Mulholland plant hire (northern Ireland)

[Big Jordy]

Jaysus James dangerous man to be going to Cowans.. Your missus will never let you out again.. in fairness the yard in Mallusk is a temptation every time I drive past is your wee old machine up at Mallusk?

Jordan

 

[JimboCX]

Jaysus James dangerous man to be going to Cowans.. Your missus will never let you out again.. in fairness the yard in Mallusk is a temptation every time I drive past is your wee old machine up at Mallusk?

Jordan

Lol I’m band from mallusk even after getting her a new coat.. new wagons came out of maydown this time. It’s a big new place only opened a few months. It’s some set up there. A lot of stuff in it aswell. No we machine is still here. Will Probly sell her straight in the next few weeks when it finished up on the job it’s at. U interested?? Great wee machine

 

[JimboCX]

Lol I’m band from mallusk even after getting her a new coat.. new wagons came out of maydown this time. It’s a big new place only opened a few months. It’s some set up there. A lot of stuff in it aswell. No we machine is still here. Will Probly sell her straight in the next few weeks when it finished up on the job it’s at. U interested?? Great wee machine

 

[Big Jordy]

Lol I’m band from mallusk even after getting her a new coat.. new wagons came out of maydown this time. It’s a big new place only opened a few months. It’s some set up there. A lot of stuff in it aswell. No we machine is still here. Will Probly sell her straight in the next few weeks when it finished up on the job it’s at. U interested?? Great wee machine

I’d be interested very much but if I landed back at the house with it on the trailer I’d be deballed and put in wey the dogs..
tidy looking wee machine

Jordan

 

[Vinpetrol]

I think you could auction it on here Jim !

 

[JimboCX]

I’d be interested very much but if I landed back at the house with it on the trailer I’d be deballed and put in wey the dogs..
tidy looking wee machine

Jordan

Don’t tell her. And when she finally asks where did that come from. Say i’v had that for ages. It came the same day that next delivery Came for you. She can’t say nothing then. Or else get a coat in her size and that will cheer her up… lol

 

[JimboCX]

I think you could auction it on here Jim !

Ok i’l start the bids off at £16000 lol i

 

[Vinpetrol]

Give us all the details Jim . If it’s a nice wee machine it would be nice to see it go to a new home here .

 

[JimboCX]

2015 Case Cx18b
2100hours
In mint condition
Had two new tracks fitted about 400hours ago
Comes with semi hitch and three buckets
Fitted with extra work lights front and rear and Bluetooth hands free radio. Everything works as it should. Brilliant little digger. I may be off the mark but I thought it was worth around £12k

 

[Vinpetrol]

2015 Case Cx18b
2100hours
In mint condition
Had two new tracks fitted about 400hours ago
Comes with semi hitch and three buckets
Fitted with extra work lights front and rear and Bluetooth hands free radio. Everything works as it should. Brilliant little digger. I may be off the mark but I thought it was worth around £12k

How does the hammer lines work Jim ? On the lever or a pedal ?
Can you run a tilty from them ?

 

[JimboCX]

How does the hammer lines work Jim ? On the lever or a pedal ?
Can you run a tilty from them ?

Hammer works off the pedal. On the Cx18b and the cx19c. I don’t know what the story is with pipe’n it up for a tilty. I’m sure u Probly could. Aiden would know better? I watch a promovideo earlier for the new D range and the controls for hammer and moving the boom from side to side seem to be on the levers on them. I heard one time these new D series are a team up with eurocomach Don’t know if that’s true or not. But the don’t seem to have the same Hyundai look about them that the C series does!!

 

[V8Druid]

Hammer works off the pedal. On the Cx18b and the cx19c. I don’t know what the story is with pipe’n it up for a tilty. I’m sure u Probly could. Aiden would know better?

How does the hammer lines work Jim ? On the lever or a pedal ?
Can you run a tilty from them ?

think Vin is asking if the pedal/breaker is servo or rod controlled ... rod is far more difficult and expensive to fit a tilty to

 

[JimboCX]

think Vin is asking if the pedal/breaker is servo or rod controlled ... rod is far more difficult and expensive to fit a tilty to

I’m almost certain the Cx18b is rods! And I can’t be certain but I think the cx19c might be servo. I know the 37c is servo (I think) Lmao

 

[CPS]

I’m almost certain the Cx18b is rods! And I can’t be certain but I think the cx19c might be servo. I know the 37c is servo (I think) Lmao

Yea the CX18b seams to be cable controlled (I.E not servo) so not easy to fit a Tiltrotator to

 

[JimboCX]

 

[JimboCX]

First few weeks on the cx19c and I’m happy enough so far. Few we niggly things that take abit of getting used to.
1 position of hand throttle
2 position of radio
And 3 the big panel below the back window. It just completely blocks ur vision out the back.
Quick hitch wouldn’t pick up any of my buckets. Turns out my case Cx18b has a different size linkage to the new 19c. I have over 8 attachments for it so it was goina be a nightmare changing them all. Especially when I share the attachments with the airman micro. Dealer is currently getting me a new hyd hitch made to suit my buckets but it’s still a few weeks away. So I have made up a little semi hitch adapter to let me away for now. It’s frustrating having to get out and pull the pin to change buckets when I have a hyd hitch on the machine.

 

[JimboCX]

 

[JimboCX]

Nice little three tonne dumper added to the collection this week to replace my agey thwaites 7000

 

[CPS]

Tidy

 

[JimboCX]

So I have gave in and got the tan coloured injection again. Have put my name down for one of these. Not heard any reports on them yet. But got a good look around one last Saturday in my dealers yard. And they seem to be up there. My little airman was a good machine and done anything I wanted it to do. But I hated operating it with the levers out in front. It wasn’t a convertible drive on the airman. Also the case seems more user friendly with more leg room and no box for the tracking levers like takehuci and bobcat have means ur not knocking ur knees all the time. Diesal tank is on the inside of the black bonnet at the back when u open it up, so fairly handy to refuel. With my airman I hada drop blade open roll bar and flip the seat to get at the fuel tank. No big deal I know but anoying when u have all that to do just to refuel. Although the airman was zero swing the roll done away with this. To make it zero swing you hada screw the roll bar off. Anoying again. Case is 10mm wider but I don’t see that being an issue as I havnt been in that tight a spot yet. And if it is that tight then I think it’s a job for someone else to do as I’m to busy.