D
DaveDCB
Well-known member
Ohhhh go on who’s thatmuch like another one who used to spend it like water on his toys
Furniss
Well-known member
Don't know who your talking aboutmuch like another one who used to spend it like water on his toys
Unless it was mostly spent being the Carlos fandango of the digger world ?
Last edited:
Simon edwards
Well-known member
Nothing wrong with hillbillies mate! As long as their gummy kids ain’t playing banjo at the gate, get’s proper weird thenNo true, but also asking and defending 250 a day is a joke with a 70k machine and tractor trailer to move it.
We aren’t all hillbillies lol
V8Druid
do it as well as you can,but learn to do it better
his way or no way .... the gospel according to E*YDon't know who your talking about
Unless it was mostly spent being the Carlos fandango of the digger world ?
Simon edwards
Well-known member
Backblade?
S
Stroppymonkey
Well-known member
Well…. Time will tell as it it isn’t going to happen for a month, but 2 weeks after me looking at it.. I think we have struck a deal. About £400 more than what I wanted and about £2600 less than he wanted. Will mean I will be selling the Jungheinrich counter balance for sure.
CPS
Well-known member
Many question is. Could all those set ups be that bad? I dont think so
kabin man
Well-known member
https://www.facebook.com/share/1C3bH73XBm/
Don't know if it's value but looks like a nice surface to work on..
In Tring,near Aylesbury. Prob too far for the druid master..
Don't know if it's value but looks like a nice surface to work on..
In Tring,near Aylesbury. Prob too far for the druid master..
V8Druid
do it as well as you can,but learn to do it better
sadly correct - and a tad pricey for a 33" width -- 4ft'd be a different matter
V8Druid
do it as well as you can,but learn to do it better
just had a look at that and it's an old milling machine table ... can see the guide ways under it (and there'll be drive bosses under there too) .... must've been a fair machine - but very old
Facebook
www.facebook.com
same seller has this too ... pity it's not a bigger capacity .. 6m lift is a hell of a mast - has the valve chest with it too
www.facebook.com
S
Stroppymonkey
Well-known member
Might look better with a wash. Should think it will sell quick at that money. My feed keeps trying to sell me Telehandlers now!
Giles
Well-known member
Someone had all the toys normally avoid bpi auctions but only! 10% buyers premium
@Monkeybusiness might be of interest
www.bpiauctions.com
@Monkeybusiness might be of interest
Current Online Auctions | BPI
Our active market sectors are second to none in the auction industry. We have a wide range of services which are proven and can be tailored to meet your
www.bpiauctions.com
Attachments
Last edited:
K
kato512
Well-known member
I wonder what's the story with the unregistered iveco?Someone had all the toys morally avoid bpi auctions but only! 10% buyers premium
@Monkeybusiness might be of interest
Current Online Auctions | BPI
Our active market sectors are second to none in the auction industry. We have a wide range of services which are proven and can be tailored to meet your
V8Druid
do it as well as you can,but learn to do it better
this is unusual ...... no fixed reserve -BUT!!
Have seen a few of those machine tools elsewhere, I'm sure - deffo the Colchester 2000 lathe, radial drill, wood lathe, Geka and lots 43 to 48 ... so interesting that they state this " All lots in this auction are owned from new " -- the radial drill is mid/late '60s - the Fobco7-8 early '70s
" All Winning Bids are Subject to Vendor Approval "
Have seen a few of those machine tools elsewhere, I'm sure - deffo the Colchester 2000 lathe, radial drill, wood lathe, Geka and lots 43 to 48 ... so interesting that they state this " All lots in this auction are owned from new " -- the radial drill is mid/late '60s - the Fobco7-8 early '70s
Giles
Well-known member
Think it’ll be top prices or stuff hung onto, “I know what I have” looks like a well setup medium outfit with all the new kits they had, fabrication side and access kit. Machines have new retail cost listed and lots of attachments etc, looks like they shared an I dig across the 7,9 and 15 ton.
Few great setups ready to go with all the toys
New barriers and track mats etc
That iveco is nice but again more fabrication being long wheelbase flat bed not tipper.
Stuff appears to be on a nice Newley landscaped house and yard setup, even brand new forklift etc. wasn’t a make do a mend type like some of us buying older kit. Wonder what the finance status is on some of the kit?
Any of of us on here out hull way ? know who they where?
Few great setups ready to go with all the toys
New barriers and track mats etc
That iveco is nice but again more fabrication being long wheelbase flat bed not tipper.
Stuff appears to be on a nice Newley landscaped house and yard setup, even brand new forklift etc. wasn’t a make do a mend type like some of us buying older kit. Wonder what the finance status is on some of the kit?
Any of of us on here out hull way ? know who they where?
6
6feetdown
Well-known member
Definitely some nice kit on there
hiluxman
Well-known member
S
Stroppymonkey
Well-known member
The Nissan double cab van looked interesting, till you see the passenger seat and engine cover are on then back seats!
S
Stroppymonkey
Well-known member
Doesn’t seem over priced
S
Stroppymonkey
Well-known member
Footer block 1