Vinpetrol
Well-known member
Definitely not up here !
Hence the French drain at the back of the cut
I’ve also got a drain off cut at the corner of the found
Last edited:
GazCro
Well-known member
Quattromike
Well member-known
Tbf we've had the dryest January for a long time here in Moray
Vinpetrol
Well-known member
We have over here Mike and the warmest but your tempting fate with that statement !Tbf we've had the dryest January for a long time here in Moray
Vinpetrol
Well-known member
Where's the type1 then?
We normally do especially on a site like this , if you spit on the ground it turns into a bog. We have tarmac plainings in the entrance where the vans are . I’m sure the builder will request some once we’ve swung in the blocks !
F
fred
Well-known member
Looks a lovely location
GazCro
Well-known member
Customer, its quite soily in that corner id like to plant a few shrubs etc could you make sure there's plenty soil when you're finished. Yeah no problem I'll dig over what's there and screen it first
Better being some soil to replace the stone then
Better being some soil to replace the stone then
Grahams
Don't complain - suggest what's better
Don’t tempt fate, we are working in Kinloss week after next, bet we’ll have snow.Tbf we've had the dryest January for a long time here in Moray
JD450A
Feral as Fk 🐾
Between jobs have dragged this sorry heap of s**t out the field.
I hate this prick of a thing, every now and then I become stupid enough to attempt to start it and use it. (I'd sell it but for weird reasons related to family and the need to hang on to random worthless s**t I can't)
Brake master cylinder isn't working properly.
Oh and the s**t checkvalves circa jcb 2004 are corroded to f**k. Anyone know someone that'd fit new, or am I going to be best getting the f****ng things cut out
no Grab it doesn't need cetops
I hate this prick of a thing, every now and then I become stupid enough to attempt to start it and use it. (I'd sell it but for weird reasons related to family and the need to hang on to random worthless s**t I can't)
Brake master cylinder isn't working properly.
Oh and the s**t checkvalves circa jcb 2004 are corroded to f**k. Anyone know someone that'd fit new, or am I going to be best getting the f****ng things cut out
no Grab it doesn't need cetopsAttachments
GazCro
Well-known member
No help on the checkvalves other than they are no better by 2007 and if the hub seals aren't leaking there must be no oil in the hubsBetween jobs have dragged this sorry heap of s**t out the field.
I hate this prick of a thing, every now and then I become stupid enough to attempt to start it and use it. (I'd sell it but for weird reasons related to family and the need to hang on to random worthless s**t I can't)
Brake master cylinder isn't working properly.
Oh and the s**t checkvalves circa jcb 2004 are corroded to f**k. Anyone know someone that'd fit new, or am I going to be best getting the f****ng things cut out
There's actually quite a bit of meat in the checkvalve body so unless they have sprung a leak they might not be as bad as they look.
GazCro
Well-known member
Looked a bit better yours are a lot worse than mine
V8Druid
do it as well as you can,but learn to do it better
have told you before ... stick one of these on 'em ..... job didBetween jobs have dragged this sorry heap of s**t out the field.
I hate this prick of a thing, every now and then I become stupid enough to attempt to start it and use it. (I'd sell it but for weird reasons related to family and the need to hang on to random worthless s**t I can't)
Brake master cylinder isn't working properly.
Oh and the s**t checkvalves circa jcb 2004 are corroded to f**k. Anyone know someone that'd fit new, or am I going to be best getting the f****ng things cut out
"""Hydraulic double pilot operated check valve, VBPDE 3/8 L | Pilot Operated Check Valves | Hydraulic Valves"""
"""Hydraulic double pilot operated check valve, VBPDE 3/8 L from our range of Pilot Operated Check Valves, part of our wide collection of Hydraulic Valves."""
Vinpetrol
Well-known member
What work are you doing up this way ?
Quattromike
Well member-known
Yes there's snow forecast for next week
Grahams
Don't complain - suggest what's better
Working in Kinloss Barracks
Hg2702
Well-known member
Is this why you didn’t want to talk about fry ups earlier ?Between jobs have dragged this sorry heap of s**t out the field.
I hate this prick of a thing, every now and then I become stupid enough to attempt to start it and use it. (I'd sell it but for weird reasons related to family and the need to hang on to random worthless s**t I can't)
Brake master cylinder isn't working properly.
Oh and the s**t checkvalves circa jcb 2004 are corroded to f**k. Anyone know someone that'd fit new, or am I going to be best getting the f****ng things cut out
Vinpetrol
Well-known member
Working in Kinloss Barracks
Give us a shout if you need any help !
Give us a shout if you need any help !
Left hooker
Well-known member
V8Druid
do it as well as you can,but learn to do it better
looks like a good day in Cornwall ..... trees aren't flat on the floor ..... they all grow like that anyway down thereBloody half a day of mizzle fecked things up todayView attachment 31719
Footer block 1