The 'Today's Job' thread

C

Cal919

Well-known member
Had proper crane on site this week for first half of steel install. Been using the roto to do the block and beam. Been handling itself pretty well. Not sure id want a standard tele around that size anymore so useful having the slew. Just need to batter hire company down on price a bit. Also block and beam on the first floor is a nightmare, always use hollow core planks normally cant see the benefit at all other than slightly better on acoustics.
 

Attachments

  • IMG_9512.jpeg
    IMG_9512.jpeg
    367.1 KB · Views: 173
  • IMG_9527.jpeg
    IMG_9527.jpeg
    332.3 KB · Views: 139
  • IMG_9519.jpeg
    IMG_9519.jpeg
    326 KB · Views: 131
  • IMG_9518.jpeg
    IMG_9518.jpeg
    253.2 KB · Views: 113
  • IMG_9513.jpeg
    IMG_9513.jpeg
    271.1 KB · Views: 119
  • IMG_9510.jpeg
    IMG_9510.jpeg
    284.8 KB · Views: 121
  • IMG_9511.jpeg
    IMG_9511.jpeg
    277.9 KB · Views: 125
  • IMG_9526.jpeg
    IMG_9526.jpeg
    288.1 KB · Views: 121
  • IMG_9525.jpeg
    IMG_9525.jpeg
    301.7 KB · Views: 135
  • IMG_9528.jpeg
    IMG_9528.jpeg
    295.4 KB · Views: 142
  • IMG_9517.jpeg
    IMG_9517.jpeg
    360.7 KB · Views: 141
  • IMG_9532.jpeg
    IMG_9532.jpeg
    312.9 KB · Views: 126
  • IMG_9535.jpeg
    IMG_9535.jpeg
    368.6 KB · Views: 119
  • IMG_9534.jpeg
    IMG_9534.jpeg
    378.7 KB · Views: 140
S

Smiffy

Well-known member
How was the sany? We use CW for most of our hire and drivers keep telling me alot of their kit is going to sany now.

It's actually pretty nice and the cab feels decent, far more comfy than the previous week's Hitachi. Was on a breaker so nice having it on joystick not foot pedal. Grades nicely. Blade lever is in a stupid place. No immobilizer as standard and cwp don't fit them which I don't think is great. It is slightly Noddy which is surprising as it isn't a proper zero swing, and dropping the blade doesn't help like usually does
Only thing it does and it might be just this particular machine is when grading if you pull the dipper on and push it away from you without a slight pause it judders, enough to make me feel sea sick. Slight change of driving style sorts it but forget every now and then.
I don't think you could complain atall if you where being paid to drive it but I don't think it's an owner op machine.

Oh and the slew is really really imprecise. It didn't matter for what I was doing but would really annoy me digging footings or trenches and I think would make a tilty on it unfeasible
 
JerryRtilt

JerryRtilt

Well-known member
Had proper crane on site this week for first half of steel install. Been using the roto to do the block and beam. Been handling itself pretty well. Not sure id want a standard tele around that size anymore so useful having the slew. Just need to batter hire company down on price a bit. Also block and beam on the first floor is a nightmare, always use hollow core planks normally cant see the benefit at all other than slightly better on acoustics.
Only benefit of b/b on first floor is you can chop and change it around if someone has cocked up:unsure: nice to see a decent crash deck in place(y)
 
C

Cal919

Well-known member
Only benefit of b/b on first floor is you can chop and change it around if someone has cocked up:unsure: nice to see a decent crash deck in place(y)
was a bit sceptical of crash deck at first as its all plastic but once its up its solid. Another issue with block and beam setting all that up. Hollow core floors can just use airbags.
 

Attachments

  • IMG_9524.jpeg
    IMG_9524.jpeg
    265.5 KB · Views: 144
  • IMG_9523.jpeg
    IMG_9523.jpeg
    311 KB · Views: 131
Last edited:
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Had proper crane on site this week for first half of steel install. Been using the roto to do the block and beam. Been handling itself pretty well. Not sure id want a standard tele around that size anymore so useful having the slew. Just need to batter hire company down on price a bit. Also block and beam on the first floor is a nightmare, always use hollow core planks normally cant see the benefit at all other than slightly better on acoustics.
my favourite Liebherr ..
an LTC 1045-3.1 or the LTC 1050-3.1 (y):giggle:

 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Sites I go on use alot of plastic trad decking now bit of time setting up but brickies like using it . I may be totally wrong but an you still use air bags?
put a first floor beam set in with Russ about 2 years ago and that was all air bag-ed ... (Oct. '21)
WP_20211014_11_54_41_Pro.jpg
 
C

Cal919

Well-known member
Sites I go on use alot of plastic trad decking now bit of time setting up but brickies like using it . I may be totally wrong but an you still use air bags?
Dont think the floor installers would use them if they were not allowed. That being said we haven’t had them on site for a couple of years now so things may have changed. I imagine alot of it is on a site by site basis. Photos last time we used april 2020
 

Attachments

  • IMG_4346.jpeg
    IMG_4346.jpeg
    181.8 KB · Views: 121
  • IMG_4345.jpeg
    IMG_4345.jpeg
    166.8 KB · Views: 112
CPS

CPS

Well-known member
Delivered this little package today, JCB Hydradig that we supplied the attachments for. Rototilt R3 with gripper, Nordic style grading bucket, forks 300mm trench bucket and a Hurricane Utility bucket. Mounted on the factory fitted skidsteer headstock.
Love this little set-up 🤩
20230814_135056.jpg
20230814_135105.jpg
20230814_135400.jpg
 
Top