Mogmans creations 🤔

[V8Druid]

Yes of course I have 3 phase 100amp per leg too
i will need a nice switch box and remote switching too as going to put a key on the out side of the door

I might have both to suit you ... will have a look shortly .... pretty confident on the key switch front and 90% on the up/down panel too .. could always stick 'em on Evri for you

 

[DaveDCB]

They are the cheap part of the setup

Three Phase Control Panel VERSUS I20 - C Prox Ltd Quantek

Three Phase Control | 3 phase controller | Three-phase motor control panel | Door open/closed status | JCM TECH | Roller shutter control

quantek.co.uk

 

[Mogman]

I might have both to suit you ... will have a look shortly .... pretty confident on the key switch front and 90% on the up/down panel too .. could always stick 'em on Evri for you

I have the key switch and it matches the other locks
Just need a box with three buttons on up down and stop
If you have anything I’ll be interested

 

[V8Druid]

I have the key switch and it matches the other locks
Just need a box with three buttons on up down and stop
If you have anything I’ll be interested

meant to look today Mog, but Pam and the day overtook me ... will have a shufty tomorrow ... If I have what I think I do, I know where it/they'll be .. think I have two

 

[Mogman]

Managed to lift the big bit on today

Then did a test load on the hoist

Couldn’t get it all in the picture but that on the end of the hook is 950kgs Block of steel at full reach just over 16 meters

 

[V8Druid]

Managed to lift the big bit on today
View attachment 56060
Then did a test load on the hoist
View attachment 56062
Couldn’t get it all in the picture but that on the end of the hook is 950kgs Block of steel at full reach just over 16 meters

did I miss the tele bits getting a coat ? ... winch'll make that for you Paul

 

[Mogman]

I forget that picture

in the fore ground is the extension I made along with the nuts that hold it together and a funky socket that I had to convert

 

[DaveDCB]

Looking good when I drove past today, is it finished now?
… also wear your glasses in the scrap yard, you drove straight past me whaling my arms at you, not a clue!

 

[Mogman]

Looking good when I drove past today, is it finished now?
… also wear your glasses in the scrap yard, you drove straight past me whaling my arms at you, not a clue!

not quite got a bit of touching up where the lifting slings rubbed it

 

[DaveDCB]

Blame the slinger…..

 

[V8Druid]

I have the key switch and it matches the other locks
Just need a box with three buttons on up down and stop
If you have anything I’ll be interested

searched high and low today Paul ... I can see in my mind's eye, exactly what I'm looking for - green box with up/down/stop buttons about 10" x 8" x 6" .. but guessing I slung them ..... can't find the damned things anywhere - did find a load of 16/32A 5 pin wall sockets and isolator switches I'd forgotten I'd kept though .. been buying the bloody things
could make a box up mog with a pair of contactors and three buttons ... only have to reverse two legs of the phases

meant to look today Mog, but Pam and the day overtook me ... will have a shufty tomorrow ... If I have what I think I do, I know where it/they'll be .. think I have two

 

[Lancs Lad]

Was wondering wtf was on the back of a trailer tonight as I headed south M6 S/B just before forton services.
Got to the cab...our very own Mog
Gave you a little indicator wink @Mogman
Was in wife's motor making headway

 

[DaveDCB]

Was wondering wtf was on the back of a trailer tonight as I headed south M6 S/B just before forton services.
Got to the cab...our very own Mog
Gave you a little indicator wink @Mogman
Was in wife's motor making headway

Your meant to give him full horn and fingers!!!

 

[Lancs Lad]

Your meant to give him full horn and fingers!!!

That would have confused her even more

 

[Mogman]

Was wondering wtf was on the back of a trailer tonight as I headed south M6 S/B just before forton services.
Got to the cab...our very own Mog
Gave you a little indicator wink @Mogman
Was in wife's motor making headway

Yea on my way back from Glasgow
Did it in my 4 1/2

Was just the empty pallets/stillages taking them back to Cambridge on Thursday and collecting another load back to my yard for onward delivery to Sheffield

 

[Lancs Lad]

Yea on my way back from Glasgow
Did it in my 4 1/2

Was just the empty pallets/stillages taking them back to Cambridge on Thursday and collecting another load back to my yard for onward delivery to Sheffield

Better day yesterday than today

 

[Mogman]

Well a mogman creation let me down big style
Working in the reed bed and got a whiff of burning plastic stuck my head out of the door to find a load of smoke coming from under the bonnet
Slewed it straight with the tracks and shut it down jumped out to find the positive wire to the starter glowing red and dripping plastic insulation on the floor
Managed to find a bucket to get some water to where it’s needed and put it out and pulled the battery leads off took a few panels off and the start motor has melted to end off where the wires connect

So a recovery job to get it out of a 3 meter deep bed of gravel


Up on the bank for future Mogman to look at

 

[DaveDCB]

If you need a replacement machine and screwdriver I’m available

 

[V8Druid]

Well a mogman creation let me down big style
Working in the reed bed and got a whiff of burning plastic stuck my head out of the door to find a load of smoke coming from under the bonnet
Slewed it straight with the tracks and shut it down jumped out to find the positive wire to the starter glowing red and dripping plastic insulation on the floor
Managed to find a bucket to get some water to where it’s needed and put it out and pulled the battery leads off took a few panels off and the start motor has melted to end off where the wires connect

So a recovery job to get it out of a 3 meter deep bed of gravel
View attachment 57410
View attachment 57409
Up on the bank for future Mogman to look at

very frustrating .... at least you saved the Mogatsu, 'fore it went up in smoke ..... THAT would've been a total bummer

 

[Monkeybusiness]

Well a mogman creation let me down big style
Working in the reed bed and got a whiff of burning plastic stuck my head out of the door to find a load of smoke coming from under the bonnet
Slewed it straight with the tracks and shut it down jumped out to find the positive wire to the starter glowing red and dripping plastic insulation on the floor
Managed to find a bucket to get some water to where it’s needed and put it out and pulled the battery leads off took a few panels off and the start motor has melted to end off where the wires connect

So a recovery job to get it out of a 3 meter deep bed of gravel
View attachment 57410
View attachment 57409
Up on the bank for future Mogman to look at

Nooooo!!! That’s my favourite digger in the world!