Breaker for a micro

[Jimbo69]

Any recommendations for a breaker to put on my Doosan and a rough idea of price?

 

[hiluxman]

Ive got a tecna breaker on mine. Its not a bad breaker. Dr pecker is the one to ask for price ect.

 

[doobin]

What model techna?

 

[hiluxman]

What model techna?

I think its a t60.

Its abit slow to get started because of the blank fire thingy but dr pecker said thats because of the small hyd lines on the machine and because they dont have a free flow return on them.

Its a good breaker otherwise and has broke plenty of thick coni out for me.

Suprisingly it runs slighty better on the dx10 than the e10.

For my other machine ive an altas copco and what a fantastic breaker that it.

 

[DaveDCB]

Atlas copco or rammer ,I won’t buy anything else

 

[Regy53]

can supply arrow head very well priced. Have sold a couple of handfulls with used machines and never had any bother. The sales guy ( i know hes paid to) tells me the rep from years ago isnt what it should be today much different company.

 

[Jimbo69]

can supply arrow head very well priced. Have sold a couple of handfulls with used machines and never had any bother. The sales guy ( i know hes paid to) tells me the rep from years ago isnt what it should be today much different company.

What price are they Ross? PM me if you want.

 

[T whiting]

Atlas copco is a nice breaker and very tolerant of back pressure and flow rate you can fit the same one on a micro upto a 3t machine it just runs a bit quicker on the bigger machine

 

[wee_gus]

I can offer you a HAMMER SB100 (100kg)
We have in stock ready for immediate delivery
With Forum discount I can offer it at £2300 + vat, RRP is £2700 + vat
2 years warranty
Comes with hoses and saddle for your set up.
2 chisels also included.
Also pictured is SB70, 70Kg
With forum discounts £1900+vat

 

[wee_gus]

These are a monobloc design so very little moving parts, made in Italy and part of the Kinshofer family for any doubts.

Give me a call on +447411063241 or email [email protected]

 

[Jimbo69]

Up to what size machine will the SB100 fit?

 

[hiluxman]

Up to what size machine will the SB100 fit?

It says 1.2t to 3.5t

 

[Brendan]

Got a great price off Dr pecker when was looking for prices

 

[wee_gus]

Up to what size machine will the SB100 fit?

Sb70 0.5-1.5T
Sb100 will go on 1.2to 3.5T
I advise max size on sb100 is 2.5t then sb150 2.5 upwards.

 

[Jimbo69]

It says 1.2t to 3.5t

I thought it did but couldn’t quite make it out on my phone

 

[hiluxman]

I thought it did but couldn’t quite make it out on my phone

Im not far behind you there.

 

[doobin]

Sb70 0.5-1.5T
Sb100 will go on 1.2to 3.5T
I advise max size on sb100 is 2.5t then sb150 2.5 upwards.

Was looking for a hammer to cover Bobcat E10, Hyundai R17 and Bobcat E27. What do you reckon?

Will it just be slower on the little one? I run the same auger on them all and it's not too bad.

 

[wee_gus]

Was looking for a hammer to cover Bobcat E10, Hyundai R17 and Bobcat E27. What do you reckon?

Will it just be slower on the little one? I run the same auger on them all and it's not too bad.

For all 3 machines I would be going for the SB100, your E10 will pump out around 18-20L/min so would be at max for SB70, E10 will handle the SB100 no problem

 

[wee_gus]

Lads, I’ve just updated the prices for those breakers, I was looking at wrong info, they are now about £300 cheaper, I shouldn’t be looking at stuff when I’ve had a beer