Kx71-3 Hydraulic Filter

[TiltyShaun]

I have been doing some maintenance today and unscrewed the hydraulic tank cap to find the filter floating in the oil.

Does anyone have a workshop manual showing how it all goes back together as I cant find anything on google !!

 

[pettsy]

Not sure if this will help at all?

 

[TiltyShaun]

Thank you. Looks like the bits I have fished out of the tank!!

 

[Giles]

Mine did this had to get arm in hot oil reseat it on spigot then L shape locates under side of cap to keep it in place watch big o ring on the lid

 

[Mick-the-fitter]

Mine did this had to get arm in hot oil reseat it on spigot then L shape locates under side of cap to keep it in place watch big o ring on the lid

Make sure spring in the correct place also.

 

[TiltyShaun]

It is all back together apart from the ram that is leaking. Tried patching it with some epoxy but it squirted out even more. Hopefully my mate who is handy with the hot glue will have it back to me shortly. It is being missed!!

 

[Giles]

Make sure spring in the correct place also.

Where’s the spring Looking at diagram above?

 

[Mick-the-fitter]

Where’s the spring Looking at diagram above?

No your right I was thinking U48! This type had a o ring in the filter at the bottom, a long rod, with a loop at the top that located around a peg on the inside of the cover!