Canal Navvy
Well-known member
Looking at doing the same
, what type/size of magnet works best ? Obviously don't want the level to fall off but wonder if those fancy super magnets interfere with the working of the level
Looking at doing the same
, what type/size of magnet works best ? Obviously don't want the level to fall off but wonder if those fancy super magnets interfere with the working of the level
V8Druid
do it as well as you can,but learn to do it better
couple of these 'd do a hell of a job Boyo .... they take some prying offLooking at doing the same
Obviously don't want the level to fall off but wonder if those fancy super magnets interfere with the working of the level
A-SMW3 Magnetic Ground Clamp Grounding Block Magnet ARC Welder Welding Wire 5903246520446 | eBay
ASTA A-SMW3 is magnetic ground clamp for welding.You can ground your weld fast with this handy magnetic welding block. A high powered magnetic base sticks to anything you weld making it perfect for pipe and pieces you can't grab.
www.ebay.co.uk
T whiting
Well-known member
79 x 53 x 12mm x M6 Rubber Coated Mag Pad - 10kg Pull
Rubber-coated magnetic pad complete with steel plate and fixing nut and bolt. Ideal for securely attaching rooftop signs to vehicles.
www.first4magnets.com
These work pretty well are not overly strong and the rubber is bonded on so it isn't loose like it is on mine the rubber seems to be key to making sure it doesn't slip
Bri963
Well-known member
Never used one of these, Gra. Isn’ there a problem with blow?couple of these 'd do a hell of a job Boyo .... they take some prying off
A-SMW3 Magnetic Ground Clamp Grounding Block Magnet ARC Welder Welding Wire 5903246520446 | eBay
ASTA A-SMW3 is magnetic ground clamp for welding.You can ground your weld fast with this handy magnetic welding block. A high powered magnetic base sticks to anything you weld making it perfect for pipe and pieces you can't grab.www.ebay.co.uk
V8Druid
do it as well as you can,but learn to do it better
the brass stud is spring loaded against the job Bri ... the magnet holds it 'on station' and the stud makes the electrical contact ... not the magnet
V8Druid
do it as well as you can,but learn to do it better
they're bloody cheap Thomas79 x 53 x 12mm x M6 Rubber Coated Mag Pad - 10kg Pull
Rubber-coated magnetic pad complete with steel plate and fixing nut and bolt. Ideal for securely attaching rooftop signs to vehicles.
These work pretty well are not overly strong and the rubber is bonded on so it isn't loose like it is on mine the rubber seems to be key to making sure it doesn't slip
Canal Navvy
Well-known member
I bet you'd have to be a bit selective where you stick it on DC
T whiting
Well-known member
Yes and supprisingly effective I've used them to mount a spotlight on
Mogman
What man as done, man can do, what never has,maybe
I’ve had one was shite the brass pin has to make a very good connection else it gets hot, then the spring gets week, then the brass pin doesn’t connect properly so gets even hotter and the cycle continues
V8Druid
do it as well as you can,but learn to do it better
understood and duly noted MogI’ve had one was shite the brass pin has to make a very good connection else it gets hot, then the spring gets week, then the brass pin doesn’t connect properly so gets even hotter and the cycle continues
T whiting
Well-known member
A little set of footings dug this weekend
V8Druid
do it as well as you can,but learn to do it better
T whiting
Well-known member
Yes I was sat in the helicopter dropping it off for the photos 
Tbh it's nice to have a bit of verity. I've been house bashing with the duck since October it pays the bills but nothing to shout about
Tbh it's nice to have a bit of verity. I've been house bashing with the duck since October it pays the bills but nothing to shout about
T whiting
Well-known member
Quick repair on the @Laser Levels Online laser remote went to square a corner and there was no life in the remote. Opened it up and found a dry joint on one of the battery terminals
T whiting
Well-known member
New addition to the fleet recently.
Vinpetrol
Well-known member
Any issues with the sprinter Tom ?
T whiting
Well-known member
It's got a check engine light on for a adblue sensor that noone can find a new one for but other than that it's been fine
T whiting
Well-known member
The ducks feeling a bit poorly at the moment. I was struggling with it being hard to control. So we checked the pilot pressures to find it down
. Went to adjust it up and found it was already at max. So we've had the pump out and away for a refub
M
mart1602
Well-known member
looks like easy access
T whiting
Well-known member
Not the best but ok once the valve block was half undone and moved to the side
Footer block 1