Lancs Lad
Well-known member
ahem....you forget about the mccormick/valdapena....
thats currently in bits in the workshop
thats currently in bits in the workshop
doobin
Well-known member
Not a proper hydro, only one range. Also only 23hp and not produced any longer.ahem....you forget about the mccormick/valdapena....
thats currently in bits in the workshop
Lancs Lad
Well-known member
Was in jest.
I'm ready to despatch it off a cliff
R
Russell
Well-known member
It's my disco 2. The sooner i get it done, the sooner i can get a project hicap.
Last edited:
doobin
Well-known member
The other day, I knocked up another oak trellis from some offcuts in order to grow some rambling roses above the bins. Makes the fifties extension housing the bathroom look a bit nicer.
JD450A
Feral as Fk 🐾
Furniss
Well-known member
Hot and Dusty here - new tank and trenches for the Mayor in a local commune - access across field saved some time and gravel came straight out of the skip, saved so much time over the last few years this hook truck 
cat about goosed with the heat - saw a welltop in a scrapheap, its sat on our well now, under review
moggy likes it
cat about goosed with the heat - saw a welltop in a scrapheap, its sat on our well now, under review
moggy likes it
J
Jimoz
Well-known member
Bit of a sale on at the steam rally today. Had 2 of these there wonder which unlucky punters did the deal. Actually managed to change the drivers side wiper blade on my 2010 kangoo today as it had been delivered when we got home. For some reason renault have made this quite fiddly there's videos online of people having to unbolt the arms to do it! Anyway I spun it upside down and managed to thread thru before flipping it.
Attachments
Furniss
Well-known member
Lancs Lad
Well-known member
Afternoon at the lake...
And a Dakota has just cruised over and disappeared over the hill.
Cheers lads
And a Dakota has just cruised over and disappeared over the hill.
Cheers lads
CPS
Well-known member
It was over here too, didnt manage to see it though
Furniss
Well-known member
hmmm "bon boulot" as they say over here 
V8Druid
do it as well as you can,but learn to do it better
intestins de cochon
William127
Well-known member
Pampas grass anchor worked a treat, and loosened up a bit for when it's time for that to come out Got the stumps out and a trailer full of brash away before the sun got too much. Going into the shed now 
Friend and his wife inherited this house from a harder, it's taken years to get the house clear, 30+ bulkbags of non green waste from the garden so far apparently
He's a P38 enthusiast though so he has plenty of patience
Got the stumps out and a trailer full of brash away before the sun got too much. Going into the shed now Friend and his wife inherited this house from a harder, it's taken years to get the house clear, 30+ bulkbags of non green waste from the garden so far apparently
He's a P38 enthusiast though so he has plenty of patience
Attachments
J
Jimoz
Well-known member
Re glazed this conny today. Needed a short day as had to make an airport run luckily went well and was done for 11. Getting the old buttyl putty off was hard work luckily had trusty multi tool, what did we do before them (did actually use the scraper too). Gave it a proper workout seemed to work better on the side edge of the blade. My fingers were proper tingly after. How long on something do you need for vibration white finger? This was less than an hour.
Attachments
Lancs Lad
Well-known member
DeWalt? Original fein miles better for vibration they have bushes either side.
They do a putty removal tool...
J
Jimoz
Well-known member
Makita unfortunately. Ill look at them putty removal tool/blade if I have a lot to do in future. These were beaded units just bedded on putty so not too bad. He had me do 6 of the 9 units so I suspect ill be back there next year. The old ones were just flat glass but were below 800mm and obviously in/near doors. I asked down the glazing merchants and they think the toughened reg came in 80s so conny could predate that but I doubt it
V8Druid
do it as well as you can,but learn to do it better
rarely see Fein tools these days .. have a few - their 9" grinders were the best ever, but inevitably die eventually
Lancs Lad
Well-known member
Big in the metal market only really now.rarely see Fein tools these days .. have a few - their 9" grinders were the best ever, but inevitably die eventually
Their dominance in the oscillator tools market ended once the cordless mob arrived.
They still the best though. They make festools one
Footer block 1