M
Monkeybusiness
Well-known member
I use them quite a bit (nothing that big though!) - great company, really tidy kit.
pettsy
Well-known member
Still got on site this in town, what will that be costing a day
V8Druid
do it as well as you can,but learn to do it better
A hell of a lot!!!!
Lancs Lad
Well-known member
Not crane as such but they've been involved...I think it's about to get lifted into place over the M42...any reason why they've rigged it so high up? Some temp cribbing 
Literally sat up there. Quite a way from its final spot.
Literally sat up there. Quite a way from its final spot.
S
Smiffy
Well-known member
Not crane as such but they've been involved...I think it's about to get lifted into place over the M42...any reason why they've rigged it so high up? Some temp cribbing
View attachment 39860
Literally sat up there. Quite a way from its final spot.
I would take a fair guess that they will drive a set of hydraulic bogies underneath and drive it into place rather than lift it. They did it with the huge bridge in Gatwick airport. Was built a mile or so away and they drove it into place
Lancs Lad
Well-known member
Yes looking at the removed armco in front think your right
Lancs Lad
Well-known member
#safety | Mr Preventive : Maintenance and Safety News | 113 comments
#safety 📚 You should read ➡️ Electrical and Mechanical Engineering: Everything You Need to Know to Master the Subject—in One Book! ➡️ https://lnkd.in/eQhWizWj Source : https://lnkd.in/eQ2VNtFk | 113 comments on LinkedIn
V8Druid
do it as well as you can,but learn to do it better
wind? looks like the blades were up against the jib .... wouldn't take much of a gustSh*t!!
#safety | Mr Preventive : Maintenance and Safety News | 113 comments
#safety 📚 You should read ➡️ Electrical and Mechanical Engineering: Everything You Need to Know to Master the Subject—in One Book! ➡️ https://lnkd.in/eQhWizWj Source : https://lnkd.in/eQ2VNtFk | 113 comments on LinkedInwww.linkedin.com
V8Druid
do it as well as you can,but learn to do it better
Lancs Lad
Well-known member
Has the wind turbine bubble burst....?
www.linkedin.com
#cranes #cranehire #cranerental #windfarm #bankruptcy #administration #work #recrutement #employment #crawlercrane #mobilecrane #news | CRANE HUB | 31 comments
🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨 News is just coming in that UK crane hire company windhoist has gone in to administration in the last few hours. At this time our thoughts are with all the staff looking for new opportunities. being so close to Christmas and hope that they find work asap, we will be updating...
V8Druid
do it as well as you can,but learn to do it better
or have they just dropped one too many turbines/cranes to cover the costs ??Has the wind turbine bubble burst....?
#cranes #cranehire #cranerental #windfarm #bankruptcy #administration #work #recrutement #employment #crawlercrane #mobilecrane #news | CRANE HUB | 31 comments
🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨🚨 News is just coming in that UK crane hire company windhoist has gone in to administration in the last few hours. At this time our thoughts are with all the staff looking for new opportunities. being so close to Christmas and hope that they find work asap, we will be updating...
Conor
Well-known member
Had a fresh 250 ton Demag on the job I’m on yesterday putting up the tower crane, all up in the day, tested and ready for work this afternoon. I wasn’t staying late to see the jib put on, spent enough bloody hours here last week getting openings down through the basement slabs to get the crane in 
Attachments
V8Druid
do it as well as you can,but learn to do it better
followed a Sparrows 250ish into town yesterday afternoon, taking Clara to meet her mum at the doc.s .... was making fair progress on the 465, fair play ..... took some getting past - I was tight for time.Had a fresh 250 ton Demag on the job I’m on yesterday putting up the tower crane, all up in the day, tested and ready for work this afternoon. I wasn’t staying late to see the jib put on, spent enough bloody hours here last week getting openings down through the basement slabs to get the crane in
T
topkit
Well-known member
Looks like a Potain MDT tower crane going up there being red it could be an ex Kiers one, The tower crane division was sold of a while back I think HTC in Sheffield acquired a few of their cranes. Like to see a few more pics once the jib is fitted.Had a fresh 250 ton Demag on the job I’m on yesterday putting up the tower crane, all up in the day, tested and ready for work this afternoon. I wasn’t staying late to see the jib put on, spent enough bloody hours here last week getting openings down through the basement slabs to get the crane in
Conor
Well-known member
It’s a brand new Saez, I’ll get some photos tomorrow. Think I’m right in saying tls65 10 ton max capacity
Conor
Well-known member
Forgot to put photo up, have one up now. Was on one of our other projects today giving a hand for the day. Got a liebherr luffing job tower crane on the job.
Attachments
B
bobthebuilder
Well-known member
R
Rob65
Well-known member
Mog’s not so much of a bike man so I’m guessing not guilty on this occasion.
Mogman
What man as done, man can do, what never has,maybe
I’ve had a few, my last one Z1300 I sold and bought my first machineView attachment 42645Is this why Druid has been quiet for the last few days, has he been busy out on his patch building this?
Mog’s not so much of a bike man so I’m guessing not guilty on this occasion.
thought I’d be safer on a 3cx doing 20 MPH than 130 but your right not my work, mine would of had a bigger crane
V8Druid
do it as well as you can,but learn to do it better
nah ... been RAF againView attachment 42645
Is this why Druid has been quiet for the last few days, has he been busy out on his patch building this?
Mog’s not so much of a bike man so I’m guessing not guilty on this occasion.
Footer block 1