D
DaveDCB
Well-known member
That trailer costs more than my tractor did 
Lancs Lad
Well-known member
They have some other nice kit....£££ heard some interesting rumours about that lot
Giles
Well-known member
Do tell or pm lolThey have some other nice kit....£££ heard some interesting rumours about that lot
The Facebook one different person to the eBay one to be clear but wanted to see the retail on them
Lancs Lad
Well-known member
Pm sent...Do tell or pm lol
The Facebook one different person to the eBay one to be clear but wanted to see the retail on them
pettsy
Well-known member
Still limited to just over 18t if running agriculturally, but how many do 
D
DaveDCB
Well-known member
Field across from us had new contractors, all had triple axle silage trailers.. 7,500kg empty weight, 44m2 capacity.. deffo way more than 10ton of grass in them!!!Still limited to just over 18t if running agriculturally, but how many do
S
Stroppymonkey
Well-known member
Local AG contractor used to tow his 15ton excavator round at 5.30am. I wonder why
D
DaveDCB
Well-known member
saves a traffic jam I supposeLocal AG contractor used to tow his 15ton excavator round at 5.30am. I wonder why
M
Monkeybusiness
Well-known member
You can tow as much weight as you like across fields and down farm tracks though, it’s only if carrying it loaded on the road that the weight limit applies.Still limited to just over 18t if running agriculturally, but how many do
6
6feetdown
Well-known member
Umm do they transport other stuff too!They have some other nice kit....£££ heard some interesting rumours about that lot
D
DaveDCB
Well-known member
Ahh good the local roads resemble farm tracks so it’s all above board
pettsy
Well-known member
T
topkit
Well-known member
Cheffins auction this Saturday looks to be good, One for JD450 although this one is only a JD350 looks like the track adjuster could do with some grease too !! There are some nice pieces of kit up for auction.
S
Stroppymonkey
Well-known member
Would love a week on a decent one. Could have done with one rather than the Wheel Digger on the shed base, but pretty sure none about on self drive.
On a different note - this one just popped up local. With thumb and set of buckets on steel tracks with a trailer... Would sell at that price I would think.
On a different note - this one just popped up local. With thumb and set of buckets on steel tracks with a trailer... Would sell at that price I would think.
Last edited:
T
topkit
Well-known member
Shame thats not closer to me I would be interested in that.
V8Druid
do it as well as you can,but learn to do it better
S
Stroppymonkey
Well-known member
Bideford... that's the one. They must have updated listing.this it ? it's '95 in this ad ???
www.facebook.com
V8Druid
do it as well as you can,but learn to do it better
Gavells whom i often put links up to, reasonably local to me, must have some one new writing their catalogue entries
was looking at this earlier and thought -- hello .... that's mis-representation !!! bigtime!!
sent 'em an email referencing the error .. no response as yet
huge difference on the value of that - especially as that is a mild steel capacity and this mob've been using it on stainless which'd've put it down to circa 2.5mm in 308 S/S
probably worth 30% of what a 10mm would make
also seeing more errors elsewhere in some of their descriptions -- the FLT is a 2 tonner not 1250kg, as stated, with a 4500mm lift not 1400mm as stated the fork spreader will reduce the usable cap, but the FLT is still a 2 tonner .. hasn't had a 6 monthly since Aug '20 either with two advisories, one safety critical
the racking system lot 11 is some fancy racking set up ... would've loved tha for my sheet stocks
lots 18b & c will be worth keeping an eye on hi-cubes too
@Quattromike might want to keep an eye on all the stainless stock
www.gavelauctionsonline.com
usual story too ..... multi thousands spent in the offices - shop floor gets to 'make do', even though they're responsible for making 'the wealth'
was looking at this earlier and thought -- hello .... that's mis-representation !!! bigtime!!
sent 'em an email referencing the error .. no response as yet
huge difference on the value of that - especially as that is a mild steel capacity and this mob've been using it on stainless which'd've put it down to circa 2.5mm in 308 S/S
probably worth 30% of what a 10mm would make
also seeing more errors elsewhere in some of their descriptions -- the FLT is a 2 tonner not 1250kg, as stated, with a 4500mm lift not 1400mm as stated
the fork spreader will reduce the usable cap, but the FLT is still a 2 tonner .. hasn't had a 6 monthly since Aug '20 either with two advisories, one safety critical the racking system lot 11 is some fancy racking set up ... would've loved tha for my sheet stocks
lots 18b & c will be worth keeping an eye on
hi-cubes too@Quattromike might want to keep an eye on all the stainless stock
Gavel Auctioneers & Valuers | Online Auction - The Assets of an Engineering Facility
usual story too ..... multi thousands spent in the offices - shop floor gets to 'make do'
, even though they're responsible for making 'the wealth'
Last edited:
Quattromike
Well member-known
I know, pool tables and dish washers. Are they really trying to auction off a pallet with three siding boardsGavells whom i often put links up to, reasonably local to me, must have some one new writing their catalogue entries
was looking at this earlier and thought -- hello .... that's mis-representation !!! bigtime!!
sent 'em an email referencing the error .. no response as yet
huge difference on the value of that - especially as that is a mild steel capacity and this mob've been using it on stainless which'd've put it down to circa 2.5mm in 308 S/S
probably worth 30% of what a 10mm would make
View attachment 61855
also seeing more errors elsewhere in some of their descriptions -- the FLT is a 2 tonner not 1250kg, as stated, with a 4500mm lift not 1400mm as stated
the racking system lot 11 is some fancy racking set up ... would've loved tha for my sheet stocks
lots 18b & c will be worth keeping an eye on
@Quattromike might want to keep an eye on all the stainless stock
Gavel Auctioneers & Valuers | Online Auction - The Assets of an Engineering Facility
usual story too ..... multi thousands spent in the offices - shop floor gets to 'make do'
the amount of them I've chucked in the skip I could of been a multi pound-inaire
V8Druid
do it as well as you can,but learn to do it better
and they wonder why they've gone tits upI know, pool tables and dish washers. Are they really trying to auction off a pallet with three siding boards
Footer block 1