit identical fittings both sides you could swop pipes over when you want to tilt it the other way

 

[Giles]

Don’t you just need to switch to double acting my Kubota have a valve, breaker single acting or double acting for auger tilt bucket

 

[Mick-the-fitter]

T off and tap the offset control!

 

[Furniss]

You see @Mick -the-fitter.... it isn't just you that's full of nuggets of wisdom

 

[Mick-the-fitter]

Most small exc’s have a valve, but like the tb210 it is a pain to change over

 

[GazCro]

Don’t you just need to switch to double acting my Kubota have a valve, breaker single acting or double acting for auger tilt bucket

I'd hope so or is it one of the optional extras that makes them seem cheap.

 

[Mick-the-fitter]

You see @Mick -the-fitter.... it isn't just you that's full of nuggets of wisdom

Good to know

 

[CPS]

Il check mine tomorrow but I'm pretty sure it has a change over valve

 

[Mick-the-fitter]

Don’t forget the stop bolt on the pedal!

 

[MarkChap]

Thanks everyone for the advice. The pedal does go both ways already. Could somebody possible post a photo or diagram where the double acting valve would be? I can’t find anything online about it.

 

[Mick-the-fitter]

Covers off, follow linkage, are there two hoses off the section?

 

[V8Druid]

Thanks everyone for the advice. The pedal does go both ways already. Could somebody possible post a photo or diagram where the double acting valve would be? I can’t find anything online about it.

what happens when you press it the 'wrong' way .. ?

 

[JD450A]

Following for the dawning realisation.

 

[hiluxman]

Just ring bobcat, they will tell you if it's got 2 way lines fitted or not.

Both mine have and there's no swap over valve. They are just 2 way and thats it.

 

[doobin]

Just ring bobcat, they will tell you if it's got 2 way lines fitted or not.

Both mine have and there's no swap over valve. They are just 2 way and thats it.

I was told that this was the standard UK spec.

 

[hiluxman]

I was told that this was the standard UK spec.

I think it generally is but they do seem to have some weird spec ones floating about. My 2016 e10 was ordered with demo kit, when it arrived it had every option possible. Bobcat just said that's the one we've allocated to you and that's how it got sent to them.

 

[doobin]

I think it generally is but they do seem to have some weird spec ones floating about. My 2016 e10 was ordered with demo kit, when it arrived it had every option possible. Bobcat just said that's the one we've allocated to you and that's how it got sent to them.

Yes, I ordered without demo kit but apparently it has it anyhow.