6
6feetdown
Well-known member
Especially with the tilty onstruggle the other way, unless it's a hell of a hole
Giles
Well-known member
When?7 year heat pump RHI payments are ending lol
Lancs Lad
Well-known member
From what I remember they started at least 7 years ago ...
V8Druid
do it as well as you can,but learn to do it better
Domestic Renewable Heat Incentive (RHI)
Help with renewable energy costs for homeowners and landlords through the RHI scheme.
Furniss
Well-known member
Some bits I saw today.
Been getting ready for some new wind turbines at the roundabouts....must be a length.
Look like a new shed is going up at the local tractor spot ...fair job by the looks.
Then our bit of scratting - tilty is becoming second nature after about 800hrs and saving lots of hand work and time after what felt a bit of a struggle to get the benefits initially.
All done from the top ...prepping for a treatment plant in tommorow hopefully.
That was in suppliers yard - bit of a weapon.
Been getting ready for some new wind turbines at the roundabouts....must be a length.
Look like a new shed is going up at the local tractor spot ...fair job by the looks.
Then our bit of scratting - tilty is becoming second nature after about 800hrs and saving lots of hand work and time after what felt a bit of a struggle to get the benefits initially.
All done from the top ...prepping for a treatment plant in tommorow hopefully.
That was in suppliers yard - bit of a weapon.
6
6feetdown
Well-known member
Popular in the states cpl utoobers run them
Furniss
Well-known member
New system of joining the straps for the tie down ....few installers struggling apparently, I dont know what that says about the average iq of us all or just keen to get it right
Any adavance on this
Last edited:
D
DaveDCB
Well-known member
A big reef knot
S
Smiffy
Well-known member
View attachment 62794
New system of joining the straps for the tie down ....few installers struggling apparently, I dont know what that says about the average iq of us all or just keen to get it right
View attachment 62795
Any adavance on this
Shouldn't each strap use the two adjacent bars rather than skip a bar.
M
Monkeybusiness
Well-known member
Looks good to me - plenty of friction to keep it together (assuming it allows you to tighten up sufficiently).View attachment 62794
New system of joining the straps for the tie down ....few installers struggling apparently, I dont know what that says about the average iq of us all or just keen to get it right
View attachment 62795
Any adavance on this
Left hooker
Well-known member
Today's job get myself and family to bristol airport
S
Steve
Well-known member
First part of your journey should go well now the A30 is open.
S
Stroppymonkey
Well-known member
Don’t fancy picking up a load of concrete rings from Truro on your way past and dropping them at my yard? You’ll practically be going past
Left hooker
Well-known member
Flew up not much traffic whole way
Was loaded on way up might need a back load on returnDon’t fancy picking up a load of concrete rings from Truro on your way past and dropping them at my yard? You’ll practically be going past
6
6feetdown
Well-known member
Hand or hold luggageDon’t fancy picking up a load of concrete rings from Truro on your way past and dropping them at my yard? You’ll practically be going past
William127
Well-known member
Just a bit of variety this week! Rake making, old school hole making on an enclosure install with full safety compliant access , prep the mill and deliver for a hire, stumps out and a type 1 pad at a school then start another roof top enclosure today.
Was supposed to be heading to Herefordshire straight from this job to go to Welland, but we didn't get off site till gone 5 so I went home via the yard to pick a couple of batteries up. My Dad had collected the mill so I stuck it's tarp back on. Needs a shed really, for that and the Takeuchi. Got a plan, got the main materials, just need to stick them together
Early night for an early start to Welland, drop the truck at the campsite first so I can have a well deserved beer or 3
Good week really
, prep the mill and deliver for a hire, stumps out and a type 1 pad at a school then start another roof top enclosure today. Was supposed to be heading to Herefordshire straight from this job to go to Welland, but we didn't get off site till gone 5 so I went home via the yard to pick a couple of batteries up. My Dad had collected the mill so I stuck it's tarp back on. Needs a shed really, for that and the Takeuchi. Got a plan, got the main materials, just need to stick them together
Early night for an early start to Welland, drop the truck at the campsite first so I can have a well deserved beer or 3
Good week really
Attachments
V8Druid
do it as well as you can,but learn to do it better
Crane fire causes delays on part of A38 in Plymouth
A crane fire is causing lengthy delays on the A38 between Plympton and Efford in Plymouth.www.bbc.com
one of my favourite Liebherrs, BTLs LTC 1045-3.1ooooh .... one of my favourite Liebherrs -- again .... this one's not on fire thoughJust a bit of variety this week! Rake making, old school hole making on an enclosure install with full safety compliant access
Was supposed to be heading to Herefordshire straight from this job to go to Welland, but we didn't get off site till gone 5 so I went home via the yard to pick a couple of batteries up. My Dad had collected the mill so I stuck it's tarp back on. Needs a shed really, for that and the Takeuchi. Got a plan, got the main materials, just need to stick them together
Early night for an early start to Welland, drop the truck at the campsite first so I can have a well deserved beer or 3
Good week really
William127
Well-known member
Very nice crane, couldn't belive how high the cab went
ooooh .... one of my favourite Liebherrs -- again .... this one's not on fire though
6
6feetdown
Well-known member
Yeah bet that helps the driver a fair bitVery nice crane, couldn't belive how high the cab went
S
Stroppymonkey
Well-known member
Tracing and chasing some damaged land drains on the project today . Think the damage was likely caused when we stripped off the top layer then ran the dumper over the top a few hundred times. Put it back as a French drain and will add a chamber and junction tomorrow to run another French drain up through my new unwanted lake. This is now the 4th known set of lands drains applied to this clay corner.
Footer block 1