What unbraked 750KG single axle trailer

[V8Druid]

got a link Vin?

forget it .. found it ..... ask if you can have it on 13" wheels .. 10s are too small for a 750 trailer IMHDO
'kin expensive for what it is .... but got to pay for the RR sport and fancy number plates somehow?
http://www.batesontrailers.com/shop...ailers-grounds-maintenance-general-quad-bike/

might see if I can't farm out the sheet cutting / folding somewhere and make a few now and again

 

[Quattromike]

used to get that here .... " I don't possess a smaller trailer - I can unload it here, now, or on the floor outside the gates, after you've gone home - your choice " was my approach

The recycling centre in Elgin has a numberplate recognition camera up, you have to book a time slot online a day in advance of arrival, the gate only opens when you're there at the right time with the right vehicle number. Who the duck plans their dump runs, it has to be spontaneous or else its no fun.
However if you drive along to Forres it's an absolute free for all and you basically drive in and abandon whatever you've got in the vacinity of the corresponding skip and take off without seeing anyone

 

[pettsy]

I could write pages about the local tip. There’s no booking required, just turn up. Cars and 4x4 with trailer no issue, went in plain van with my work hoody on to drop a couple of 20kg bags of plasterboard offcuts in and it kicked off. Fortunately I’d emptied them quick, and had an answer for all of the blokes crap. “If you’re having plastering done you should of had a skip”…..” well if I should have, so should all the others you’ve let fill the plasterboard skip”. Told me he had the “power to ban me from site” so I just told him to do his worst and jog on Fortunately most of workers are ok. If there’s any doubt I send the Mrs and they jump over themselves to help!!

 

[Vinpetrol]

make sure it IS 8+ft x 4+ft internally Vin .. or you'll be carrying 8' x 4's on bearers, across the top lips of the trailer body

got a link Vin?

B84 Unbraked Trailer | Bateson Trailers

 

[Vinpetrol]

make sure it IS 8+ft x 4+ft internally Vin .. or you'll be carrying 8' x 4's on bearers, across the top lips of the trailer body

It is slightly bigger than 8x4 all round so it will carry sheets . The one I’m getting has mesh sides as specd by Mrs P and she will use it more than me so I’m not arguing !
It’s light so she can manoeuvre it around nicely .
Hopefully she will pick it up tomorrow so I will put a pic up

 

[Steve]

forget it .. found it ..... ask if you can have it on 13" wheels .. 10s are too small for a 750 trailer IMHDO
'kin expensive for what it is .... but got to pay for the RR sport and fancy number plates somehow?
http://www.batesontrailers.com/shop...ailers-grounds-maintenance-general-quad-bike/
View attachment 47137
might see if I can't farm out the sheet cutting / folding somewhere and make a few now and again

Yeah but 10”wheels give it that low profile look coupled with a racing stripe commands a greater price.

 

[Vinpetrol]

I had a look at the equivalent ifor. It was very heavy feeling to manoeuvre and a bit dearer as well . I was hoping that the ifor would fit the bill as have 2 already and very happy with them but the Bateson initially fits the bill better