OOPS

[Shovelhands]

Hitachi men, pure fukin wild

 

[bobthebuilder]

Yeah bs Wales online again

havnt been gwent for 30 odd years ?

 

[Left hooker]

Hitachi men, pure fukin wild

Don't know what you mean

 

[V8Druid]

Don't know what you mean

View attachment 40593

that's 'brave' ...... remember Rob Taylor telling me a long time ago , if you'm digging deep and stood at the edge, ALWAYS be pointing in the right direction to back away .. IN A HURRY !!!!

 

[DaveDCB]

WTF was he thinking going in there FFS ???

https://www.facebook.com/video.php?v=448398510070978

He’s just made it hard work, should have slewed around and pulled himself at the same time, rather than simply pushing his blade down into the muck even more!

 

[V8Druid]

He’s just made it hard work, should have slewed around and pulled himself at the same time, rather than simply pushing his blade down into the muck even more!

pretty sure his blade was up as far as it'd go ..... that way round to lift the other end out of the tish and push ...... his mates were giving it plenty of pulling

 

[DaveDCB]

pretty sure his blade was up as far as it'd go ..... that way round to lift the other end out of the tish and push ...... his mates were giving it plenty of pulling

Seemed to look like he was just lifting himself up more than pushing

 

[6feetdown]

if he was coming from this direction he's either coming from Caparro Tubes, Tafarnaubach IE in Tredegar, or Rodelle Chimneys in Brecon, which'd be my best guess looking at the attached channel on the side of it
Taking the piss that overhang is ..... "elastic tape officer, only measured 10ft, when I looked at it ... and it's marked "

Passed it yesterday still parked up on the roundabout

 

[pettsy]

Halil Doğan on TikTok

Kaza#göçük#istanbul arel üniversitesi

vm.tiktok.com

 

[Jimbo69]

 

[Lancs Lad]

Complex recovery continuing one week on from Carlisle train derailment

Engineers are continuing a complex operation to recover several freight wagons which derailed a week ago in Carlisle.

www.networkrailmediacentre.co.uk

looks like a decent crane arriving soon..

 

[V8Druid]

View attachment 40813

I'd guess he tried to raise the boom without the gantry mast tensioned to support the load of the fly ... in fact, no sign of a mast even rigged TBH .. 's a big machine - has Superlift rigged

 

[craig]

I'd guess he tried to raise the boom without the gantry mast tensioned to support the load of the fly ... in fact, no sign of a mast even rigged TBH .. 's a big machine - has Superlift rigged

Or being Chinese, they forgot the QC the day it was made, and they used marshmallow steel

 

[Jimbo69]

Or being Chinese, they forgot the QC the day it was made, and they used marshmallow steel

That one was maybe supposed to go for export

 

[Bri963]

Or being Chinese, they forgot the QC the day it was made, and they used marshmallow steel

Doesn’t look very substantial where it sheared

 

[V8Druid]

Doesn’t look very substantial where it sheared

not for what the idiot in the seat was trying to hang off it Bri ..... operator error - end of

 

[Bri963]

not for what the idiot in the seat was trying to hang off it Bri ..... operator error - end of

Not the breakage I’d have expected for an overload, Gra. More usual for the flyjib to fold up?

 

[V8Druid]

Not the breakage I’d have expected for an overload, Gra. More usual for the flyjib to fold up?

not yer ordinary fly though Bri .... the root of that is 3.4t, then add on, looking at the angle in the pic, maybe 40-50ft more at 'praps another 15-20+t, plus cat head -- without a gantry mast supporting it, it is asking far too much of the main boom's cat head construction to cope with that loading .... even pinned on as a straight tip extension it would need the support of a mast, by nature of its very size and weight

appreciate these pix are luffing fly jibs, but that root will have the facility to fit a mast for a straight 'pin on' assembly - just can't find a pic

 

[Bri963]

not yer ordinary fly though Bri .... the root of that is 3.4t, then add on, looking at the angle in the pic, maybe 40-50ft more at 'praps another 15-20+t, plus cat head -- without a gantry mast supporting it, it is asking far too much of the main boom's cat head construction to cope with that loading .... even pinned on as a straight tip extension it would need the support of a mast, by nature of its very size and weight
View attachment 40837 View attachment 40838 appreciate these pix are luffing fly jibs, but that root will have the facility to fit a mast for a straight 'pin on' assembly - just can't find a pic

I see where you’re coming from now, Gra. Didn’t have much of a chance really. Blowing up the picture, it looks like it’s ripped right round edge of the HAZ rather than on the weld.

 

[V8Druid]

https://twitter.com/i/web/status/1587470420420206603