V8Druid
do it as well as you can,but learn to do it better
have you bought an Iron Fairy crane ???
JD450A
Feral as Fk 🐾
No, but at 8.1m outreach with three boom segments piping it conventionally is liable to be a twat. Pipework is all there bar the last link
V8Druid
do it as well as you can,but learn to do it better
sounds like you need a couple of retractable hose reels then ... or a hose and a leccy with a 6x2 change over on the grabNo, but at 8.1m outreach with three boom segments piping it conventionally is liable to be a twat. Pipework is all there bar the last link
JD450A
Feral as Fk 🐾
Hose reels...sod fkn around with leccy.
V8Druid
do it as well as you can,but learn to do it better
assume you have the two services required then Rory ?
JD450A
Feral as Fk 🐾
Yep and pipework to the 2nd boom.... but beyond that it's missing. Want to be able to put grab on the flyjib so hose reels are the winner.
Mogman
What man as done, man can do, what never has,maybe
Mogman
What man as done, man can do, what never has,maybe
how long do you need the pipes?Of course I have hydraulic ones got 3 I thinkand one electrical one
JD450A
Feral as Fk 🐾
Would be around 5mts I reckon.
Mogman
What man as done, man can do, what never has,maybe
V8Druid
do it as well as you can,but learn to do it better
what length can the leccy one handle and how many cores/conductors please @MogmanThis one is about 4ish
View attachment 34777
This on is about 8ish
View attachment 34779
And this one is for electric
View attachment 34778
... it might have to go into stock here for a future project
Mogman
What man as done, man can do, what never has,maybe
It’s 6 core and goes on a 16 meter telehandler but don’t think I’ll be parting with that one just yetwhat length can the leccy one handle and how many cores/conductors please @Mogman
V8Druid
do it as well as you can,but learn to do it better
well if you decide not to love it anymoreIt’s 6 core and goes on a 16 meter telehandler but don’t think I’ll be parting with that one just yet
keep me at the forefront of your mind .... what's it rated at Paul ?
Mogman
What man as done, man can do, what never has,maybe
10 ampswell if you decide not to love it anymore
V8Druid
do it as well as you can,but learn to do it better
as said
..if you decide not to love it anymore
Lancs Lad
Well-known member
The one coil was a bloody miracle it didn't kill anyone, in Hollybush
View attachment 34412
came off the truck at X , (no idea how??) .. went bouncing down the embankment and through the gap in the terrace, (two houses had been destroyed by fire a couple of years earlier and not been rebuilt), at the bottom, where it bounced on the black top at X , then careered on down a further embankment to a disused railway line at X , (which now appears to be a road - actually looking again the line is further across to the right and none of the bldgs were there ) ..... had to reverse a mile up the old line to get to it, lift it to one side, drive back out, drive back in, past it, artic then had to reverse the mile up the line and get it stuck on his trailer, he drove out and i had to reverse the mile back out
I'd already done four further up the valley, 'fore getting to this one and by the time i got out of there, were two more off further down in Blackwood in a bus shelter
was some day .... plod had a bloody field day .... I would NOT have wanted to deal with the paperwork for it all
#safety | Mr Preventive : Maintenance and Safety News | 90 comments
#safety Join our Telegram Community : Come discuss and exchange on engineering, safety and Industrial Topics 💡👷https://t.me/mr_preventive Source : https://lnkd.in/gjmqzUrJ | 90 comments on LinkedIn
Mogman
What man as done, man can do, what never has,maybe
Had a go at boaty Mc boat face yesterday managed to pull it up the slipway by about 15’ by pulling with the following
my 18 ton hitachi (broke two chains on the last pull)
my 20 ton duck (just out of shot)
a 22 ton Daewoo
a 13 ton Hyundai
a 38 ton crawler crane using the drag hoist as a winch with a snatch block
with a jones wheeled crane doing a bit of lifting of the boat (about 20 on the hook)
had 1/2 hour of chew time before tea time so left it like this
Still a bit to go
my 18 ton hitachi (broke two chains on the last pull)
my 20 ton duck (just out of shot
)a 22 ton Daewoo
a 13 ton Hyundai
a 38 ton crawler crane using the drag hoist as a winch with a snatch block
with a jones wheeled crane doing a bit of lifting of the boat (about 20 on the hook)
had 1/2 hour of chew time before tea time so left it like this
Still a bit to go
Furniss
Well-known member
Bloody hell took some muscle to drag that up ....where did you recruit and the men and machines from ?
6
6feetdown
Well-known member
Looks like a bit of a project, few weekends at leastHad a go at boaty Mc boat face yesterday managed to pull it up the slipway by about 15’ by pulling with the following
my 18 ton hitachi (broke two chains on the last pull)
my 20 ton duck (just out of shot
a 22 ton Daewoo
a 13 ton Hyundai
a 38 ton crawler crane using the drag hoist as a winch with a snatch block
with a jones wheeled crane doing a bit of lifting of the boat (about 20 on the hook)
View attachment 35306
had 1/2 hour of chew time before tea time so left it like this
View attachment 35307
Still a bit to go
Mogman
What man as done, man can do, what never has,maybe
The guy who owns the marina has them on site apart from my two
he has a couple of guys work for him full time and I got my pal from the scrapyard to operate my duck
Footer block 1