Mogmans creations 🤔

[Mogman]

So what was it like before. Was the engine knackered. Is everything else ok.

Sort of put a battery on it and it spun up so gave it 24v and it started but was breathing that heavy and you pull a lever a tin amount and it stalls the engine
tha dash all lights up but is missing the front window oh and it has a car seat fitted

 

[JD450A]

you know, you can keep it

 

[diggerjones]

I'm after a bigger digger paul if you think it will do a bit after you've tinkered with it and painted it with some shiny tish

 

[Quattromike]

Take the arm off and mount it as an extension to the duck

 

[pettsy]

Take the arm off and mount it as an extension to the duck

I’ve seen a new Holland digger with a telehandler arm fitted

 

[Mogman]

Dose anyone know where I can get a engine rebuild kit from going to pull it apart tomorrow think pistons and liners and a top end rebuild

 

[Mogman]

I'm after a bigger digger paul if you think it will do a bit after you've tinkered with it and painted it with some shiny tish

I’ll probably keep it if I ever get it going again

 

[V8Druid]

Dose anyone know where I can get a engine rebuild kit from going to pull it apart tomorrow think pistons and liners and a top end rebuild

Industrial engines Industrial Engines - New, Used & Reconditioned Engines. (industrialenginesuk.com)
[email protected]

 

[diggerjones]

Dose anyone know where I can get a engine rebuild kit from going to pull it apart tomorrow think pistons and liners and a top end rebuild

Thought you would have an engine somewhere that you could graft into it

 

[pettsy]

Maybe https://www.atwildeplantparts.co.uk ?

 

[GazCro]

Dose anyone know where I can get a engine rebuild kit from going to pull it apart tomorrow think pistons and liners and a top end rebuild

Dunno if yanmars have liners, I'm sure some don't.

 

[Shovelhands]

Dose anyone know where I can get a engine rebuild kit from going to pull it apart tomorrow think pistons and liners and a top end rebuild

L&S Engineers might be worth a call.

 

[Shovelhands]

Or....

Yanmar Engines & Parts | Small Diesel Engine Services Calne

Yanmar engines and parts: Small Engine Services in Calne are authorised dealers of genuine Yanmar engines and parts. We also supply non-genuine components.

yanmarspareparts.co.uk

 

[sjs5060]

Always worth asking lavins mog, Richie has been pretty on the ball several times already for me this year

 

[CPS]

Yanmar parts are horrendous prices

 

[Monkeybusiness]

I can’t believe you are considering paying for parts to fix something, and aren’t going to shoehorn something the same/better back in that turned up in a load of scrap!
I think I can speak for many members on here when I say it is disappointing and rather deflating to see you approach this issue in such a sensible way Paul. I think you need to reconsider how you tackle this issue, and potentially close this thread if you insist upon following this particular path.

 

[Agridave]

thats alot of work, but to change the starter on a cat d4c you need a gas axe, sockets a bar, sledge hammer and a skidsteer. then tap the hole afterwards. you melt out the old starter with the gas axe.

 

[Lancs Lad]

thats alot of work, but to change the starter on a cat d4c you need a gas axe, sockets a bar, sledge hammer and a skidsteer. then tap the hole afterwards. you melt out the old starter with the gas axe.

Haha saw that...one of those progressive situations...finally it's like fk u out with bottles

 

[Left hooker]

Similar engine to the ones fitted in hitachi 48u and 55u guess you could shoehorn one of those in

 

[Mogman]

The smallest engine I have is this

ive run a tape measure around both engines and its a bit big (by several inche) plus its over twice the power at 58KW
but thinking about it now I have another engine that I forgot about will have to investigate in the morning