V8Druid
do it as well as you can,but learn to do it better
coming out or going in ? see you have it wrapped
Lancs Lad
Well-known member
Can you just raise that tree up 3ft....
TiltyShaun
Well-known member
Got the digger stuck while removing logs from a “dry” pond.
Pics to follow if I get it out. Might have to stay there for a few days!!
Pics to follow if I get it out. Might have to stay there for a few days!!
V8Druid
do it as well as you can,but learn to do it better
I'd make some seeeerious efforts to extract it ..... rain and snow later in the week forecast .. quite a bit
TiltyShaun
Well-known member
Got a meeting elsewhere in the morning but will go and see if it is in a puddle in the morning. One track stuck so stopped before I made it completely stuck!!I'd make some seeeerious efforts to extract it ..... rain and snow later in the week forecast .. quite a bit
Hg2702
Well-known member
A day of podcast’s and peace and quiet ! Last scratch up before chucking some grass seed on when it warms up, just to concrete to move to the crush pile and some stone footpaths to put in and that’ll be one side of the house finished 
Attachments
Last edited:
D
DaveDCB
Well-known member
TiltyShaun
Well-known member
M
Monkeybusiness
Well-known member
Lower window got smashed?
TiltyShaun
Well-known member
Done that before this episode!! It is due a service and will treat it to to a new pane and a few mirrors!!
S
Smiffy
Well-known member
I find in some machines that the lower glass gets in the way when using the pedals and then just end up filthy from boots touching them So on a new machine on hire I took the glass out and put it in the site office. We where the only people on site. The developer comes in of a Saturday and threw it out. Luckily I found it unscathed and refitted it before the machine got collected
Storrsy
Well-known member
Furniss
Well-known member
FFS your gona need your Mr Sheene for that cab
6
6feetdown
Well-known member
Still putting others work right. Whoever did this 1 drilled 2 stop ends to let ground water in and also ran a land drain in, the chamber runs to the sceptic system!
V8Druid
do it as well as you can,but learn to do it better
think the engcon's gonna take some getting clean tooFFS your gona need your Mr Sheene for that cab
TiltyShaun
Well-known member
Left of out for the weather to work some magic before Friday!!think the engcon's gonna take some getting clean too
Giles
Well-known member
Is it on rubber tracks?
V8Druid
do it as well as you can,but learn to do it better
William127
Well-known member
Fair play to it, backed this trailer out of the field like it wasn't thereBw08, generic Chinese special. It's been OK for the money, does what I need but I don't think I'd recommend them
I'd have been better off buying a loader tractor to be honest but it wasn't really an option at the time.
But it does what I need, keeps the place tidy and means I can lift heavy stuff off the trailer
In an ideal world I'd have a Flat cconcrete yard with a forklift and a backhoe loader for the field/loose material, but it's not an ideal world
I really shouldn't have been trying to use this tip with the ranger today, nearly cost me very dearly- trailer strap box came within an inch of the truck- and no one to blame but myself.Reversing camera on the loader irritated a pet hate of mine though- wired into reverse on the shuttle, so the moment you put it in neutral you loose sight of the trailer hitch, not what you want when you're edging forward to line up the trailer hitch. I always wire cameras into the side lights if I fit them myself, that way you can use them for things like checking loads on the trailer as you're driving
Attachments
TiltyShaun
Well-known member
Metal tracks with bolt on rubbers.
I can make so many excuses for getting stuck but the tracks can only be blamed for not being wide enough to float on the soft part I was on. It comes down to operator error and that rests on my shoulders.
Footer block 1