Late Spring clean up. Various attachments etc for sale.

[DaveDCB]

Right folks,

Anyone want to be the first to have a Dala-gripen DGI grab. Its the new "Digging" style of grab. Has reversible edges with serrated edge one side and straight the other.
Proper teeth and sides can be added.
Slightly bigger than the equivalent selector grab, you could put this on a machine up to about 8 ton under a tilty etc.

New and unused yet, just piped it up to see what it was like.

£3600 plus vat. Or very best offer.


View attachment 61642View attachment 61643View attachment 61644

I’ll swap you for the Engcon equivalent?

 

[Giles]

Right folks,

Anyone want to be the first to have a Dala-gripen DGI grab. Its the new "Digging" style of grab. Has reversible edges with serrated edge one side and straight the other.
Proper teeth and sides can be added.
Slightly bigger than the equivalent selector grab, you could put this on a machine up to about 8 ton under a tilty etc.

New and unused yet, just piped it up to see what it was like.

£3600 plus vat. Or very best offer.


View attachment 61642View attachment 61643View attachment 61644

Looks a good tool

 

[CPS]

SOLD!!!


Selling our Bobcat E10

2014 (ish) model. 3400hrs, fully overhauled and painted 3 years ago, every pin and bush and kingpost line bored, has only done about 50hrs since.
Only used as our IDig demo machine..... has done more miles (on a trailer) than hours

S30 manual hitch, 600mm digging bucket with teeth, 300mm and grading bucket.

Was hoping for about £8500... can be shipped on a double pallet.

Any Interest?

 

[CPS]

Brand new Tecna T80 hammer.

Supplied with bracket to suit your machine and hoses.

Suitable for 1 - 2 ton machines

£2300... normally about £2600

 

[DaveDCB]

@CPS is that @V8Druid steels for his new shed in the background….??

 

[6feetdown]

@CPS is that @V8Druid steels for his new shed in the background….??

Be jeezus no that is his new shed Aiden shipping on 4 pallets

 

[CPS]

@CPS is that @V8Druid steels for his new shed in the background….??

No problem getting him a few frames around here

 

[CPS]

Be jeezus no that is his new shed Aiden shipping on 4 pallets

Might need mogman for that load

 

[6feetdown]

Might need mogman for that load

Get a return on that low loader

 

[Lancs Lad]

View attachment 62963View attachment 62964View attachment 62965View attachment 62966

Selling our Bobcat E10

2014 (ish) model. 4000hrs, fully overhauled and painted 3 years ago, every pin and bush and kingpost line bored, has only done about 50hrs since.
Only used as our IDig demo machine..... has done more miles (on a trailer) than hours

S30 manual hitch, 600mm digging bucket with teeth, 300mm and grading bucket.

Was hoping for about £8500... can be shipped on a double pallet.

Any Interest?

Plus VAT I'm presuming?

 

[CPS]

Plus VAT I'm presuming?

Yea, plus vat....

 

[CPS]

View attachment 62963View attachment 62964View attachment 62965View attachment 62966

Selling our Bobcat E10

2014 (ish) model. 3400hrs, fully overhauled and painted 3 years ago, every pin and bush and kingpost line bored, has only done about 50hrs since.
Only used as our IDig demo machine..... has done more miles (on a trailer) than hours

S30 manual hitch, 600mm digging bucket with teeth, 300mm and grading bucket.

Was hoping for about £8500... can be shipped on a double pallet.

Any Interest?

Just had a look and there's only 3400 hours not 4000

 

[DaveDCB]

Just had a look and there's only 3400 hours not 4000

Give it another few days and it will be 2900 hours

 

[CPS]

Brand new S30-180 manual hitch.

To suit A kx61 30mm pins, 110mm dipper width, 140mm pin Centre.

New unused, cancelled orders..... apparently someone read the order sheet wrong🫣

£600 free postage

 

[CPS]

For sale.

BAV CB8 crusher bucket.

Suit machines from 6 - 10 ton or so.

Has grid to make smaller materials also.

Brilliant condition, hardly used.

Looking for 8k, but hit me with an offer.... View attachment 57689View attachment 57690View attachment 57691View attachment 57692View attachment 57693View attachment 57694View attachment 57695

Hi Folks,

Looking shot of this, £7500.... or make me a good offer (feck off Rory) Paddy needs money.

 

[CPS]

View attachment 62967

Brand new Tecna T80 hammer.

Supplied with bracket to suit your machine and hoses.

Suitable for 1 - 2 ton machines

£2300... normally about £2600

Also looking to blow this out...

2k to any member here... decent price

 

[JD450A]

Also looking to blow this out...

2k to any member here... decent price

£500

 

[CPS]

Ok lads.
I'm giving you lads a great offer here first. Before I stick it up on our SM pages.

Ex Demo IDig touch 2D system.
This is one we used for about 12/15 months on our demo machine and deom trolley.
comes with everything you need for 1 machine, has the lastest software etc.

One off price of £5000 plus vat to a forum memember.
Wont find one better with full backup

 

[DaveDCB]

Does that work with a tilty….?

 

[CPS]

Does that work with a tilty….?

Its standard setup, tilt sensors and rotation sensors can be added. Now if your running SVAB on your tilty rotation might not be possible.

One thing worth noting, the standard 2D system will work 100% with out tilt or rotation sensors, you just have to have the bucket back in standard digging position to get accurate readings. We have alot of customers using it with out these on tiltys.

3D would need the extras with a tiltrotator As it could cause drift and be inaccurate.

Also worth noting that all extras can be added on at anytime.