V8Druid
do it as well as you can,but learn to do it better
who or what is "Heltor" ?
S
Stroppymonkey
Well-known member
Fuel suppliers…who or what is "Heltor" ?
S
Stroppymonkey
Well-known member
Fuel suppliers.who or what is "Heltor" ?
Attachments
Giles
Well-known member
M
Monkeybusiness
Well-known member
What’s with the tracks by your buckets? Can’t need new at 100 hours?!…
Bri963
Well-known member
Took them off to save wear.
S
Stroppymonkey
Well-known member
My E10 is close to 200 now. Still think I prefer the orange.
hiluxman
Well-known member
My e10 is on 2000 hrs. Think the dx10 was on about 700 before it was nicked. Lots of time sat in the seat.
S
Stroppymonkey
Well-known member
Someone was caught sniffing round my e10 couple nights ago. It’s currently parked on a bit of wasteland that we own at the end of the garage block by my house in the village. I’ve moved it so it’s in view of my Ringdoorbell. How was your DX10 pinched?
hiluxman
Well-known member
They were extremely lucky b's
It was the only machine I'd not gotten round to fitting an iscolator to. They also forced it down the side of my lorry and range rover to get it out...if lorry was 2inch further over they wouldn't of fitted it past.
They tried the e10 too but couldn't get it going.
The lads in the yard thought it was us working late and less than a day later the van was seen in Dover
S
Stroppymonkey
Well-known member
Is it a key start on the E10?
hiluxman
Well-known member
Yes but if you've a keypad its very very easily bypassed
S
Stroppymonkey
Well-known member
Yeah. Mine went wrong and dealer showed me how to bypass with a £20 bobcat key barrel
hiluxman
Well-known member
I don't trust any form of keypad start. It's sold as a great deterent but in reality it doesn't stop anyone bar the labourer moving your machine out of the way.
S
Stroppymonkey
Well-known member
It stops me loosing the key
Giles
Well-known member
For the hinowa barrow it’s got a nasty rip in 1 track which will let go at some point
Attachments
S
Stroppymonkey
Well-known member
Is that the high tip one with adjustable tracks?
Giles
Well-known member
High tip non adjustable, the Kubota branded one is adjustable not sure if hinowa sell an adjustable one in uk
V8Druid
do it as well as you can,but learn to do it better
was my thoughts too
Giles
Well-known member
Bloody wet one today, moved machines and final fettle on Gabion job
Then afternoon fixing a few things trying to get ahead .
Mechanical drive pump on auction saw was seized stripped it down and got it spinning so filled it with high temp lithium grease and built it back up
Then afternoon fixing a few things trying to get ahead .
Mechanical drive pump on auction saw was seized stripped it down and got it spinning so filled it with high temp lithium grease and built it back up
Attachments
Last edited:
Footer block 1