Auction watch

[Smiffy]

2019 Volkswagen Crafter CR35 Startline - No Vat – No Reserve

Gavel Auctioneers & Valuers | Unreserved Online Auction - 2019 Volkswagen Crafter CR35 Startline TDI Panel Van

www.gavelauctionsonline.com

" TDI Panel Van, Engine Size: 1968cc, Date of First UK Registration: 07/11/2019, Registration: GF69 WDK, Odometer Reading: 119689 Miles, 6-Speed Manual Diesel, Number of Former Keepers: 2, MOT Valid Until 29th April 2027, V5 Present, 2no. Keys, Full Service History, Air Conditioning, Parking Sensors & Timing Belt Changed at 100675, Please Note: No VAT on Hammer Price "

View attachment 83080View attachment 83081View attachment 83082View attachment 83083View attachment 83084

I don't know what that's at but it would want to be cheap as they are currently £36k +vat for the 3.5t towing capacity model with mid level trim.

 

[V8Druid]

I don't know what that's at but it would want to be cheap as they are currently £36k +vat for the 3.5t towing capacity model with mid level trim.

£5k earlier this evening

 

[pettsy]

Mot history doesn’t make it seem very well maintained

 

[Lancs Lad]

Mot history doesn’t make it seem very well maintained

Courier? Tidyish passenger seat and battered archs

 

[V8Druid]

rustychassismobile?? these the ones that snap in half???

2015 Nissan Navara Tekna DCI Pick-Up, Registration: SH65 YHP, Engine Size: 2488cc, Transmission: 6

www.gavelauctionsonline.com

"2015 Nissan Navara Tekna DCI Pick-Up, Registration: SH65 YHP, Engine Size: 2488cc, Transmission: 6 Speed Manual, Date of First UK Registration: 30/09/2015, No. Former Keepers 2, Odometer Reading: 74,815 miles, MOT: 15 December 2026, V5 Present, 1no. Key, Engine Management Light Illuminated "

 

[Russell]

I saw one of those at the local scrappy looking a bit bent.
Edit: found it

 

[Lancs Lad]

I saw one of those at the local scrappy looking a bit bent.
Edit: found it
View attachment 83118

I wonder how much of a job it would be to weld a proper chassis in there, extend it even and put a nice tray bed on.

 

[Russell]

If its anything like my old disco chassis it will be thin as all the way forward.

 

[V8Druid]

I wonder how much of a job it would be to weld a proper chassis in there, extend it even and put a nice tray bed on.

unless the rear axle remains in the same position, extending the wheel base will completely screw the steering geometry, with regards to the Akerman linkage set up - would eat front tyres unless modified

Steering Linkage Mechanism Explained: Ackermann Geometry, Parts, Diagram and Calculator

How a Steering Linkage works, with Ackermann geometry, tie rod sizing, bump steer math, and a worked example for an off-road truck build. Engineer's guide.

www.firgelliauto.com

Ackermann Steering Linkage Mechanism: How It Works, Diagram, Geometry, Formula and Uses Explained

Ackermann steering linkage geometry explained — how it eliminates tyre scrub, the formula to size it, and real examples from Formula SAE to forklifts.

www.firgelliauto.com

 

[V8Druid]

Gavel Auctioneers & Valuers | Unreserved Online Auction - Vehicle Fleet of M.J Harris Plumbing & Drainage Ltd

www.gavelauctionsonline.com

 

[Stroppymonkey]

Gavel Auctioneers & Valuers | Unreserved Online Auction - Vehicle Fleet of M.J Harris Plumbing & Drainage Ltd

www.gavelauctionsonline.com

Our Movanos have been very good trucks.. Basic and strong.

 

[Gecko]

If its anything like my old disco chassis it will be thin as all the way forward.

Breaking the bake of a ute has become common in Oz with people overloading them and then hitching on an overloaded caravan

It's the ratchet strap that worries me.

 

[hiluxman]

Breaking the bake of a ute has become common in Oz with people overloading them and then hitching on an overloaded caravan

It's the ratchet strap that worries me.
View attachment 83128

That's just the cable for pulling the roll and leak shut?