steel studwork

[Russell]

I need to make some bits in the shed like a box for the compressor and tool shelving but dont want to use timber.
I would like to try the metal studwork and clad it with galv sheet. Can anyone recommend a place to buy it in smaller quantities ?

 

[Smiffy]

Like this stuff???

Channel Support Systems | Channel - F H Brundle

Channel support, delta plates and brackets, internal and external connector and other channel support systems accessories. Buy online or call to order.

www.fhbrundle.co.uk

 

[Russell]

I was thinking something like this?

Metal C Stud Partition & Steel Framing - 10 Pack & Various Sizes

Metal C Stud is a metal Drylining stud wall component designed for vertical use when building a wall.

www.fastbuildsupplies.co.uk

 

[6feetdown]

Most builders merchants of a reasonable size

 

[GazCro]

The only thing with metal studwork is it relies on whatever you clad it with to make it rigid. I don't know if thin galv sheet will be strong enough.

 

[Russell]

Maybe thin wall box might be a better option then.

 

[V8Druid]

Maybe thin wall box might be a better option then.

I need to make some bits in the shed like a box for the compressor and tool shelving but dont want to use timber.
I would like to try the metal studwork and clad it with galv sheet. Can anyone recommend a place to buy it in smaller quantities ?

gonna be noisy unless insulated .... don't forget ventilation ... compressors generate a hell of a lot of heat

 

[V8Druid]

not seen these before

Metal I-Stud Partitions - Trade Packs - Various Sizes - Fast Build Supplies

Buy metal I-stud for partition walls, offering a reliable & versatile system for domestic & commercial use. Order online for next day delivery.

www.fastbuildsupplies.co.uk

 

[6feetdown]

not seen these before
View attachment 38399

Metal I-Stud Partitions - Trade Packs - Various Sizes - Fast Build Supplies

Buy metal I-stud for partition walls, offering a reliable & versatile system for domestic & commercial use. Order online for next day delivery.

www.fastbuildsupplies.co.uk

The price!

 

[Russell]

Im tempted by one of these

DPB180Z - 18V LXT PORTABLE BAND SAW

Product

makitauk.com

 

[Bob]

www.norfolksteelbuildings.co.uk
Have erected these buildings until you get cladding on it a bit floppy

 

[V8Druid]

www.norfolksteelbuildings.co.uk
Have erected these buildings until you get cladding on it a bit floppy

assume you're talking about rolled section units ... from galv. sheet ... website is taking forever to load ... they're ultra flimsy 'til clad and forget about hanging much off the structure once finished

 

[V8Druid]

Im tempted by one of these

DPB180Z - 18V LXT PORTABLE BAND SAW

Product

makitauk.com

alright in the right application ..... good for tube work ......
used to have a yank one - can't recall the name W???? ... it'll come to me
had a complete set of clamp brackets to attach it to sections to give a nice square cut
for free hand a thin disc's so much quicker ...

and they ain't cheap

 

[DaveDCB]

I’ve done a very small amount of it, it’s so flimsy.. but a 12.5mm plaster board soon stiffens it up. Personally I prefer timber, a lot less faffy parts and cheaper!

 

[6feetdown]

I’ve done a very small amount of it, it’s so flimsy.. but a 12.5mm plaster board soon stiffens it up. Personally I prefer timber, a lot less faffy parts and cheaper!

Steel is hell of a lot quicker than timber, but I prefer timber for the strength.

 

[DaveDCB]

Steel is hell of a lot quicker than timber, but I prefer timber for the strength.

I imagine a long straight run is super quick, nothing we do is straight runs or long corridors etc. Keep wanting to get a plot to Chuck some new builds up - altho the new regs are getting stupid so kinda puts me off!

 

[Giles]

I need to make some bits in the shed like a box for the compressor and tool shelving but dont want to use timber.
I would like to try the metal studwork and clad it with galv sheet. Can anyone recommend a place to buy it in smaller quantities ?

I’m

alright in the right application ..... good for tube work ......
used to have a yank one - can't recall the name W???? ... it'll come to me
had a complete set of clamp brackets to attach it to sections to give a nice square cut
for free hand a thin disc's so much quicker ...

and they ain't cheap

I’ve got the DEWALT battery one and Aldi plug in one that has bench mount, they are fantastic tool For when you don’t want sparks or heat or grinding particles like near glass etc

Horse for courses 1mm disc quicker but band saw has more finesse

 

[Russell]

That's my thoughts. It would be nice to not always have to shoot concentrated sparks everywhere and to not put so much black dust in the air/ over every surface.
I ruined a good set of expensive overalls recently because I set my padded shirt on fire with grinder sparks. They are indeed a price though.
What voltage is your DeWalt one?

 

[V8Druid]

That's my thoughts. It would be nice to not always have to shoot concentrated sparks everywhere and to not put so much black dust in the air/ over every surface.
I ruined a good set of expensive overalls recently because I set my padded s**t on fire with grinder sparks. They are indeed a price though.
What voltage is your DeWalt one?

technique is get used to aiming where they go and buy a decent azzy blanket if sh1t's critical (and / or a leather apron) .....
lost count of the stuff I've knackered with the 'grinder shower', clothes wise ... fleeces being the most vulnerable
.. most recent victim ooops .... I have a pile of working fleeces covered in grinder dust/holes

bought my saw for site works on timber frame, where a 'hot works' permit wasn't achievable, but was a PITA to use most of the time ... Oh and was a Rems -- wanted a Yank one but couldn't find a UK supplier -- and replaced it with a Rems Tiger reciprocating saw .. way quicker to use and less of a handful in tight spots .... no good on thin stuff though

 

[pettsy]

Oh and was a Rems -- wanted a Yank one but couldn't find a UK supplier -- and replaced it with a Rems Tiger reciprocating saw .. way quicker to use and less of a handful in tight spots .... no good on thin stuff though