The 'Today's Job' thread

Furniss

Furniss

Well-known member
My 6t wouldn't lift this fecker if the grab would even span it...must be 3t in the bigger one......rethink required ...trenches not going to work here.
1000014098.jpg
1000014099.jpg
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Slabs like that are worth good money here. Make excellent clapper bridges on the moor. Farmer I know has a lovely 10ft span one. Sold it for 4k I think
that one was used for a bridge out to an island on a fishing lake ... we dug up a couple like it doing the excavations there and all went to the same use
WP_20170228_09_03_23_Pro.jpg WP_20170223_17_01_56_Pro.jpg WP_20170223_16_46_06_Pro.jpg WP_20170223_16_45_06_Pro.jpgWP_20170223_11_45_35_Pro.jpg
WP_20170223_11_45_26_Pro.jpg
 
Last edited:
Storrsy

Storrsy

Well-known member
As said 90s not ideal as will make it less accessible, but is you need to and the offset is too great then just crank it over to reduce the difference in invert levels
Couple of 45s did the trick nicely with them cranked a bit. Bedded in compacted 803 with about 10" over the top of them too so should be fine for the odd car/tractor. Few stones in the way too .
 

Attachments

  • IMG20250410155450.jpg
    IMG20250410155450.jpg
    348.8 KB · Views: 72
  • IMG20250410151531.jpg
    IMG20250410151531.jpg
    349.3 KB · Views: 81
  • IMG20250410151536.jpg
    IMG20250410151536.jpg
    351.2 KB · Views: 82
Giles

Giles

Well-known member

Attachments

  • 06ea4d9eb0d9186854b804c884240cc7.jpeg
    06ea4d9eb0d9186854b804c884240cc7.jpeg
    81.2 KB · Views: 69
  • f7d3e5449218c051b9e082148151cdb2.jpeg
    f7d3e5449218c051b9e082148151cdb2.jpeg
    69.8 KB · Views: 67
  • 9b1fd78f1e5ad2b5056a8d3b363ccdec.jpeg
    9b1fd78f1e5ad2b5056a8d3b363ccdec.jpeg
    85.6 KB · Views: 68
  • ff8a782513ce6828e0874f34c8f0d7dd.jpeg
    ff8a782513ce6828e0874f34c8f0d7dd.jpeg
    76.4 KB · Views: 74
  • 93ef47de4aea755e054f7b9017a77024.jpeg
    93ef47de4aea755e054f7b9017a77024.jpeg
    76.9 KB · Views: 71
Last edited:
TiltyShaun

TiltyShaun

Well-known member
Moved one for a customer that big.. had back wheels of 3cx off the ground- had to just tease it around on the forks.

Unloaded another customers custom kitchen from Italy came in 3 huge crates .. cost 250k which they told me afterwards 🤯
Did put a helicopter flight simulator up onto a mezzanine floor through a gap in the wall that didn’t have much clearance as they didn’t allow for the packing crate. They told me after it was something like £500k
 
hiluxman

hiluxman

Well-known member
Moved one for a customer that big.. had back wheels of 3cx off the ground- had to just tease it around on the forks.

Unloaded another customers custom kitchen from Italy came in 3 huge crates .. cost 250k which they told me afterwards 🤯

That sounds similar to my first tele porter driving lesson when I was 17. Artic load of Spanish tiles....n I'd never driven one before....thankfully I didn't break any but from that experience It never put me off driving one again.
 
Top