6
6feetdown
Well-known member
Messaged see if she replies
V8Druid
do it as well as you can,but learn to do it better
's a major problem with MP... many of the ****ers don't respond to their messaging ...... few things gone, i'd have bought..... if they'd replied
Furniss
Well-known member
You're a grumpy bugger @V8Druid's a major problem with MP... many of the ****ers don't respond to their messaging ...... few things gone, i'd have bought..... if they'd replied
hiluxman
Well-known member
I put an old disco3 on mp just after Xmas and we counted 73 messages in 24 hours. Ended up at 154 messages at point of sale. Vast majority were the usual 'is it still available' (they ought to stop that generic reply), others were questions that was already in the advert. Few wanted to do px. Then there was probably 3 genuine ones left.'s a major problem with MP... many of the ****ers don't respond to their messaging ...... few things gone, i'd have bought..... if they'd replied
Bloody hard work to find a buyer...May have missed some within the daft messages But the time to read them and the usually '???' messages if you've not replied within 10mins, they must think I've no work on and just sat on my phone all day.
Thankfully the genuine one, did turn up as promised, had a look round and said yeah that's as described and here your asking price.
V8Druid
do it as well as you can,but learn to do it better
nah .. just get PO-ed with folk advertising and then not responding after two or three days ... don't expect instant, but that's a reasonable time to have to waitYou're a grumpy bugger @V8Druid
.. to be honest I really DGAF about most odds an' ends, but there're a few good buys I'd liked to have had
V8Druid
do it as well as you can,but learn to do it better
Need grd mats but want to know if these are any good as Facebook/ ebay seller
www.facebook.com
Se connecter à Facebook
Connectez-vous à Facebook pour commencer à partager et communiquer avec vos amis, votre famille et les personnes que vous connaissez.
www.facebook.com
William127
Well-known member
Found a petrol flail mower on marketplace, spot on for a project I'm thinking of, listed for a quid ffs. Messaged asking what he wants for it, no response for 2 days, Messaged again asking if it's still available, another 2 days, still nothing's a major problem with MP... many of the ****ers don't respond to their messaging ...... few things gone, i'd have bought..... if they'd replied
It's not a 5 quid bit of tat, why advertise it if you can't be bothered to sell!
V8Druid
do it as well as you can,but learn to do it better
exactly my pointFound a petrol flail mower on marketplace, spot on for a project I'm thinking of, listed for a quid ffs. Messaged asking what he wants for it, no response for 2 days, Messaged again asking if it's still available, another 2 days, still nothing
It's not a 5 quid bit of tat, why advertise it if you can't be bothered to sell!
6
6feetdown
Well-known member
Had a reply waiting for an answer
6
6feetdown
Well-known member
V8Druid
do it as well as you can,but learn to do it better
had a trip to Newtown then
wish I'd known you were going
6
6feetdown
Well-known member
What were you after?had a trip to Newtown then
wish I'd known you were going
Tbf only decided about 12.30 as merchants hadn't dropped all our materials off Tuesday
so had an afternoon spare
V8Druid
do it as well as you can,but learn to do it better
No Prob.s boyo ... would've had a few, but summat'll come up local ... in no rushWhat were you after?
Tbf only decided about 12.30 as merchants hadn't dropped all our materials off Tuesday
6
6feetdown
Well-known member
Sods law not sure if 1 had 10 but dropped out would have dropped them as came through Aber on way homeNo Prob.s boyo ... would've had a few, but summat'll come up local ... in no rush
6
6feetdown
Well-known member
Anyone know where I can order 4 to 6 of these conveyor belt plate clips. 2 of the mats are spilt on the ends think these would be a good way of preserving them.
engineeringstores.co.uk
Mato MS 140 Belt Screw System Conveyor Belt Fasteners
Mato MS 140 Belt Screw System Conveyor Belt Fasteners The Mato Screw System MS 140 is used for belt splicing and rip repairs. It is easy to install. They offer a good compression into the belt, and fit to variations in the belt thickness. Installation Recommendations Belt Thickness: 5mm -...
engineeringstores.co.uk
V8Druid
do it as well as you can,but learn to do it better
give these ppl a try?Anyone know where I can order 4 to 6 of these conveyor belt plate clips. 2 of the mats are spilt on the ends think these would be a good way of preserving them.
Mato MS 140 Belt Screw System Conveyor Belt Fasteners
Mato MS 140 Belt Screw System Conveyor Belt Fasteners The Mato Screw System MS 140 is used for belt splicing and rip repairs. It is easy to install. They offer a good compression into the belt, and fit to variations in the belt thickness. Installation Recommendations Belt Thickness: 5mm -...
Conveyor belt supply and fitting service - vulcanising - clipping - repairs | eBay
Onsite Conveyor Belt Fitting Service. On-site repairs. Fitting of your own belts. Distance no object. Call Lee for a free quote.
www.ebay.co.uk
or these have come up in a search too
Fastners conveyor belt | eBay
Solid Plate Type Conveyor Belt Fasteners. Conveyor Belt Fasteners Made From Cold Roll Carbon Tempered Steel. Total Quantity : 5 Piece.
www.ebay.co.uk
V8Druid
do it as well as you can,but learn to do it better
also these
'bout the only decent pic I can find
and how they're 'sposed to be used
'bout the only decent pic I can find
and how they're 'sposed to be used
6
6feetdown
Well-known member
Yeah there are a few online doing buckets of 100 starting about 120 i was hoping to pay about £20also these
'bout the only decent pic I can find
View attachment 57580
and how they're 'sposed to be used
Footer block 1