Workshop equipment

[wee_gus]

Good morning gents, I have seen a company I think in Northern Ireland that Make heavy duty workbenches with built in cupboards and drawers, but now I can’t find them. Anyone in the know?
Moving out of a container into a workshop so would like a decent work bench with storage.

Think I may also make a couple of these

http://www.allswageuk.co.uk/media/uploads/5b98c8d58e056.pdf

As the price bought are eye watering.

 

[CPS]

Good morning gents, I have seen a company I think in Northern Ireland that Make heavy duty workbenches with built in cupboards and drawers, but now I can’t find them. Anyone in the know?
Moving out of a container into a workshop so would like a decent work bench with storage.

Think I may also make a couple of these

http://www.allswageuk.co.uk/media/uploads/5b98c8d58e056.pdf

As the price bought are eye watering.

Yea I picked up there brochure at the ploughing championship ... but cant for the life of me think of there name. I might still have it in the office..... although I did have a clean up lately

 

[Smiffy]

Is it this type of stuff you are looking for

LISTA - Entrance

www.lista.com

They have several different ranges down the page

Probably one of these

LISTA - Workbenches

www.lista.com

 

[CPS]

This is the crowd i was thinking off

Grant Engineering - Northern Ireland, Tool Storage & Workbenches

Grant Engineering, Kilkeel. Workplace Storage, Tool Benches and Component Storage. We design, manufacture and install a wide range of professional workspace storage equipment.

www.grant-engineering.com

 

[wee_gus]

Thanks lads, lista stuff looks good.

Yes Aiden, that’s the very one! Grant engineering

 

[V8Druid]

Thanks lads, lista stuff looks good.

Yes Aiden, that’s the very one! Grant engineering

nice looking gear and although fair bucks, reasonable for what they're offering ...... hope the bench top is at least 3mm though ... can not beat having a good solid bench top for chucking gear about on ..... and'd need to be min. 8mm without plenty of support (like they do have)

 

[V8Druid]

Have a mate who has transmission biz .... made him half a dozen of these over the years for stripping gear boxes on ...... sloped 1" backwards ..... to a catch tray, which sloped to the centre and from there it was piped to a catch drum
6mm tops, muti-ribbed underneath
think this must've been one of the first ones .... can't find any more recent pix ..... but should have some somewhere ??

be good for stripping hydraulics too, I'd have thought

 

[Komatsu]

There are quite a few of these going through Euro auctions next week, seem to be well made with lots of draws etc http://www.euroauctionslive.com/servlet/Search.do?auctionId=482&itemId=662979&catalogLink=categoryName=Miscellaneous&orderBy=&ringAuctionId=&page=2&keyword=&auctionId=482&perPage=100

Euro Auctions Live | Online Bidding Platform

Euro Auctions Live | Online Bidding Platform

www.euroauctionslive.com

Euro Auctions Live | Online Bidding Platform

Euro Auctions Live | Online Bidding Platform

www.euroauctionslive.com

 

[Quattromike]

45kg per drawer, that’s just one spanner for @wee_gus

 

[Regy53]

They make a grand usually. There’s always loads of
Them. Be better if with the sealey workshop station that’s pretty nice. A friend of mine has one, I would love one in the future if I can get the workshop looking smart

 

[wee_gus]

45kg per drawer, that’s just one spanner for @wee_gus

I wouldn’t even know where to put my lunch box lol.

I see there is some in Leeds auction at end of Nov also, I will watch and see what the ones in dromore go for and possibly bid on some of the leeds ones if they do for reasonable money, may even take a run down to leeds and get a look

 

[wee_gus]

That does look o

They make a grand usually. There’s always loads of
Them. Be better if with the sealey workshop station that’s pretty nice. A friend of mine has one, I would love one in the future if I can get the workshop looking smart View attachment 9678

that does look pretty good, my workshop is a bit small for that at on 8.5x 4.5 mtr

 

[Komatsu]

I wouldn’t even know where to put my lunch box lol.

I see there is some in Leeds auction at end of Nov also, I will watch and see what the ones in dromore go for and possibly bid on some of the leeds ones if they do for reasonable money, may even take a run down to leeds and get a look

always fancied on my self to be fare, had a look round them a few times before and they seem strong and well built.

 

[CPS]

I wouldn’t even know where to put my lunch box lol.

I see there is some in Leeds auction at end of Nov also, I will watch and see what the ones in dromore go for and possibly bid on some of the leeds ones if they do for reasonable money, may even take a run down to leeds and get a look

If you bid on one in Dromore and get it I have no problem helping you with collection etc!

 

[doobin]

They make a grand usually. There’s always loads of
Them. Be better if with the sealey workshop station that’s pretty nice. A friend of mine has one, I would love one in the future if I can get the workshop looking smart View attachment 9678

A grand gets you a solid 8x4 workbench built from 20mm plate and scaffolding, a fair few second hand Bisley drawers, and probably change for a decent second hand vise...

Workbench cost probably £400 (less if you go thinner),and drawers average £40 each second hand, so you'd get 15 of them for £600 change left from the bench.

All better built than anything Sealey can make

 

[V8Druid]

45kg per drawer, that’s just one spanner for @wee_gus

hell Mike ... I thought I was a night owl -- 03:17 am FFS

 

[CPS]

6mm hardox

 

[Mark]

There are quite a few of these going through Euro auctions next week, seem to be well made with lots of draws etc http://www.euroauctionslive.com/servlet/Search.do?auctionId=482&itemId=662979&catalogLink=categoryName=Miscellaneous&orderBy=&ringAuctionId=&page=2&keyword=&auctionId=482&perPage=100

Euro Auctions Live | Online Bidding Platform

Euro Auctions Live | Online Bidding Platform

www.euroauctionslive.com

Euro Auctions Live | Online Bidding Platform

Euro Auctions Live | Online Bidding Platform

www.euroauctionslive.com

Seen these first had, they are very light made not worth buying.

 

[Mark]

Keep a look out on https://www.sweeneykincaid.com/
There’s always machine shops/fabrication shops been auctioned off some tidy stuff on there from time to time.

I bought a lot of stuff from the hewden auction in Glasgow when they went bust.

 

[Komatsu]

Seen these first had, they are very light made not worth buying.

Ones I’ve seen there were well made