The 'Today's Job' thread

D

DaveDCB

Well-known member
I have a simple set of RAMS and plan laminated, in the cab so can show them and they can photo copy if needed
Also got the same in my phone so can email to the customers office if needed
“When it beeps put ear defenders on?”
 
C

Cal919

Well-known member
In the woods yesterday, clearing a bit of ground to give water somewhere to disperse. Been having flooding problems recently. Water just gets funnelled down hill then down our lane, trying to give it a bit of relief before it gets to us then going to add a soakaway off lane.
 

Attachments

  • IMG_9702.jpeg
    IMG_9702.jpeg
    480 KB · Views: 168
  • IMG_9724.jpeg
    IMG_9724.jpeg
    418.2 KB · Views: 153
  • IMG_9723.jpeg
    IMG_9723.jpeg
    423.6 KB · Views: 125
  • IMG_9704.jpeg
    IMG_9704.jpeg
    493.6 KB · Views: 130
  • IMG_9710.jpeg
    IMG_9710.jpeg
    536.8 KB · Views: 125
  • IMG_9708.jpeg
    IMG_9708.jpeg
    465.4 KB · Views: 117
  • IMG_9709.jpeg
    IMG_9709.jpeg
    487.4 KB · Views: 123
  • IMG_9706.jpeg
    IMG_9706.jpeg
    475.6 KB · Views: 126
  • IMG_9711.jpeg
    IMG_9711.jpeg
    496.7 KB · Views: 118
  • IMG_9703.jpeg
    IMG_9703.jpeg
    459 KB · Views: 116
D

Davedb

Well-known member
Reclaiming a bit of ground didn’t take a picture of the before :rolleyes: but went in with tractor and 9ft flail first that made mince meat of the 20 years of neglect then digger to flail the fence line to make it easier to cut any branches off (need a tree sheer really)
 

Attachments

  • IMG_0666.jpeg
    IMG_0666.jpeg
    273.2 KB · Views: 137
  • IMG_0665.jpeg
    IMG_0665.jpeg
    344.6 KB · Views: 147
  • IMG_0664.jpeg
    IMG_0664.jpeg
    512.8 KB · Views: 157
TiltyShaun

TiltyShaun

Well-known member
Been busy getting the floor slab on the latest little new build we have on the go.
 

Attachments

  • BAF3CADD-081C-42C0-B164-44908BF07772.jpeg
    BAF3CADD-081C-42C0-B164-44908BF07772.jpeg
    269.2 KB · Views: 146
  • IMG_0969.jpeg
    IMG_0969.jpeg
    225.3 KB · Views: 138
  • IMG_0976.jpeg
    IMG_0976.jpeg
    340 KB · Views: 120
  • IMG_0977.jpeg
    IMG_0977.jpeg
    287 KB · Views: 128
  • 59B2BA2D-108F-4135-A220-C10CEBD951E8.jpeg
    59B2BA2D-108F-4135-A220-C10CEBD951E8.jpeg
    245.9 KB · Views: 151
Giles

Giles

Well-known member
Reclaiming a bit of ground didn’t take a picture of the before :rolleyes: but went in with tractor and 9ft flail first that made mince meat of the 20 years of neglect then digger to flail the fence line to make it easier to cut any branches off (need a tree sheer really)
What flail are you running? Converted tractor hedge cutter?
 
D

DaveDCB

Well-known member
Yea just a head of a bomford hedge cutter works fairly well I’d like try put a pump on the digger for it tho if I could find room🙈
Same as mine then, it was mega on the 3cx which had a free flow return to tank, rotor would sit spinning freely for ages once it was turned off! Joysticks operated on the seat facing foreword, was a joy to use tbh. Just needed a lock on option for the hammer circuit as the old finger soon ached holding it down!
 
D

Davedb

Well-known member
Same as mine then, it was mega on the 3cx which had a free flow return to tank, rotor would sit spinning freely for ages once it was turned off! Joysticks operated on the seat facing foreword, was a joy to use tbh. Just needed a lock on option for the hammer circuit as the old finger soon ached holding it down!
Mine spins free as I T the lines together with a check valve between them hopefully stops the motor blowing its seals out due to back pressure, my trouble is hydraulic flow but I think the pump is getting tired on the digger tbf with 5500hours on it
 
V8Druid

V8Druid

do it as well as you can,but learn to do it better
Mine spins free as I T the lines together with a check valve between them hopefully stops the motor blowing its seals out due to back pressure, my trouble is hydraulic flow but I think the pump is getting tired on the digger tbf with 5500hours on it
cheaper option than a cross line relief valve for sure and works very well
 
Thomas7740

Thomas7740

Well-known member
View attachment 51768
This was the best one, picked that up then slewed round 180 with it across the traffic 👌🏻
Poland is the same, seen a school trip walking among moving diggers, a small telehandler driving full pelt up a footpath and people jumping out of the road, not one feck given, made a nice change. Here’s some from poznan in June, diggers right beside us at a pub. How did things in Britain get so soft

IMG_7953.png
IMG_7954.png
 
Top